az sphere device wifi
Manage Wi-Fi configurations for the attached device.
| Operation | Description |
|---|---|
| az sphere device wifi add | Add a Wi-Fi network on the attached device. |
| az sphere device wifi disable | Disable a Wi-Fi connection on the attached device. |
| az sphere device wifi enable | Enable a Wi-Fi network on the attached device. |
| az sphere device wifi forget | Forget a Wi-Fi network on the attached device. |
| az sphere device wifi list | List the current Wi-Fi configurations for the attached device. |
| az sphere device wifi reload-config | Reload the Wi-Fi network configuration on the attached device. Use this command after you add or remove a certificate (azsphere device certificate) to ensure that EAP-TLS networks use the most recent contents of the certificate store. |
| az sphere device wifi scan | Scan for available Wi-Fi networks visible to the attached device. |
| az sphere device wifi show | Show details of a Wi-Fi network on the attached device. |
| az sphere device wifi show-status | Show the status of the wireless interface on the attached device. |
Commands
az sphere device wifi add
Add a Wi-Fi network on the attached device.
Required Parameters
| Parameter | Description |
|---|---|
| --ssid -s | The SSID of the network to connect to. |
| targeted-scan | Attempt to connect to an SSID even if not advertised. |
| --catalog -c | The Azure Sphere Catalog in which to perform this operation. Specify Azure Sphere Catalog name. You can configure the default Azure Sphere Catalog using az config set defaults.sphere.catalog=<name>. Values from: az sphere catalog list. |
| --resource-group -r | Name of the Azure resource group. You can configure the default group using az config set defaults.group=<name>. Values from: az group list. |
Optional Parameters
| Parameter | Description |
|---|---|
| --client-cert-id | [EAP-TLS] - A string value (up to 16 characters) that identifies the client certificate (containing both the public and private key). Required to set up an EAP-TLS network. |
| --client-id | user@domain [EAP-TLS] ID recognized for authentication by this network's RADIUS server. Required for some EAP-TLS networks. |
| --config-name | A string value (up to 16 characters) that specifies the name for this network configuration. |
| --device -d | The device to run the command on when multiple devices are attached. Specify the ID, IP address, or Local Connection ID of an attached device. Values from: az sphere device list |
| --root-ca-cert-id | [EAP-TLS] - A string value (up to 16 characters) that identifies the server's root CA certificate for EAP-TLS networks where the device authenticates the server. |
| --psk -p | The WPA/WPA2 PSK for the new network. Do not set this if connecting to an open network. |
| --targeted-scan | Attempt to connect to an SSID even if not advertised |
Examples
Add open Wi-Fi network
az sphere device wifi add --ssid
Add a WPA/WPA2 PSK-protected Wi-Fi network
az sphere device wifi add --ssid NETWORK1 --psk EXAMPLEPSK
Add an EAP-TLS Wi-Fi network
az sphere device wifi add --ssid myEapTlsSsid --client-cert-id myClientCert --client-id user@domain.com --root-ca-cert-id myRootCA --config-name Network1
az sphere device wifi disable
Disable a Wi-Fi connection on the attached device.
Required Parameters
| Parameter | Description |
|---|---|
| --id -i | The ID of the network to disable. |
| --catalog -c | The Azure Sphere Catalog in which to perform this operation. Specify Azure Sphere Catalog name. You can configure the default Azure Sphere Catalog using az config set defaults.sphere.catalog=<name>. Values from: az sphere catalog list. |
| --resource-group -r | Name of the Azure resource group. You can configure the default group using az config set defaults.group=<name>. Values from: az group list. |
Optional Parameters
| Parameter | Description |
|---|---|
| --device -d | The device to run the command on when multiple devices are attached. Specify the ID, IP address, or Local Connection ID of an attached device. Values from: az sphere device list |
Examples
Disable configured Wi-Fi network
az sphere device wifi disable --id 1
az sphere device wifi enable
Enable a Wi-Fi network on the attached device.
Required Parameters
| Parameter | Description |
|---|---|
| --id -i | The ID of the network to enable. |
| --catalog -c | The Azure Sphere Catalog in which to perform this operation. Specify Azure Sphere Catalog name. You can configure the default Azure Sphere Catalog using az config set defaults.sphere.catalog=<name>. Values from: az sphere catalog list. |
| --resource-group -r | Name of the Azure resource group. You can configure the default group using az config set defaults.group=<name>. Values from: az group list. |
Optional Parameters
| Parameter | Description |
|---|---|
| --device -d | The device to run the command on when multiple devices are attached. Specify the ID, IP address, or Local Connection ID of an attached device. Values from: az sphere device list |
Examples
Enable configured Wi-Fi network
az sphere device wifi enable --id 1
az sphere device wifi forget
Forget a Wi-Fi network on the attached device.
Required Parameters
| Parameter | Description |
|---|---|
| --id -i | The ID of the network to forget. |
| --catalog -c | The Azure Sphere Catalog in which to perform this operation. Specify Azure Sphere Catalog name. You can configure the default Azure Sphere Catalog using az config set defaults.sphere.catalog=<name>. Values from: az sphere catalog list. |
| --resource-group -r | Name of the Azure resource group. You can configure the default group using az config set defaults.group=<name>. Values from: az group list. |
Optional Parameters
| Parameter | Description |
|---|---|
| --device -d | The device to run the command on when multiple devices are attached. Specify the ID, IP address, or Local Connection ID of an attached device. Values from: az sphere device list |
Examples
Forget configured Wi-Fi network
az sphere device wifi forget --id 1
az sphere device wifi list
List the current Wi-Fi configurations for the attached device.
Required Parameters
| Parameter | Description |
|---|---|
| --catalog -c | The Azure Sphere Catalog in which to perform this operation. Specify Azure Sphere Catalog name. You can configure the default Azure Sphere Catalog using az config set defaults.sphere.catalog=<name>. Values from: az sphere catalog list. |
| --resource-group -r | Name of the Azure resource group. You can configure the default group using az config set defaults.group=<name>. Values from: az group list. |
Optional Parameters
| Parameter | Description |
|---|---|
| --device -d | The device to run the command on when multiple devices are attached. Specify the ID, IP address, or Local Connection ID of an attached device. Values from: az sphere device list |
Examples
List configured Wi-Fi network
az sphere device wifi list
az sphere device wifi reload-config
Reload the Wi-Fi network configuration on the attached device. Use this command after you add or remove a certificate (azsphere device certificate) to ensure that EAP-TLS networks use the most recent contents of the certificate store.
Required Parameters
| Parameter | Description |
|---|---|
| --catalog -c | The Azure Sphere Catalog in which to perform this operation. Specify Azure Sphere Catalog name. You can configure the default Azure Sphere Catalog using az config set defaults.sphere.catalog=<name>. Values from: az sphere catalog list. |
| --resource-group -r | Name of the Azure resource group. You can configure the default group using az config set defaults.group=<name>. Values from: az group list. |
Optional Parameters
| Parameter | Description |
|---|---|
| --device -d | The device to run the command on when multiple devices are attached. Specify the ID, IP address, or Local Connection ID of an attached device. Values from: az sphere device list |
Examples
Reload configured Wi-Fi network
az sphere device wifi reload-config
az sphere device wifi scan
Scan for available Wi-Fi networks visible to the attached device.
Required Parameters
| Parameter | Description |
|---|---|
| --catalog -c | The Azure Sphere Catalog in which to perform this operation. Specify Azure Sphere Catalog name. You can configure the default Azure Sphere Catalog using az config set defaults.sphere.catalog=<name>. Values from: az sphere catalog list. |
| --resource-group -r | Name of the Azure resource group. You can configure the default group using az config set defaults.group=<name>. Values from: az group list. |
Optional Parameters
| Parameter | Description |
|---|---|
| --device -d | The device to run the command on when multiple devices are attached. Specify the ID, IP address, or Local Connection ID of an attached device. Values from: az sphere device list |
Examples
Scan for Wi-Fi networks
az sphere device wifi scan
az sphere device wifi show
Show details of a Wi-Fi network on the attached device.
Required Parameters
| Parameter | Description |
|---|---|
| --id -i | The ID of the network to show details for. |
| --catalog -c | The Azure Sphere Catalog in which to perform this operation. Specify Azure Sphere Catalog name. You can configure the default Azure Sphere Catalog using az config set defaults.sphere.catalog=<name>. Values from: az sphere catalog list. |
| --resource-group -r | Name of the Azure resource group. You can configure the default group using az config set defaults.group=<name>. Values from: az group list. |
Optional Parameters
| Parameter | Description |
|---|---|
| --device -d | The device to run the command on when multiple devices are attached. Specify the ID, IP address, or Local Connection ID of an attached device. Values from: az sphere device list |
Examples
Show details of a configured Wi-Fi network
az sphere device wifi show
az sphere device wifi show-status
Show the status of the wireless interface on the attached device.
Required Parameters
| Parameter | Description |
|---|---|
| --catalog -c | The Azure Sphere Catalog in which to perform this operation. Specify Azure Sphere Catalog name. You can configure the default Azure Sphere Catalog using az config set defaults.sphere.catalog=<name>. Values from: az sphere catalog list. |
| --resource-group -r | Name of the Azure resource group. You can configure the default group using az config set defaults.group=<name>. Values from: az group list. |
Optional Parameters
| Parameter | Description |
|---|---|
| --device -d | The device to run the command on when multiple devices are attached. Specify the ID, IP address, or Local Connection ID of an attached device. Values from: az sphere device list |
Examples
Show status of configured Wi-Fi network
az sphere device wifi show-status