Convert the disk type of an Azure managed disk

$diskName = 'yourDiskName'
# resource group that contains the managed disk
$rgName = 'yourResourceGroupName'
# Choose between Standard_LRS, StandardSSD_LRS, StandardSSD_ZRS, Premium_ZRS, and Premium_LRS based on your scenario
$storageType = 'Premium_LRS'
# Premium capable size 
$size = 'Standard_DS2_v2'

$disk = Get-AzDisk -DiskName $diskName -ResourceGroupName $rgName

# Get parent VM resource
$vmResource = Get-AzResource -ResourceId $disk.ManagedBy

# Stop and deallocate the VM before changing the storage type
Stop-AzVM -ResourceGroupName $vmResource.ResourceGroupName -Name $vmResource.Name -Force

$vm = Get-AzVM -ResourceGroupName $vmResource.ResourceGroupName -Name $vmResource.Name 

# Change the VM size to a size that supports Premium storage
# Skip this step if converting storage from Premium to Standard
$vm.HardwareProfile.VmSize = $size
Update-AzVM -VM $vm -ResourceGroupName $rgName

# Update the storage type
$disk.Sku = [Microsoft.Azure.Management.Compute.Models.DiskSku]::new($storageType)
$disk | Update-AzDisk

Start-AzVM -ResourceGroupName $vm.ResourceGroupName -Name $vm.Name

#resource group that contains the managed disk
rgName='yourResourceGroup'

#Name of your managed disk
diskName='yourManagedDiskName'

#Premium capable size 
#Required only if converting from Standard to Premium
size='Standard_DS2_v2'

#Choose between Standard_LRS, StandardSSD_LRS, StandardSSD_ZRS, Premium_ZRS, and Premium_LRS based on your scenario
sku='Premium_LRS'

#Get the parent VM Id 
vmId=$(az disk show --name $diskName --resource-group $rgName --query managedBy --output tsv)

#Deallocate the VM before changing the size of the VM
az vm deallocate --ids $vmId 

#Change the VM size to a size that supports Premium storage 
#Skip this step if converting storage from Premium to Standard
az vm resize --ids $vmId --size $size

# Update the SKU
az disk update --sku $sku --name $diskName --resource-group $rgName 

az vm start --ids $vmId 

Follow these steps:

1. Sign in to the Azure portal.
2. Select the VM from the list of Virtual machines.
3. If the VM isn't stopped, select Stop at the top of the VM Overview pane, and wait for the VM to stop.
4. In the pane for the VM, select Disks from the menu.
5. Select the disk that you want to convert.
6. Select Size + performance from the menu.
7. Change the Account type from the original disk type to the desired disk type.
8. Select Save, and close the disk pane.

The disk type conversion is instantaneous. You can start your VM after the conversion.

# Name of the resource group that contains the VM
$rgName = 'yourResourceGroup'

# Name of the your virtual machine
$vmName = 'yourVM'

# Choose between Standard_LRS, StandardSSD_LRS, StandardSSD_ZRS, Premium_ZRS, Premium_LRS, and PremiumV2_LRS based on your scenario
$storageType = 'Premium_LRS'

# Premium capable size
# Required only if converting storage from Standard to Premium
$size = 'Standard_DS2_v2'

# Stop and deallocate the VM before changing the size
Stop-AzVM -ResourceGroupName $rgName -Name $vmName -Force

$vm = Get-AzVM -Name $vmName -resourceGroupName $rgName

# Change the VM size to a size that supports Premium storage
# Skip this step if converting storage from Premium to Standard
$vm.HardwareProfile.VmSize = $size
Update-AzVM -VM $vm -ResourceGroupName $rgName

# Get all disks in the resource group of the VM
$vmDisks = Get-AzDisk -ResourceGroupName $rgName 

# For disks that belong to the selected VM, convert to Premium storage
foreach ($disk in $vmDisks)
{
	if ($disk.ManagedBy -eq $vm.Id)
	{
		$disk.Sku = [Microsoft.Azure.Management.Compute.Models.DiskSku]::new($storageType)
		$disk | Update-AzDisk
	}
}

Start-AzVM -ResourceGroupName $rgName -Name $vmName

#resource group that contains the virtual machine
rgName='yourResourceGroup'

#Name of the virtual machine
vmName='yourVM'

#Premium capable size 
#Required only if converting from Standard to Premium
size='Standard_DS2_v2'

#Choose between Standard_LRS, StandardSSD_LRS, StandardSSD_ZRS, Premium_ZRS, and Premium_LRS based on your scenario
sku='Premium_LRS'

#Deallocate the VM before changing the size of the VM
az vm deallocate --name $vmName --resource-group $rgName

#Change the VM size to a size that supports Premium storage 
#Skip this step if converting storage from Premium to Standard
az vm resize --resource-group $rgName --name $vmName --size $size

#Update the SKU of all the data disks 
az vm show -n $vmName -g $rgName --query storageProfile.dataDisks[*].managedDisk -o tsv \
| awk -v sku=$sku '{system("az disk update --sku "sku" --ids "$1)}'

#Update the SKU of the OS disk
az vm show -n $vmName -g $rgName --query storageProfile.osDisk.managedDisk -o tsv \
| awk -v sku=$sku '{system("az disk update --sku "sku" --ids "$1)}'

az vm start --name $vmName --resource-group $rgName

Use either PowerShell or CLI.

The following script migrates a snapshot of a Standard HDD, Standard SSD, or Premium SSD to either an Ultra Disk or a Premium SSD v2.

$diskName = "yourDiskNameHere"
$resourceGroupName = "yourResourceGroupNameHere"
$snapshotName = "yourDesiredSnapshotNameHere"

# Valid values are 1, 2, or 3
$zone = "yourZoneNumber"

#Provide the size of the disks in GB. It should be greater than the VHD file size.
$diskSize = '128'

#Provide the storage type. Use PremiumV2_LRS or UltraSSD_LRS.
$storageType = 'PremiumV2_LRS'

#Provide the Azure region (e.g. westus) where Managed Disks will be located.
#This location should be same as the snapshot location
#Get all the Azure location using command below:
#Get-AzLocation

#Select the same location as the current disk
#Note that Premium SSD v2 and Ultra Disks are only supported in a select number of regions
$location = 'eastus'

#When migrating a Standard HDD, Standard SSD, or Premium SSD to either an Ultra Disk or Premium SSD v2, the logical sector size must be 512
$logicalSectorSize=512

# Get the disk that you need to backup by creating an incremental snapshot
$yourDisk = Get-AzDisk -DiskName $diskName -ResourceGroupName $resourceGroupName

# Create an incremental snapshot by setting the SourceUri property with the value of the Id property of the disk
$snapshotConfig=New-AzSnapshotConfig -SourceUri $yourDisk.Id -Location $yourDisk.Location -CreateOption Copy -Incremental 
$snapshot = New-AzSnapshot -ResourceGroupName $resourceGroupName -SnapshotName $snapshotName -Snapshot $snapshotConfig

$diskConfig = New-AzDiskConfig -SkuName $storageType -Location $location -CreateOption Copy -SourceResourceId $snapshot.Id -DiskSizeGB $diskSize -LogicalSectorSize $logicalSectorSize -Zone $zone
 
New-AzDisk -Disk $diskConfig -ResourceGroupName $resourceGroupName -DiskName $diskName

The following script migrates a snapshot of a Standard HDD, Standard SSD, or Premium SSD to either an Ultra Disk or a Premium SSD v2.

# Declare variables
diskName="yourExistingDiskNameHere"
newDiskName="newDiskNameHere"
resourceGroupName="yourResourceGroupNameHere"
snapshotName="desiredSnapshotNameHere"
#Provide the storage type. Use PremiumV2_LRS or UltraSSD_LRS.
storageType=PremiumV2_LRS
#Select the same location as the current disk
#Note that Premium SSD v2 and Ultra Disks are only supported in a select number of regions
location=eastus
#When migrating a Standard HDD, Standard SSD, or Premium SSD to either an Ultra Disk or Premium SSD v2, the logical sector size must be 512
logicalSectorSize=512
#Select an Availability Zone, acceptable values are 1,2, or 3
zone=1
#Enter your disk size in GiB, disk size cannot be smaller than snapshot size
diskSize=128


# Get the disk you need to create snapshot
yourDiskID=$(az disk show -n $diskName -g $resourceGroupName --query "id" --output tsv)

# Create the snapshot
snapshot=$(az snapshot create -g $resourceGroupName -n $snapshotName --source $yourDiskID --incremental true --query "id" -o tsv)

az disk create -g $resourceGroupName -n $newDiskName --source $snapshot --logical-sector-size $logicalSectorSize --location $location --zone $zone --sku $storageType --size-gb $diskSize 

The following steps assume you already have a snapshot. To learn how to create one, see Create a snapshot of a virtual hard disk.

1. Sign in to the Azure portal.
2. Select the search bar at the top. Search for and select Disks.
3. Select +Create and fill in the details.
4. Make sure the Region and Availability zone meet the requirements of either your Premium SSD v2 or Ultra Disk.
5. For Region select the same region as the snapshot you took.
6. For Source Type select Snapshot.
7. Select the snapshot you created.
8. Select Change size and select either Premium SSD v2 or Ultra Disk for the Storage Type.
9. Select the performance and capacity you'd like the disk to have.
10. Continue to the Advanced tab.
11. Select 512 for Logical sector size (bytes).
12. Select Review+Create and then Create.