Edit

Share via

Work with Warehouse management only mode in Supply Chain Management

  • Article

This article explains how to use Warehouse only mode to perform day-to-day warehousing tasks.

Important

  • This is a preview feature.
  • Preview features aren’t meant for production use and might have restricted functionality. These features are subject to supplemental terms of use, and are available before an official release so that customers can get early access and provide feedback.

Monitor the integration

To monitor the integration between the external systems or legal entities with Microsoft Dynamics 365 Supply Chain Management, go to Warehouse management > Workspaces > Warehouse integration monitoring. From the Warehouse integration monitoring page, you can perform the following tasks:

  • Get an overview of integration messages.
  • Go to pages that have related information and functionality, such as the Message processor messages page.

Maintain inbound shipment orders

To review and maintain your inbound shipment orders, go to Warehouse management > Inbound shipment orders > Inbound shipment orders. The documents that are listed on the Inbound shipment orders page provide information about the expected product receipts. The page provides a Header view and a Lines view of the available shipment orders as seen from Supply Chain Management. For each line, you can view detailed information about the receiving status, inventory transactions, and associated warehouse work. You can also view the receiving status on the order header and lines, and use it to follow the inbound progress of the orders.

The following Receiving status values are available:

  • Open – No quantities have been fully received.
  • Partially received – Some, but not all, quantities have been fully received.
  • Received – All quantities have been fully received.

If you're already familiar with Supply Chain Management, you might recognize that this document resembles a simplified purchase order. However, inbound shipment orders don't make any financial postings for the general ledger.

Warning

For inbound shipment order lines, you can select Update line > Delivery remainder to update expected order line transaction quantities. Make sure that you have the correct user role security privilege for this process, because this update (like message editing) allows for potential inconsistencies between the external systems and Supply Chain Management.

Note

The internal inbound shipment order number must be unique. You can configure the system to use the external order numbers as internal numbers. In this way, you don't have to use a number sequence for the order. To ensure unique numbers across external systems, consider using the Order number prefix/suffix options.

Enable manual inbound shipment order creation

In addition to using entity messages to create inbound shipment orders, you can enable manual inbound shipment order creation for one or more source systems. Users can then create inbound shipment orders directly on the Inbound shipment orders page. To enable manual inbound shipment order creation, go to Warehouse management > Setup > Warehouse management integration > Source systems, and set the Enable manual inbound shipment order creation option to Yes for the relevant source system. This setting activates the New button on the Inbound shipment orders page. For shipment orders that are created without message processing, the Order type field has the value Manual order instead of Inbound shipment order.

Maintain outbound shipment orders

To review and maintain documents that contain information about products that have been requested for dispatch, go to Warehouse management > Outbound shipment orders > Outbound shipment orders. The Outbound shipment orders page provides a Header view and a Lines view of the available shipment orders as seen from Supply Chain Management. For each line, you can view detailed information about the release status, shipment status, inventory transactions, and associated warehouse work. You can also view and edit the release status and shipment status on the order header, and use them to follow the outbound progress of the orders.

The following Release status values are available:

The following Shipment status values are available:

  • Open – No quantities have been shipped confirmed.
  • Partially shipped – Some, but not all, quantities have been shipped confirmed.
  • Shipped – All quantities have been shipped confirmed.

If you're already familiar with Supply Chain Management, you might recognize that this document resembles a simplified sales order that uses some of the same reservation and release to warehouse processes. Use the Source systems settings to control whether you want to automatically trigger reservations when documents are imported, and/or automatically reject shipment orders that can't be partly or fully reserved.

Warning

For outbound shipment order lines, you can select Update line > Delivery remainder to update expected order line transaction quantities. Make sure that you have the correct user role security privilege for this process, because this update (like message editing) allows for potential inconsistencies between the external systems and Supply Chain Management.

Note

The internal outbound shipment order number must be unique. You can configure the system to use the external order numbers as internal numbers. In this way, you don't have to use a number sequence for the order. To ensure unique numbers across external systems, consider using the Order number prefix/suffix options.

Enable manual outbound shipment order creation

In addition to using entity messages to create outbound shipment orders, you can enable manual outbound shipment order creation for one or more source systems. Users can then create inbound shipment orders directly on the Outbound shipment orders page. To enable manual outbound shipment order creation, go to Warehouse management > Setup > Warehouse management integration > Source systems, and set the Enable manual outbound shipment order creation option to Yes for the relevant source system. This setting activates the New button on the Inbound shipment orders page. For shipment orders that are created without message processing, the External order type field has the value Manual order instead of Outbound shipment order.

Receiving completed process

The receiving completed process updates the load status to Received and generates shipment receipts. The shipment receipts then trigger a business event for the external systems.

Workers can manually trigger the receiving completed process from the load by using either the web client or the Warehouse Management mobile app. To enable workers to use the Warehouse Management mobile app, set up a Receiving completed confirmation mobile device menu item. You can add this menu item as part of a detour in the inbound receiving flows.

You can specify whether workers should capture a packing slip ID and date for each shipment that's associated with an inbound load. On the Warehouse management parameters page, on the Loads tab, in the Capture receiving completed packing slip field, select one of the following values to specify the system behavior:

  • Never – Don't prompt for the packing slip ID and date.
  • Always – Prompt for the packing slip ID and date, and allow the worker to proceed only after values they're specified.
  • Optional – Prompt for the packing slip ID and date, but allow the worker to proceed without specifying them.

Note

Depending on your setup on the Inbound shipment order policies FastTab of the Source systems page (Warehouse management > Setup > Warehouse management integration > Source systems), inbound loads might be created in any of the following ways:

  • Automatically, when an inbound shipment order is imported
  • Automatically, when an ASN is imported
  • Via a manual process
  • As part of the Warehouse Management mobile app receiving process
  • As part of an Order receiving completed process, which creates loads for registered inventory transactions that aren't associated with a load. This process is useful when the item arrival journal process is used. It can be triggered directly from an inbound shipment order or via the Inbound shipment order receiving completed background process.

When the system creates load data as a result of processing an inbound shipment order message, the delivery policy controls whether load quantities are adjusted to the received quantities, or whether the received quantities must match the load line quantities, as part of the Receiving completed process.

Shipment receipts

Go to Warehouse management > Inbound shipment orders > Shipment receipts to view the detailed line transactions that are related to received inventory. The data is version controlled, and you can follow the posting status on the header.

The header status is changed from Ready for posting to Posted as part of the Post shipment receipts process automation job. This job is automatically initialized as part of the Source systems setup. The Source systems setup also lets you schedule the batch job to ensure that the related inbound shipment order line transactions are moved to a finalized transaction state for the Warehouse management module.

To view all the background processes that you have running, go to System administration > Setup > Process automations.

Note

You can reverse receiving confirmations only if the related inbound shipment order line transactions haven't yet been finalized.

Warning

If you enable Warehouse management only mode and are already running a periodic Update product receipts batch job for loads that are associated with purchase orders, you probably have to update the query for the batch job to exclude inventory transaction updates for inbound shipment orders. To update the query, add the Load details entity, and specify a NotExist join to the Loads entity. Then add a range definition for the Reference field, where Criteria = Inbound shipment order.

External systems can be informed via business events when new data is available. They can read the data via the following data entities:

  • ShipmentReceiptJournalHeaders – The shipment receipt header data.
  • ShipmentReceiptJournalLines – The shipment receipt line data.
  • ShipmentReceiptTransactionDimensions – The detailed shipment receipt line data.

Shipment packing slips

To view detailed line transactions that are related to shipped inventory, and to print a report, go to Warehouse management > Outbound shipment orders > Shipment packing slips, and select Preview/Print. To control the printed inventory dimension values, go to Warehouse management > Setup > Warehouse management parameters, and then, on the Reports tab, select an option for Shipment packing slip.

Shipment packing slip data is version controlled, and you can follow the posting status on the header. The Posting status value is changed from Ready for posting to Posted as part of the Post shipment packing slips process automation job. This job is automatically initialized as part of the Source systems setup. The Source systems setup also lets you schedule the batch job to ensure that related outbound shipment order line transactions are moved to a finalized transaction state for the Warehouse management module.

To view all the background processes that you have running, go to System administration > Setup > Process automations.

Note

If no language is defined for an order, the report uses the company-specific language settings.

External systems can be informed via business events when new data is available. They can read the data via the following data entities:

  • ShipmentPackingSlipJournalHeaders – The shipment packing slip header data.
  • ShipmentPackingSlipJournalLines – The shipment packing slip line data.
  • ShipmentPackingSlipTransactionDimensions – The detailed shipment packing slip line data.

Note

You can reverse the shipment confirmation only if the related outbound shipment order line transactions haven't yet been finalized.

View and maintain shipment order messages

In Warehouse management only mode, you can view, update, and create shipment order messages. Therefore, you can quickly test integrations during the implementation process. When an externally created message is in a Failed message state, you can update all field values except the order header and line numbers. Go to one of the following pages to view and maintain the messages:

  • Warehouse management > Inbound shipment orders > Inbound shipment order messages
  • Warehouse management > Outbound shipment orders > Outbound shipment order messages

To try out the process of creating inbound and outbound shipment orders via messages, set the Enable manual outbound shipment order message creation and Enable manual inbound shipment order message creation options to Yes for the relevant Source system record. You can then create shipment order messages directly on the Outbound shipment order messages and Inbound shipment order messages pages. In addition, you can follow the Message origin value, which can be Manual entry or Integration.

Use the Processing status field to monitor the progress of each shipment order message. The following Processing status values are available:

  • Receiving – The message is in the process of being imported.
  • Received – The message has been received and is in a Queued state in the message processor. It's now ready to be picked up for processing.
  • Accepted – The message processor state is Processed. Therefore, a shipment order has been created.
  • Failed – The message processor processed the message, but one or more errors occurred. You can create a copy of the message when you save it after you edit it.
  • Draft – The message is a manually copied or created message that can be updated. To reprocess the message, move it into the Queued message state by selecting Queue on the Action Pane.
  • Canceled – The message has been manually canceled.

Tip

Select Show old versions to follow manual message updates based on the value of the Replaced by message field.

Warning

In a production environment, manually entered messages and field updates can cause data inconsistencies between the external source system and Supply Chain Management. For example, you might change an item number to a value that isn't known to the external system. This type of update will probably cause issues in progress information flows. The issues might even be impossible to correct in the external system. We recommend that you use user roles and security privileges to restrict access to this functionality to as few people as possible.