Set-ADAccountControl

Specifies whether the security context of the user is delegated to a service. When this parameter is set to true, the security context of the account is not delegated to a service even when the service account is set as trusted for Kerberos delegation. This parameter sets the AccountNotDelegated property for an Active Directory account. This parameter also sets the ADS_UF_NOT_DELEGATED flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include

$false or 0

$true or 1

The following example shows how to set this parameter so that the security context of the account is not delegated to a service.

-AccountNotDelegated $true

Specifies whether reversible password encryption is allowed for the account. This parameter sets the AllowReversiblePasswordEncryption property of the account. This parameter also sets the ADS_UF_ENCRYPTED_TEXT_PASSWORD_ALLOWED flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include:

$false or 0

$true or 1

The following example shows how to set this parameter to true.

-AllowReversiblePasswordEncryption $true

Specifies the authentication method to use. Possible values for this parameter include:

Negotiate or 0

Basic or 1

The default authentication method is Negotiate.

A Secure Sockets Layer (SSL) connection is required for the Basic authentication method.

The following example shows how to set this parameter to Basic.

-AuthType Basic

Modifies the ability of an account to change its password. To disallow password change by the account set this to $true.. This parameter changes the Boolean value of the CannotChangePassword property of an account.

The following example shows how to specify the PasswordCannotChange parameter.

-CannotChangePassword $false

Prompts you for confirmation before running the cmdlet.

Specifies the user account credentials to use to perform this task. The default credentials are the credentials of the currently logged on user unless the cmdlet is run from an Active Directory PowerShell provider drive. If the cmdlet is run from such a provider drive, the account associated with the drive is the default.

To specify this parameter, you can type a user name, such as "User1" or "Domain01\User01" or you can specify a PSCredential object. If you specify a user name for this parameter, the cmdlet prompts for a password.

You can also create a PSCredential object by using a script or by using the Get-Credential cmdlet. You can then set the Credential parameter to the PSCredential object The following example shows how to create credentials.

$AdminCredentials = Get-Credential "Domain01\User01"

The following shows how to set the Credential parameter to these credentials.

-Credential $AdminCredentials

If the acting credentials do not have directory-level permission to perform the task, Active Directory PowerShell returns a terminating error.

Specifies whether Kerberos pre-authentication is required to logon using the user or computer account. This parameter sets the ADS_UF_DONT_REQUIRE_PREAUTH flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include:

$false or 0

$true or 1

The following example shows how to set this parameter so that Kerberos pre-authentication is required to logon to the account.

-DoesNotRequirePreAuth $false

Specifies if an account is enabled. An enabled account requires a password. This parameter sets the Enabled property for an account object. This parameter also sets the ADS_UF_ACCOUNTDISABLE flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include:

$false or 0

$true or 1

The following example shows how to set this parameter to enable the account.

-Enabled $true

Specifies whether a home directory is required for the account. This parameter sets the ADS_UF_HOMEDIR_REQUIRED flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include:

$false or 0

$true or 1

The following example shows how to set this parameter so that a home directory is not required for the account.

-HomedirRequired $false

Distinguished Name

Example: CN=SaraDavis ,CN=Users,DC=corp,DC=contoso,DC=com

GUID (objectGUID)

Example: 599c3d2e-f72d-Specifies an Active Directory account object by providing one of the following property values. The identifier in parentheses is the LDAP display name for the attribute.4d20-8a88-030d99495f20

Security Identifier (objectSid)

Example: S-1-5-21-3165297888-301567370-576410423-1103

SAM Account Name (sAMAccountName)

Example: saradavis

The cmdlet searches the default naming context or partition to find the object. If two or more objects are found, the cmdlet returns a non-terminating error.

This parameter can also get this object through the pipeline or you can set this parameter to an account object instance.

Derived types such as the following are also accepted:

Microsoft.ActiveDirectory.Management.ADUser

Microsoft.ActiveDirectory.Management.ADComputer

Microsoft.ActiveDirectory.Management.ADServiceAccount

This example shows how to set the parameter to a distinguished name.

-Identity "CN=saradavis,CN=Users,DC=corp,DC=contoso,DC=com"

This example shows how to set this parameter to an account object instance named "accountInstance".

-Identity $accountInstance

Specifies whether the account is a Majority Node Set (MNS) logon account. This parameter also sets the ADS_UF_MNS_LOGON_ACCOUNT flag of the Active Directory User Account Control (UAC) attribute. Possible values for this parameter include:

$false or 0

$true or 1

You can use MNS logon accounts to configure a multi-node cluster without using a shared disk drive.

The following example shows how to set this parameter to identify this account as an MNS account.

-MSNLogonAccount $true

Specifies the distinguished name of an Active Directory partition. The distinguished name must be one of the naming contexts on the current directory server. The cmdlet searches this partition to find the object defined by the Identity parameter.

The following two examples show how to specify a value for this parameter.

-Partition "CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"

-Partition "CN=Schema,CN=Configuration,DC=EUROPE,DC=TEST,DC=CONTOSO,DC=COM"

In many cases, a default value will be used for the Partition parameter if no value is specified. The rules for determining the default value are given below. Note that rules listed first are evaluated first and once a default value can be determined, no further rules will be evaluated.

In AD DS environments, a default value for Partition will be set in the following cases: - If the Identity parameter is set to a distinguished name, the default value of Partition is automatically generated from this distinguished name.

• If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically generated from the current path in the drive.
• If none of the previous cases apply, the default value of Partition will be set to the default partition or naming context of the target domain.

In AD LDS environments, a default value for Partition will be set in the following cases:

• If the Identity parameter is set to a distinguished name, the default value of Partition is automatically generated from this distinguished name.
• If running cmdlets from an Active Directory provider drive, the default value of Partition is automatically generated from the current path in the drive.
• If the target AD LDS instance has a default naming context, the default value of Partition will be set to the default naming context. To specify a default naming context for an AD LDS environment, set the msDS-defaultNamingContext property of the Active Directory directory service agent (DSA) object (nTDSDSA) for the AD LDS instance.
• If none of the previous cases apply, the Partition parameter will not take any default value.

Returns the new or modified object. By default (i.e. if -PassThru is not specified), this cmdlet does not generate any output.

Specifies whether the password of an account can expire. This parameter sets the PasswordNeverExpires property of an account object. This parameter also sets the ADS_UF_DONT_EXPIRE_PASSWD flag of the Active Directory User Account Control attribute. Possible values for this parameter include:

$false or 0

$true or 1

Note: This parameter cannot be set to $true or 1 for an account that also has the ChangePasswordAtLogon property set to true.

The following example shows how to set this parameter so that the password can expire.

-PasswordNeverExpires $false

Specifies whether the account requires a password. This parameter sets the PasswordNotRequired property of an account, such as a user or computer account. This parameter also sets the ADS_UF_PASSWD_NOTREQD flag of the Active Directory User Account Control attribute. Possible values for this parameter are:

$false or 0

$true or 1

The following example shows how to set this parameter so that as password is not required for the account.

-PasswordNotRequired $true

Specifies the Active Directory Domain Services instance to connect to, by providing one of the following values for a corresponding domain name or directory server. The service may be any of the following: Active Directory Lightweight Domain Services, Active Directory Domain Services or Active Directory Snapshot instance.

Domain name values:

Fully qualified domain name

Examples: corp.contoso.com

NetBIOS name

Example: CORP

Directory server values:

Fully qualified directory server name

Example: corp-DC12.corp.contoso.com

NetBIOS name

Example: corp-DC12

Fully qualified directory server name and port

Example: corp-DC12.corp.contoso.com:3268

The default value for the Server parameter is determined by one of the following methods in the order that they are listed:

-By using Server value from objects passed through the pipeline.

-By using the server information associated with the Active Directory PowerShell provider drive, when running under that drive.

-By using the domain of the computer running Powershell.

The following example shows how to specify a full qualified domain name as the parameter value.

-Server "corp.contoso.com"

Specifies whether an account is trusted for Kerberos delegation. A service that runs under an account that is trusted for Kerberos delegation can assume the identity of a client requesting the service. This parameter sets the TrustedForDelegation property of an account object. This value also sets the ADS_UF_TRUSTED_FOR_DELEGATION flag of the Active Directory User Account Control attribute. Possible values for this parameter are:

$false or 0

$true or 1

The following example shows how to specify that an account is trusted for Kerberos delegation.

-TrustedForDelegation $true

Specifies whether an account is enabled for delegation. When this parameter is set to true, a service running under such an account can impersonate a client on other remote servers on the network. This parameter sets the ADS_UF_TRUSTED_TO_AUTHENTICATE_FOR_DELEGATION flag of the Active Directory User Account Control attribute. Possible values for this parameter are:

$false or 0

$true or 1

The following example shows how to set this parameter so that the account is enabled for delegation.

-TrustedToAuthForDelegation $true

Specifies whether an account is restricted to use only Data Encryption Standard (DES) encryption types for keys. This parameter sets the

ADS_UF_USE_DES_KEY_ONLY flag of the Active Directory User Account Control attribute. Possible values for this parameter are:

$false or 0

$true or 1

The following example shows how to set this parameter so that an account must use DES encryption types for keys.

-UseDESKeyOnly $true

Shows what would happen if the cmdlet runs. The cmdlet is not run.