Set-DnsServerDiagnostics
Sets debugging and logging parameters.
Syntax
Set-DnsServerDiagnostics
[-ComputerName <String>]
[-PassThru]
[-Answers <Boolean>]
[-EventLogLevel <UInt32>]
[-FullPackets <Boolean>]
[-IPFilterList <IPAddress[]>]
[-LogFilePath <String>]
[-MaxMBFileSize <UInt32>]
[-EnableLoggingForRemoteServerEvent <Boolean>]
[-EnableLoggingForPluginDllEvent <Boolean>]
[-UseSystemEventLog <Boolean>]
[-EnableLogFileRollover <Boolean>]
[-EnableLoggingForZoneLoadingEvent <Boolean>]
[-EnableLoggingForLocalLookupEvent <Boolean>]
[-EnableLoggingToFile <Boolean>]
[-EnableLoggingForZoneDataWriteEvent <Boolean>]
[-EnableLoggingForTombstoneEvent <Boolean>]
[-EnableLoggingForRecursiveLookupEvent <Boolean>]
[-UdpPackets <Boolean>]
[-UnmatchedResponse <Boolean>]
[-Updates <Boolean>]
[-WriteThrough <Boolean>]
[-SaveLogsToPersistentStorage <Boolean>]
[-EnableLoggingForServerStartStopEvent <Boolean>]
[-Notifications <Boolean>]
[-Queries <Boolean>]
[-QuestionTransactions <Boolean>]
[-ReceivePackets <Boolean>]
[-SendPackets <Boolean>]
[-TcpPackets <Boolean>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-DnsServerDiagnostics
[-ComputerName <String>]
[-PassThru]
[-DebugLogging <UInt32>]
[-OperationLogLevel2 <UInt32>]
[-OperationLogLevel1 <UInt32>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-DnsServerDiagnostics
[-ComputerName <String>]
[-PassThru]
-All <Boolean>
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-DnsServerDiagnostics cmdlet sets debugging and logging parameters on a Domain Name System (DNS) server.
If you enable debug logging (set the FullPackets parameter to $True), you must satisfy the following conditions:
Set the ReceivePackets parameter or the SendPackets parameter to $True., and:
Set the TcpPackets parameter or the UdpPackets parameter to $True, and:
Set the Notifications parameter, the Queries parameter, or the Updates parameter to $True, and:
Set the QuestionTransactions parameter or the Answers parameter to $True.
If you use the first parameter set, you must specify at least one of the options in each of the following entries:
ReceivePackets, SendPackets
TcpPackets, UdpPackets
Notifications, Updates, Queries
QuestionTransactions, Answers
The All parameter set enables all options except for the following: LogFilePath, MaxMBFileSize, EventLogLevel, FilterIpAddrList, UseSystemEventLog, and EnableLogFileRollover.
Use the third parameter to enable diagnostics at a more detailed level.
Examples
Example 1: Enable diagnostics for outgoing TCP responses for updates
PS C:\>Set-DnsServerDiagnostics -SendPackets $true -TcpPackets $true -Answers $true -Updates $trueThis command enables the diagnostics of outgoing TCP responses for updates.
Example 2: Enable all diagnostic options except for LogFilePath
PS C:\>Set-DnsServerDiagnostics -All $trueThis command enables all options for DNS server diagnostics except for LogFilePath.
Example 3: Log send packets
PS C:\>Set-DnsServerDiagnostics -DebugLogging 0x10000This command logs send packages.
Example 4: Reset debugging settings
PS C:\>Get-DnsServerDiagnostics -ComputerName "DNSServer01" | select -TcpPackets, -UdpPackets | Set-DnsServerDiagnostics -ComputerName "DNSServer02"This command resets the TCP packet debugging and UDP packet debugging options on DNSServer02 to their values on DNSServer01.
Parameters
-All
Controls whether the DNS server logs all events.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Answers
Enables the logging of DNS responses when you set the value to $True.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-AsJob
ps_cimcommon_asjob
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies a DNS server. The acceptable values for this parameter are: an IPv4 address, an IPv6 address, and any other value that resolves to an IP address, such as fully qualified domain name (FQDN), Hostname, or NETBIOS name.
| Type: | String |
| Aliases: | Cn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DebugLogging
Specifies the bitmask for debug logging. Valid values are:
- 0x00000001. The server logs query packet exchanges.
- 0x00000010. The server logs packet exchanges that are related to zone exchanges.
- 0x00000020. The server logs packet exchanges that are related to zone updates.
- 0x00000100. The server logs packets that contain questions.
- 0x00000200. The server logs packets that contain answers.
- 0x00001000. The server logs packets that it sends.
- 0x00002000. The server logs packets that it receives.
- 0x00004000. The server logs User Datagram Protocol (UDP) packet exchanges.
- 0x00008000. The server logs Transmission Control Protocol (TCP) packet exchanges.
- 0x0000FFFF. The server logs operations if you set the following fields to $True: 0x00001000, 0x00002000, 0x00008000, 0x00004000, 0x00000001, 0x00000001, 0x00000020, 0x00000100, and 0x00000200S.
- 0x00010000. Independent of other field values, this bitmap logs Active Directory write operations.
- 0x00020000. Independent of other field values, this bitmap logs Active Directory polling operations and operations that occur during DNS updates (secure and not secure) on Active Directory-integrated zones.
- 0x01000000. If other field values allow it, the server logs the entire packet to the log file.
- 0x02000000. If other field values allow it, the server logs response packets that do not match any outstanding queries.
- 0x80000000. If other field values allow it, the server saves packet logging information to persistent storage.
| Type: | UInt32 |
| Position: | Named |
| Default value: | 0xFFFFFFFF |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLogFileRollover
Sets a bit flag to enable log file rollover.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLoggingForLocalLookupEvent
Controls whether the DNS server logs local lookup events.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLoggingForPluginDllEvent
Controls whether the DNS server logs dynamic link library (DLL) plug-in events.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLoggingForRecursiveLookupEvent
Controls whether the DNS server logs recursive lookup events.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLoggingForRemoteServerEvent
Controls whether the DNS server logs remote server events.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLoggingForServerStartStopEvent
Controls whether the DNS server logs server start and stop events.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLoggingForTombstoneEvent
Controls whether the DNS server logs tombstone events.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLoggingForZoneDataWriteEvent
Controls whether the DNS server logs zone data write events.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLoggingForZoneLoadingEvent
Controls whether the DNS server logs zone load events.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableLoggingToFile
Controls whether the DNS server logs logging-to-file.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EventLogLevel
Specifies an event log level. Valid values are:
- 0: No Events
- 1: Errors Only
- 2: Errors and warnings
- 3-7: All Events
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-FullPackets
Controls whether the DNS server logs full packets.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IPFilterList
Specifies an array of IP addresses to filter. When you enable logging, traffic to and from these IP addresses is logged. If you do not specify any IP addresses, traffic to and from all IP addresses is logged.
| Type: | IPAddress[] |
| Aliases: | FilterIPAddressList |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-LogFilePath
Specifies a log file path.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-MaxMBFileSize
Specifies the maximum size of the log file. This parameter is relevant if you set EnableLogFileRollover and EnableLoggingToFile to $True.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Notifications
Controls whether the DNS server logs notifications.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-OperationLogLevel1
Sets a bit flag for the logging level. Valid values are:
- 0x00000001. The DNS server saves operational logging information to persistent storage.
- 0x00000010. The DNS server logs event logging information to a log file.
- 0x00000020. The DNS server logs operational logging information for server start and stop activities to the log file.
- 0x00002000. The DNS server logs operational logging information for activities that are related to loading a zone from a directory server to the log file.
- 0x00004000. The DNS server logs operational logging information for activities that are related to writing zone data to the directory server to the log file.
- 0x00020000. The DNS server logs operational logging information for activities that are related to updating nodes that have exceeded the tombstone lifetime to the log file.
- 0x00100000. The DNS server logs operational logging information for local resource lookup activities to the log file.
- 0x00200000. The DNS server logs operational logging information for activities that occur during recursive query lookup to the log file.
- 0x00400000. The DNS server logs operational logging information for activities that are related to interaction with remote name servers to the log file.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-OperationLogLevel2
Specifies the additional operations that the DNS server logs. The default valid value is:
0x01000000. Valid values for this parameter are: 0x01, 0x02, and 0x03.The DNS server logs operational logging information for activities that are related to interaction with plug-in DLLs to the log file.
| Type: | UInt32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Queries
Controls whether the DNS server allows query packet exchanges to pass through the content filter, such as the IPFilterList parameter.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-QuestionTransactions
Controls whether the DNS server logs queries.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ReceivePackets
Controls whether the DNS server logs receive packets.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-SaveLogsToPersistentStorage
Controls whether the DNS server saves logs to persistent storage.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-SendPackets
Controls whether the DNS server logs send packets.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-TcpPackets
Controls whether the DNS server logs TCP packets.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UdpPackets
Controls whether the DNS server logs UDP packets.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-UnmatchedResponse
Controls whether the DNS server logs unmatched responses.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-Updates
Controls whether the DNS server logs updates.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-UseSystemEventLog
Controls whether the DNS server uses the system event log for logging.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WriteThrough
Controls whether the DNS server logs write-throughs.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |