Add-SCVMHostNetworkAdapter

Syntax

Add-SCVMHostNetworkAdapter
   -VirtualNetwork <VirtualNetwork>
   [-VLanEnabled]
   [-VLanMode <VlanMode>]
   [-VLanID <UInt16>]
   [-VLanTrunkID <UInt16[]>]
   [-VMHostNetworkAdapter] <HostNetworkAdapter>
   [-JobGroup <Guid>]
   [-RunAsynchronously]
   [-PROTipID <Guid>]
   [-JobVariable <String>]
   [<CommonParameters>]

Description

The Add-SCVMHostNetworkAdapter cmdlet adds a physical network adapter (also called a network interface card, or NIC) on a host managed by Virtual Machine Manager (VMM) to a virtual network. Each virtual machine on that host can also connect through a virtual network adapter to that virtual network.

A virtual network configured on a host can connect to multiple virtual network adapters on virtual machines deployed on that host.

VMM for System Center 2019 includes virtual networking support for configuring one or more Virtual Local Area Networks (VLANs) on a host. You can use the Add-SCVMHostNetworkAdapter cmdlet or the Set-SCVMHostNetworkAdapter cmdlet to configure a single VLAN or multiple VLANs on a host. To configure corresponding VLAN settings on a virtual machine, use the New-SCVirtualNetworkAdapter cmdlet or the Set-SCVirtualNetworkAdapter cmdlet.

For an illustration of each type of VLAN, see the examples for this cmdlet.

Examples

Example 1: Add a physical host network adapter to a virtual network

PS C:\> $VMHost = Get-SCVMHost -ComputerName "VMHost01.Contoso.com"
PS C:\> $VirtualNetwork = Get-SCVirtualNetwork -VMHost $VMHost -Name "ExternalVirtualNetwork01"
PS C:\> $VMHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $VMHost -Name "HostAdapter01"
PS C:\> Add-SCVMHostNetworkAdapter -VirtualNetwork $VirtualNetwork -VMHostNetworkAdapter $VMHostNetworkAdapter

The first command gets the host object named VMHost01 and stores the object in the $VMHost variable.

The second command gets the virtual network object named ExternalVirtualNetwork01 on VMHost01 and stores the object in the $VirtualNetwork variable.

The third command gets the physical network adapter object named HostAdapter01 on VMHost01 and stores the object in the $VMHostNetworkAdapter variable.

The last command adds HostAdapter01 to ExternalVirtualNetwork01.

Note: You can add only one physical host adapter per virtual network. Therefore, the last command will fail if an adapter is already associated with the specified virtual network. To add a new adapter to the virtual network, you must first remove the existing host adapter.

Example 2: Add a physical host network adapter to a VLAN that uses "Trunk" mode

PS C:\> $VMHost = Get-SCVMHost -ComputerName "VMHost02"
PS C:\> $VirtualNetwork = Get-SCVirtualNetwork -VMHost $VMHost -Name "ExternalNetwork02"
PS C:\> $VMHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $VMHost -Name "HostAdapter02"
PS C:\> Add-SCVMHostNetworkAdapter -VirtualNetwork $VirtualNetwork -VMHostNetworkAdapter $VMHostNetworkAdapter -VLANEnabled -VLANMode "Trunk" -VLANTrunkID 1,2,100,200,1124

The first command gets the host object named VMHost02 and stores the object in the $VMHost variable.

The second command gets the virtual network object named ExternalNetwork02 on VMHost02 and stores the object in the $VirtualNetwork variable.

The third command gets the network adapter object named HostAdapter02 on VMHost02 and stores the adapter object in the $VMHostNetworkAdapter variable.

The last command adds HostAdapter02 to virtual network ExternalNetwork02 and enables access from ExternalNetwork02 to an external networking device using 802.1Q tagged VLANs 1, 2, 100, 200, and 1124.

Note: You can add only one host adapter per virtual network, so the last command will fail if an adapter is already associated with the specified virtual network.

Example 3: Add a physical host network adapter to a VLAN that uses "Access" mode

PS C:\> $VMHost = Get-SCVMHost -ComputerName "VMHost03.Contoso.com"
PS C:\> $VirtualNetwork = Get-SCVirtualNetwork -VMHost $VMHost -Name "ExternalVirtualNetwork03"
PS C:\> $VMHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $VMHost -Name "HostAdapter03"
PS C:\> Add-SCVMHostNetworkAdapter -VirtualNetwork $VirtualNetwork -VMHostNetworkAdapter $VMHostNetworkAdapter -VLanEnabled -VLanMode "Access" -VLanID 22

The first command gets the host object named VMHost03 and stores the object in the $VMHost variable.

The second command gets the virtual network object named ExternalNetwork03 on VMHost03 and stores the object in the $VirtualNetwork variable.

The third command gets the network adapter object named HostAdapter03 on VMHost03 and stores the adapter object in the$VMHostNetworkAdapter variable.

The last command adds HostAdapter03 to virtual network ExternalNetwork03 and restricts access to ExternalNetwork03 to VLANID 22.

Note: You can add only one host adapter per virtual network, so the last command will fail if an adapter is already associated with the specified virtual network.

Caution: This example assumes that that your host is already connected to a VLAN or, if not, ensure that your host has two network adapters. If your host has a single network adapter, assigning the adapter to a VLAN that is unavailable to the VMM server will prevent VMM from managing the host. You can perform the steps in this example on a host that has only one network adapter if you first install the Microsoft Loopback Adapter on your server.

Parameters

-JobGroup

-JobVariable

-PROTipID

-RunAsynchronously

-VirtualNetwork

-VLanEnabled

-VLanID

-VLanMode

-VLanTrunkID

-VMHostNetworkAdapter

Outputs

VMHostNetworkAdapter

This cmdlet returns a VMHostNetworkAdapter object.

Related Links

• Get-SCVirtualNetwork
• Get-SCVMHost
• Get-SCVMHostNetworkAdapter
• Remove-SCVMHostNetworkAdapter
• Set-SCVMHostNetworkAdapter