Set-SCVPNConnection

Reference

Module:: VirtualMachineManager

Sets the properties of a VPN connection.

Syntax

Set-SCVPNConnection
   [-VMMServer <ServerConnection>]
   [-VPNConnection] <VPNConnection>
   [-Name <String>]
   [-Description <String>]
   [-TargetIPv4VPNAddress <String>]
   [-TargetIPv6VPNAddress <String>]
   [-EncryptionMethod <VPNEncryptionMethod>]
   [-IntegrityCheckMethod <VPNIntegrityCheckMethod>]
   [-CipherTransformConstants <VPNCipherTransformConstants>]
   [-AuthenticationTransformConstants <VPNAuthenticationTransformConstants>]
   [-PFSGroup <VPNPFSGroup>]
   [-DHGroup <VPNDHGroup>]
   [-AuthenticationMethod <VPNAuthenticationMethod>]
   [-Secret <RunAsAccount>]
   [-Certificate <ClientCertificate>]
   [-IPSecMainSALifeTimeSeconds <UInt32>]
   [-IPSecMainSALifeTimeKiloBytes <UInt32>]
   [-IPSecQuickSALifeTimeSeconds <UInt32>]
   [-IPSecQuickSALifeTimeKiloBytes <UInt32>]
   [-IPSecIdleDisconnectSeconds <UInt32>]
   [-LocalTrafficSelectors <TrafficSelector[]>]
   [-RemoveLocalTrafficSelectors]
   [-RemoteTrafficSelectors <TrafficSelector[]>]
   [-RemoveRemoteTrafficSelectors]
   [-Status <GatewayConnectionStatus>]
   [-MaximumBandwidthInboundKbps <UInt64>]
   [-MaximumBandwidthOutboundKbps <UInt64>]
   [-RemoveMaximumBandwidthInbound]
   [-RemoveMaximumBandwidthOutbound]
   [-RunAsynchronously]
   [-PROTipID <Guid>]
   [-JobVariable <String>]
   [-OnBehalfOfUser <String>]
   [-OnBehalfOfUserRole <UserRole>]
   [<CommonParameters>]

Set-SCVPNConnection
   [-VMMServer <ServerConnection>]
   [-VPNConnection] <VPNConnection>
   [-NextHopNetwork <VMNetwork>]
   [-Name <String>]
   [-Description <String>]
   [-Status <GatewayConnectionStatus>]
   [-MaximumBandwidthInboundKbps <UInt64>]
   [-MaximumBandwidthOutboundKbps <UInt64>]
   [-RemoveMaximumBandwidthInbound]
   [-RemoveMaximumBandwidthOutbound]
   [-IPAddresses <String[]>]
   [-PeerIPAddresses <String[]>]
   [-RunAsynchronously]
   [-PROTipID <Guid>]
   [-JobVariable <String>]
   [-OnBehalfOfUser <String>]
   [-OnBehalfOfUserRole <UserRole>]
   [<CommonParameters>]

Set-SCVPNConnection
   [-VMMServer <ServerConnection>]
   [-VPNConnection] <VPNConnection>
   [-Name <String>]
   [-Description <String>]
   [-TargetIPv4VPNAddress <String>]
   [-TargetIPv6VPNAddress <String>]
   [-Status <GatewayConnectionStatus>]
   [-MaximumBandwidthInboundKbps <UInt64>]
   [-MaximumBandwidthOutboundKbps <UInt64>]
   [-RemoveMaximumBandwidthInbound]
   [-RemoveMaximumBandwidthOutbound]
   [-GRETunnel]
   [-GREKey <UInt32>]
   [-GREIPv4Address <String>]
   [-GREIPv6Address <String>]
   [-RunAsynchronously]
   [-PROTipID <Guid>]
   [-JobVariable <String>]
   [-OnBehalfOfUser <String>]
   [-OnBehalfOfUserRole <UserRole>]
   [<CommonParameters>]

Description

The Set-SCVPNConnection cmdlet updates the properties of a virtual private network (VPN) connection.

Examples

Example 1: Modify a VPN connection

PS C:\> $VmNetworkGateway = Get-SCVMNetworkGateway -Name "VMGateway01"
PS C:\> $VPNConnection = Get-SCVPNConnection -VMNetworkGateway $VmNetworkGateway -Name "VPN01"
PS C:\> $RunAsAccount = Get-SCRunAsAccount -ID "972567d5-96ad-472e-9790-831bae5fd69c" 
PS C:\> $VpnConnection = Set-SCVPNConnection -AuthenticationMethod "PSKOnly" -AuthenticationTransformConstants "SHA196" -CipherTransformConstants "AES256" -DHGroup "Group2" -EncryptionMethod "AES256" -IntegrityCheckMethod "SHA1" -PFSGroup "PFS2048" -Name "IPSec" -TargetIPv4VPNAddress "100.100.100.200" -VPNConnection $VPNConnection -Secret $RunAsAccount

The first command gets a network gateway named VMGateway01, and then stores it in the $VmNetworkGateway variable.

The second command gets a VPN connection on the gateway in $VmNetworkGateway, and then stores it in the $VPNConnection variable.

The third command gets a Run As account, and then stores it in the $RunAsAccount variable. This account is used to modify the VPN connection.

The final command modifies the VPN connection in $VPNConnection. It specifies new values for several parameters.

Parameters

-AuthenticationMethod

Specifies a virtual private network (VPN) authentication method. Valid values are: PSKOnly, MachineCertificates.

Type:	VPNAuthenticationMethod
Accepted values:	PSKOnly, MachineCertificates
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-AuthenticationTransformConstants

Specifies a virtual private network (VPN) transform constant. Valid values are:

SHA256128
MD596
SHA196
GCMAES128
GCMAES192
GCMAES256

Type:	VPNAuthenticationTransformConstants
Accepted values:	SHA256128, MD596, SHA196, GCMAES128, GCMAES192, GCMAES256, SHA256, None
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Certificate

Specifies a security certificate object.

Type:	ClientCertificate
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CipherTransformConstants

Specifies a virtual private network cipher transform constants. Valid values are:

DES
DES3
AES128
AES192
AES256
GCMAES128
GCMAES192
GCMAES256

Type:	VPNCipherTransformConstants
Accepted values:	DES, DES3, AES128, AES192, AES256, GCMAES128, GCMAES192, GCMAES256, None
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Description

Specifies a description for the VPN connection.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DHGroup

Specifies a virtual private network (VPN) Diffie-Hellman (DH) group. Valid values are:

None
Group1
Group2
Group14
ECP256
ECP384
Group24

Type:	VPNDHGroup
Accepted values:	None, Group1, Group2, Group14, ECP256, ECP384, Group24
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-EncryptionMethod

Specifies a virtual private network (VPN) encryption method. Valid values are:

DES
DES3
AES128
AES192
AES256

Type:	VPNEncryptionMethod
Accepted values:	DES, DES3, AES128, AES192, AES256, CBCDES, CBCDES3, AES128CBC, AES192CBC, AES256CBC, GCMAES128, GCMAES192, GCMAES256
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-GREIPv4Address

Specifies a Generic Route Encapsulation (GRE) IPv4 address.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-GREIPv6Address

Specifies a GRE IPv6 address.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-GREKey

Specifies a GRE key.

Type:	UInt32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-GRETunnel

Indicates that this cmdlet uses a GRE tunnel.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-IntegrityCheckMethod

Specifies a virtual private network (VPN) integrity check method. Valid values are:

MD5
SHA1
SHA256
SHA384

Type:	VPNIntegrityCheckMethod
Accepted values:	MD5, SHA1, SHA256, SHA384, SHA196
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IPAddresses

Type:	String[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IPSecIdleDisconnectSeconds

Type:	UInt32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IPSecMainSALifeTimeKiloBytes

Type:	UInt32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IPSecMainSALifeTimeSeconds

Type:	UInt32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IPSecQuickSALifeTimeKiloBytes

Type:	UInt32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IPSecQuickSALifeTimeSeconds

Type:	UInt32
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-JobVariable

Specifies that job progress is tracked and stored in the variable named by this parameter.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-LocalTrafficSelectors

Type:	TrafficSelector[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-MaximumBandwidthInboundKbps

Specifies, in kbps, the maximum inbound bandwidth.

Type:	UInt64
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-MaximumBandwidthOutboundKbps

Specifies, in kbps, the maximum outbound bandwidth.

Type:	UInt64
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Name

Specifies the name of a VMM object.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-NextHopNetwork

Specifies a VMNetwork object.

Type:	VMNetwork
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-OnBehalfOfUser

Specifies a user name. This cmdlet operates on behalf of the user that this parameter specifies.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-OnBehalfOfUserRole

Specifies a user role. To obtain a user role, use the Get-SCUserRole cmdlet. This cmdlet operates on behalf of the user role that this parameter specifies.

Type:	UserRole
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-PeerIPAddresses

Type:	String[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-PFSGroup

Specifies a virtual private network (VPN) Perfect Forward Secrecy (PFS) group. Valid values are:

None
PFS1
PFS2
PFS2048
ECP256
ECP384
PFSMM
PFS24

Type:	VPNPFSGroup
Accepted values:	None, PFS1, PFS2, PFS2048, ECP256, ECP384, PFSMM, PFS24, PFS14
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-PROTipID

Specifies the ID of the Performance and Resource Optimization tip (PRO tip) that triggered this action. This parameter lets you audit PRO tips.

Type:	Guid
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoteTrafficSelectors

Type:	TrafficSelector[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveLocalTrafficSelectors

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveMaximumBandwidthInbound

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveMaximumBandwidthOutbound

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RemoveRemoteTrafficSelectors

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RunAsynchronously

Indicates that the job runs asynchronously so that control returns to the command shell immediately.

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Secret

Specifies a Run As account.

To obtain a Run As account, use the Get-SCRunAsAccount cmdlet.

Type:	RunAsAccount
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Status

Type:	GatewayConnectionStatus
Accepted values:	Error, Enabled, Disabled
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-TargetIPv4VPNAddress

Specifies a target VPN address in IPv4 format.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-TargetIPv6VPNAddress

Specifies a target VPN address in IPv6 format.

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-VMMServer

Specifies a VMM server object.

Type:	ServerConnection
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	True
Accept wildcard characters:	False

-VPNConnection

Specifies a virtual private network (VPN) connection object.

To obtain a VPN connection object, use the Get-SCVPNConnection cmdlet.

Type:	VPNConnection
Position:	0
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

Share via