Error Constants
A version of this page is also available for
4/8/2010
Error codes.
| Value | Description |
|---|---|
RIL_E_PHONEFAILURE |
Unspecified phone failure. |
RIL_E_NOCONNECTION |
The RIL has no connection to the phone. |
RIL_E_LINKRESERVED |
The RIL's link to the phone is reserved. |
RIL_E_OPNOTALLOWED |
Attempted operation is not allowed. |
RIL_E_OPNOTSUPPORTED |
Attempted operation is not supported. |
RIL_E_PHSIMPINREQUIRED |
PH-SIM personal identification number (PIN) is required to perform this operation. |
RIL_E_PHFSIMPINREQUIRED |
PH-FSIM PIN is required to perform this operation. |
RIL_E_PHFSIMPUKREQUIRED |
PH-FSIM PUK is required to perform this operation. |
RIL_E_SIMNOTINSERTED |
SIM is not inserted into the phone. |
RIL_E_SIMPINREQUIRED |
SIM PIN is required to perform this operation. |
RIL_E_SIMPUKREQUIRED |
SIM PUK is required to perform this operation. |
RIL_E_SIMFAILURE |
SIM failure was detected. |
RIL_E_SIMBUSY |
SIM is busy. |
RIL_E_SIMWRONG |
Incorrect SIM was inserted. |
RIL_E_INCORRECTPASSWORD |
Incorrect password was supplied. |
RIL_E_SIMPIN2REQUIRED |
SIM PIN2 is required to perform this operation. |
RIL_E_SIMPUK2REQUIRED |
SIM PUK2 is required to perform this operation. |
RIL_E_MEMORYFULL |
Storage memory is full. |
RIL_E_INVALIDINDEX |
Invalid storage index was supplied. |
RIL_E_NOTFOUND |
A requested storage entry was not found. |
RIL_E_MEMORYFAILURE |
Storage memory failure. |
RIL_E_TEXTSTRINGTOOLONG |
Supplied text string is too long. |
RIL_E_INVALIDTEXTSTRING |
Supplied text string contains invalid characters. |
RIL_E_DIALSTRINGTOOLONG |
Supplied dial string is too long. |
RIL_E_INVALIDDIALSTRING |
Supplied dial string contains invalid characters. |
RIL_E_NONETWORKSVC |
Network service is not available. |
RIL_E_NETWORKTIMEOUT |
Network operation timed out. |
RIL_E_EMERGENCYONLY |
Network can only be used for emergency calls. |
RIL_E_NETWKPINREQUIRED |
Network personalization PIN is required to perform this operation. |
RIL_E_NETWKPUKREQUIRED |
Network personalization PUK is required to perform this operation. |
RIL_E_SUBSETPINREQUIRED |
Network subset personalization PIN is required to perform this operation. |
RIL_E_SUBSETPUKREQUIRED |
Network subset personalization PUK is required to perform this operation. |
RIL_E_SVCPINREQUIRED |
Service provider personalization PIN is required to perform this operation. |
RIL_E_SVCPUKREQUIRED |
Service provider personalization PUK is required to perform this operation. |
RIL_E_CORPPINREQUIRED |
Corporate personalization PIN is required to perform this operation. |
RIL_E_CORPPUKREQUIRED |
Corporate personalization PUK is required to perform this operation. |
RIL_E_TELEMATICIWUNSUPPORTED |
Telematic interworking is not supported. |
RIL_E_SMTYPE0UNSUPPORTED |
Type 0 messages are not supported. |
RIL_E_CANTREPLACEMSG |
Existing message cannot be replaced. |
RIL_E_PROTOCOLIDERROR |
Unspecified error related to the message protocol ID. |
RIL_E_DCSUNSUPPORTED |
Specified message data coding scheme is not supported. |
RIL_E_MSGCLASSUNSUPPORTED |
Specified message class is not supported. |
RIL_E_DCSERROR |
Unspecified error related to the message data coding scheme. |
RIL_E_CMDCANTBEACTIONED |
Specified message command cannot be executed. |
RIL_E_CMDUNSUPPORTED |
Specified message command is not supported. |
RIL_E_CMDERROR |
Unspecified error related to the message command. |
RIL_E_MSGBODYHEADERERROR |
Unspecified error related to the message body or header. |
RIL_E_SCBUSY |
Message service center is busy. |
RIL_E_NOSCSUBSCRIPTION |
No message service center subscription. |
RIL_E_SCSYSTEMFAILURE |
Message service center system failure occurred. |
RIL_E_INVALIDADDRESS |
Specified address is invalid. |
RIL_E_DESTINATIONBARRED |
Message destination is barred. |
RIL_E_REJECTEDDUPLICATE |
Duplicate message was rejected. |
RIL_E_VPFUNSUPPORTED |
Specified message validity period format is not supported. |
RIL_E_VPUNSUPPORTED |
Specified message validity period is not supported. |
RIL_E_SIMMSGSTORAGEFULL |
Message storage on the SIM is full. |
RIL_E_NOSIMMSGSTORAGE |
SIM is not capable of storing messages. |
RIL_E_SIMTOOLKITBUSY |
SIM Application Toolkit is busy. |
RIL_E_SIMDOWNLOADERROR |
SIM data download error. |
RIL_E_MSGSVCRESERVED |
Messaging service is reserved. |
RIL_E_INVALIDMSGPARAM |
One of the message parameters is invalid. |
RIL_E_UNKNOWNSCADDRESS |
Unknown message service center address was specified. |
RIL_E_UNASSIGNEDNUMBER |
Specified message destination address is a currently unassigned phone number. |
RIL_E_MSGBARREDBYOPERATOR |
Message sending was barred by an operator. |
RIL_E_MSGCALLBARRED |
Message sending was prevented by outgoing call barring. |
RIL_E_MSGXFERREJECTED |
Sent message has been rejected by the receiving equipment. |
RIL_E_DESTINATIONOUTOFSVC |
Message could not be delivered because destination equipment is out of service. |
RIL_E_UNIDENTIFIEDSUBCRIBER |
Sender's mobile ID is not registered. |
RIL_E_SVCUNSUPPORTED |
Requested messaging service is not supported. |
RIL_E_UNKNOWNSUBSCRIBER |
Sender is not recognized by the network. |
RIL_E_NETWKOUTOFORDER |
Long-term network failure. |
RIL_E_NETWKTEMPFAILURE |
Short-term network failure. |
RIL_E_CONGESTION |
Operation failed because of the high network traffic. |
RIL_E_RESOURCESUNAVAILABLE |
Unspecified resources were not available. |
RIL_E_SVCNOTSUBSCRIBED |
Sender is not subscribed for the requested messaging service. |
RIL_E_SVCNOTIMPLEMENTED |
Requested messaging service is not implemented on the network. |
RIL_E_INVALIDMSGREFERENCE |
Invalid message reference value was used. |
RIL_E_INVALIDMSG |
Message was determined to be invalid for unspecified reasons. |
RIL_E_INVALIDMANDATORYINFO |
Mandatory message information is invalid or missing. |
RIL_E_MSGTYPEUNSUPPORTED |
The message type is unsupported. |
RIL_E_ICOMPATIBLEMSG |
Sent message is not compatible with the network. |
RIL_E_INFOELEMENTUNSUPPORTED |
An information element specified in the message is not supported. |
RIL_E_PROTOCOLERROR |
Unspecified protocol error. |
RIL_E_NETWORKERROR |
Unspecified network error. |
RIL_E_MESSAGINGERROR |
Unspecified messaging error. |
RIL_E_NOTREADY |
The RIL is not yet ready to perform the requested operation. |
RIL_E_TIMEDOUT |
Operation timed out. |
RIL_E_CANCELLED |
Operation was cancelled. |
RIL_E_NONOTIFYCALLBACK |
Requested operation requires a RIL notification callback, which was not provided. |
RIL_E_OPFMTUNAVAILABLE |
Operator format is not available. |
RIL_E_NORESPONSETODIAL |
Dial operation has not received a response for a long time. |
RIL_E_SECURITYFAILURE |
Security failure. |
RIL_E_RADIOFAILEDINIT |
Radio failed to initialize correctly. |
RIL_E_DRIVERINITFAILED |
There was a problem initializing the radio driver. |
RIL_E_RADIONOTPRESENT |
The radio is not present. |
RIL_E_RADIOOFF |
The radio is in Off mode. |
RIL_E_ILLEGALMS |
Illegal Mobile Station. Used with GPRS. |
RIL_E_ILLEGALME |
Illegal Mobile Equipment. Used with GPRS. |
RIL_E_GPRSSERVICENOTALLOWED |
GPRS Service not allowed |
RIL_E_PLMNNOTALLOWED |
PLMN not allowed. Used with GPRS. |
RIL_E_LOCATIONAREANOTALLOWED |
Location area not allowed. Used with GPRS. |
RIL_E_ROAMINGNOTALLOWEDINTHISLOCATIONAREA |
Roaming not allowed in this location area. |
RIL_E_SERVICEOPTIONNOTSUPPORTED |
Service option not supported. Used with GPRS. |
RIL_E_REQUESTEDSERVICEOPTIONNOTSUBSCRIBED |
Requested service option not subscribed. Used with GPRS. |
RIL_E_SERVICEOPTIONTEMPORARILYOUTOFORDER |
Service option temporarily out of order. Used with GPRS. |
RIL_E_PDPAUTHENTICATIONFAILURE |
PDP authentication failure. Used with GPRS. |
RIL_E_INVALIDMOBILECLASS |
Invalid mobile class. Used with GPRS. |
RIL_E_UNSPECIFIEDGPRSERROR |
Unspecific GPRS error. |
RIL_E_RADIOREBOOTED |
The command failed because the radio reset itself unexpectedly. |
RIL_E_INVALIDCONTEXTSTATE |
The command failed because the requested context state is invalid. Used by NDIS. |
RIL_E_MAXCONTEXTS |
The command failed because there are no more radio contexts. Used by NDIS. |
RIL_E_FDNRESTRICT |
Fixed Dialing Numbers (FDN) restriction. |
RIL_E_INVALIDASYNCCOMMANDRESPONSE |
The RIL driver has issued an invalid asynchronous command response. |
Requirements
| Header | ril.h |
| Windows Embedded CE | Windows Embedded CE 6.0 |