Enter-PSSession

Allows redirection of this connection to an alternate Uniform Resource Identifier (URI). By default, redirection is not allowed.

When you use the ConnectionURI parameter, the remote destination can return an instruction to redirect to a different URI. By default, Windows PowerShell does not redirect connections, but you can use this parameter to allow it to redirect the connection.

You can also limit the number of times the connection is redirected by changing the MaximumConnectionRedirectionCount session option value. Use the MaximumRedirection parameter of the New-PSSessionOption cmdlet or set the MaximumConnectionRedirectionCount property of the $PSSessionOption preference variable. The default value is 5.

Specifies the application name segment of the connection URI. Use this parameter to specify the application name when you are not using the ConnectionURI parameter in the command.

The default value is the value of the $PSSessionApplicationName preference variable on the local computer. If this preference variable is not defined, the default value is WSMAN. This value is appropriate for most uses. For more information, see about_Preference_Variables.

The WinRM service uses the application name to select a listener to service the connection request. The value of this parameter should match the value of the URLPrefix property of a listener on the remote computer.

Specifies the mechanism that is used to authenticate the user's credentials. The acceptable values for this parameter are:

• Default
• Basic
• Credssp
• Digest
• Kerberos
• Negotiate
• NegotiateWithImplicitCredential

The default value is Default.

CredSSP authentication is available only in Windows Vista, Windows Server 2008, and later versions of the Windows operating system.

For more information about the values of this parameter, see AuthenticationMechanism Enumeration in the MSDN library.

Caution: Credential Security Support Provider (CredSSP) authentication, in which the user's credentials are passed to a remote computer to be authenticated, is designed for commands that require authentication on more than one resource, such as accessing a remote network share. This mechanism increases the security risk of the remote operation. If the remote computer is compromised, the credentials that are passed to it can be used to control the network session.

Specifies the digital public key certificate (X509) of a user account that has permission to perform this action. Enter the certificate thumbprint of the certificate.

Certificates are used in client certificate-based authentication. They can be mapped only to local user accounts; they do not work with domain accounts.

To get a certificate, use the Get-Item or Get-ChildItem command in the Windows PowerShell Cert: drive.

Specifies a computer name. This cmdlet starts an interactive session with the specified remote computer. Enter only one computer name. The default is the local computer.

Type the NetBIOS name, the IP address, or the fully qualified domain name of the computer. You can also pipe a computer name to Enter-PSSession.

To use an IP address in the value of the ComputerName parameter, the command must include the Credential parameter. Also, the computer must be configured for HTTPS transport or the IP address of the remote computer must be included in the WinRM TrustedHosts list on the local computer. For instructions for adding a computer name to the TrustedHosts list, see "How to Add a Computer to the Trusted Host List" in about_Remote_Troubleshooting.

Note: In Windows Vista and later versions of the Windows operating system, to include the local computer in the value of the ComputerName parameter, you must start Windows PowerShell with the Run as administrator option.

Specifies the session configuration that is used for the interactive session.

Enter a configuration name or the fully qualified resource URI for a session configuration. If you specify only the configuration name, the following schema URI is prepended: https://schemas.microsoft.com/powershell.

The session configuration for a session is located on the remote computer. If the specified session configuration does not exist on the remote computer, the command fails.

The default value is the value of the $PSSessionConfigurationName preference variable on the local computer. If this preference variable is not set, the default is Microsoft.PowerShell. For more information, see about_Preference_Variables.

Specifies a URI that defines the connection endpoint for the session. The URI must be fully qualified. The format of this string is as follows:

<Transport>://<ComputerName>:<Port>/<ApplicationName>

The default value is as follows:

https://localhost:5985/WSMAN

If you do not specify a ConnectionURI, you can use the UseSSL, ComputerName, Port, and ApplicationName parameters to specify the ConnectionURI values.

Valid values for the Transport segment of the URI are HTTP and HTTPS. If you specify a connection URI with a Transport segment, but do not specify a port, the session is created by using standards ports: 80 for HTTP and 443 for HTTPS. To use the default ports for Windows PowerShell remoting, specify port 5985 for HTTP or 5986 for HTTPS.

If the destination computer redirects the connection to a different URI, Windows PowerShell prevents the redirection unless you use the AllowRedirection parameter in the command.

Specifies a user account that has permission to perform this action. The default is the current user.

Type a user name, such as User01, Domain01\User01, or User@Domain.com, or enter a PSCredential object, such as one returned by the Get-Credential cmdlet.

When you type a user name, this cmdlet prompts you for a password.

Indicates that this cmdlet adds an interactive security token to loopback sessions. The interactive token lets you run commands in the loopback session that get data from other computers. For example, you can run a command in the session that copies XML files from a remote computer to the local computer.

A loopback session is a PSSession that originates and ends on the same computer. To create a loopback session, omit the ComputerName parameter or set its value to . (dot), localhost, or the name of the local computer.

By default, loopback sessions are created by using a network token, which might not provide sufficient permission to authenticate to remote computers.

The EnableNetworkAccess parameter is effective only in loopback sessions. If you use EnableNetworkAccess when you create a session on a remote computer, the command succeeds, but the parameter is ignored.

You can also allow remote access in a loopback session by using the CredSSP value of the Authentication parameter, which delegates the session credentials to other computers.

This parameter was introduced in Windows PowerShell 3.0.

Specifies the ID of an existing session. Enter-PSSession uses the specified session for the interactive session.

To find the ID of a session, use the Get-PSSession cmdlet.

Specifies the instance ID of an existing session. Enter-PSSession uses the specified session for the interactive session.

The instance ID is a GUID. To find the instance ID of a session, use the Get-PSSession cmdlet. You can also use the Session, Name, or ID parameters to specify an existing session. Or, you can use the ComputerName parameter to start a temporary session.

Specifies the friendly name of an existing session. Enter-PSSession uses the specified session for the interactive session.

If the name that you specify matches more than one session, the command fails. You can also use the Session, InstanceID, or ID parameters to specify an existing session. Or, you can use the ComputerName parameter to start a temporary session.

To establish a friendly name for a session, use the Name parameter of the New-PSSession cmdlet.

Specifies the network port on the remote computer that is used for this command. To connect to a remote computer, the remote computer must be listening on the port that the connection uses. The default ports are 5985, which is the WinRM port for HTTP, and 5986, which is the WinRM port for HTTPS.

Before using an alternate port, you must configure the WinRM listener on the remote computer to listen at that port. Use the following commands to configure the listener:

1. winrm delete winrm/config/listener?Address=*+Transport=HTTP

2. winrm create winrm/config/listener?Address=*+Transport=HTTP @{Port="\<port-number\>"}

Do not use the Port parameter unless you must. The port setting in the command applies to all computers or sessions on which the command runs. An alternate port setting might prevent the command from running on all computers.

Specifies a Windows PowerShell session (PSSession) to use for the interactive session. This parameter takes a session object. You can also use the Name, InstanceID, or ID parameters to specify a PSSession.

Enter a variable that contains a session object or a command that creates or gets a session object, such as a New-PSSession or Get-PSSession command. You can also pipe a session object to Enter-PSSession. You can submit only one PSSession by using this parameter. If you enter a variable that contains more than one PSSession, the command fails.

When you use Exit-PSSession or the EXIT keyword, the interactive session ends, but the PSSession that you created remains open and available for use.

Sets advanced options for the session. Enter a SessionOption object, such as one that you create by using the New-PSSessionOption cmdlet, or a hash table in which the keys are session option names and the values are session option values.

The default values for the options are determined by the value of the $PSSessionOption preference variable, if it is set. Otherwise, the default values are established by options set in the session configuration.

The session option values take precedence over default values for sessions set in the $PSSessionOption preference variable and in the session configuration. However, they do not take precedence over maximum values, quotas or limits set in the session configuration.

For a description of the session options, including the default values, see New-PSSessionOption. For information about the $PSSessionOption preference variable, see about_Preference_Variables. For more information about session configurations, see about_Session_Configurations.

Indicates that this cmdlet uses the Secure Sockets Layer (SSL) protocol to establish a connection to the remote computer. By default, SSL is not used.

WS-Management encrypts all Windows PowerShell content transmitted over the network. The UseSSL parameter is an additional protection that sends the data across an HTTPS connection instead of an HTTP connection.

If you use this parameter, but SSL is not available on the port that is used for the command, the command fails.

Specifies the ID of a virtual machine.

Specifies the name of a virtual machine.