Tuning Network Monitoring
Updated: May 13, 2016
Applies To: System Center 2012 R2 Operations Manager, System Center 2012 - Operations Manager, System Center 2012 SP1 - Operations Manager
System Center 2012 – Operations Manager includes the following management packs specific to network device discovery and monitoring:
Network Management - Core Monitoring
This management pack contains monitoring logic for network devices.
Windows Client Network Discovery
This management pack contains discovery rules to set the properties of discovered network adapters connected to computers running client operating systems.
Windows Server Network Discovery
This management pack contains discovery rules to set the properties of discovered network adapters connected to computers running server operating systems.
Network Discovery Internal
This management pack contains definitions and rules for discovering network devices.
Network Management Library
This management pack contains definitions for core network device management.
Network Management Reports
This management pack contains reports for network management.
Network Management Templates
This management pack contains templates for authoring network management workflows.
Tuning Network Rules
The following rules are disabled by default. Using overrides, enable these rules only for the specific device types in your environment. To view these rules grouped by type, in the Administration workspace, scope Management Pack Objects to the network monitoring management packs listed in the previous section, and then click Rules.
Rule |
Description |
Types |
---|---|---|
Internal Network Management Discovery Trap Rediscovery |
Internal rule to initiate rediscovery via trap requests |
|
Output Packet Error Percentage |
Collects the percentage of output packet errors |
|
Input Broadcast Packets Percentage |
Collects the percentage of input broadcast packets. |
|
Input Packet Error Percentage |
Collects the percentage of input packet errors |
|
Collision Percentage |
Collects the rate of Ethernet packet collisions |
|
Outbound Multicast Packets per Second |
Collects outbound multicast packets per second |
|
Inbound Unicast Packets per Second |
Collects inbound unicast packets per second |
|
Outbound Broadcast Packets per Second |
Collects outbound broadcast packets per second |
|
Outbound Unicast Packets per Second |
Collects outbound unicast packets per second |
|
Input Packet Discard Rate |
Collects the percentage of discarded input packets |
|
Outbound Bits per Second |
Collects outbound bits per second |
|
Inbound Broadcast Packets per Second |
Collects inbound broadcast packets per second |
|
Inbound Bits per Second |
Collects inbound bits per second |
|
Inbound Multicast Packets per Second |
Collects inbound multicast packets per second |
|
Interface Utilization |
Collects the utilization of the interface |
|
Output Packet Discard Rate |
Collects the percentage of discarded output packets |
|
Inbound Queue Packets Dropped Per Second |
Collects the number of packets dropped per second due to the input queue being full. |
Interface (Cisco Router) |
Inbound Giant Packets per Second |
Collects giant inbound packets per second. |
Interface (Cisco Router) |
Inbound Packets with CRC Error per Second |
Collects the number of inbound packets per second with CRC errors. |
Interface (Cisco Router) |
Inbound Packets Aborted per Second |
Collects the number of inbound packets aborted per second. |
Interface (Cisco Router) |
Inbound Misaligned Packets per Second |
Collects the number of inbound misaligned packets per second. |
Interface (Cisco Router) |
Output Queue Packets Dropped per Second |
Collects the number of packets dropped per second due to the output queue being full. |
Interface (Cisco Router) |
Inbound Runts per Second |
Collects the number of inbound packets smaller than permitted by the physical media. |
Interface (Cisco Router) |
Inbound Packets Ignored per Second |
Collects inbound packets ignored per second. |
Interface (Cisco Router) |
Output Packet Queue Drop Percentage |
Collects the number of output packets discarded because of output queue overflow. |
|
Input Packet Queue Drop Percentage |
Collects the number of input packets discarded because of input queue overflow. |
|
Outbound Non-Unicast Packets per Second |
Collects outbound non-unicast packets per second. |
|
Inbound Non-Unicast Packets per Second |
Collects inbound non-unicast packets per second. |
|
Port Alignment Errors Rate |
Determines the change in the SNMP dot3StatsAlignmentErrorsRate value for the dot3_Ethernet_Performance_Port since the last polling. |
Port (Dot3 ethernet) |
Port Carrier Sense Errors Rate |
Determines the change in the SNMP dot3StatsCarrierSenseErrorsRate value for the dot3_Ethernet_Performance_Port since the last polling. |
Port (Dot3 ethernet) |
Port FCS Errors Rate |
Determines the change in the SNMP dot3StatsFCSErrorsRate value for the dot3_Ethernet_Performance_Port since the last polling. |
Port (Dot3 ethernet) |
Port Frame Too Longs Rate |
Determines the change in the SNMP dot3StatsFrameTooLongsRate value for the dot3_Ethernet_Performance_Port since the last polling. |
Port (Dot3 ethernet) |
Port Internal Mac Receive Errors Rate |
Determines the change in the SNMP dot3StatsInternalMacReceiveErrorsRate value for the dot3_Ethernet_Performance_Port since the last polling. |
Port (Dot3 ethernet) |
Port Internal Mac Transmit Errors Rate |
Determines the change in the SNMP dot3StatsInternalMacTransmitErrorsRate value for the dot3_Ethernet_Performance_Port since the last polling. |
Port (Dot3 ethernet) |
Tuning Alerts for Network Monitoring
The following monitors that generate alerts are disabled by default. Using overrides, enable these monitors if you want to receive alerts for the issue.
Monitor |
Description |
Targets |
---|---|---|
Interface Is Flapping |
Monitors whether the interface link is switching frequently between up and down based on SNMP traps received. |
|
Interface Status |
Aggregate monitor that rolls up interface health states for Operational Status and Administrative Status monitors. |
|
High Discard Percentage |
Aggregate monitor that rolls up discard percentage health monitors. |
|
High Error Percentage |
Aggregate monitor that rolls up error percentage health monitors. |
|
High Queue Drop Percentage |
Aggregate monitor that rolls up queue drop percentage health monitors |
|
ICMP (Ping) Monitor |
Monitors the response of network devices to ping. |
ICMP IP |
ICMPv6 (Ping) Monitor |
Monitors the response of network devices to an IPv6 ping. |
ICMPv6 IPv6 |
Collision Rate (Dot3 Ethernet) |
Monitors the packet collision rate on this device |
|
High Input Broadcast Rate (if MIB Dot3 Ethernet Port) |
Monitors the level of input broadcast packets on this device |
|
See Also
Monitoring Networks by Using Operations Manager
How to Discover Network Devices in Operations Manager
Network Device Discovery Settings
Run As Accounts for Network Monitoring in Operations Manager
How to Delete or Restore a Network Device in Operations Manager
Viewing Network Devices and Data in Operations Manager
Security for Servers Performing Network Discovery
Network Devices Supported for Discovery by Operations Manager
Reports for Network Monitoring in Operations Manager