Try...Catch...Finally Statement (Visual Basic)

Provides a way to handle some or all possible errors that may occur in a given block of code, while still running code.

Try
    [ tryStatements ]
    [ Exit Try ]
[ Catch [ exception [ As type ] ] [ When expression ]
    [ catchStatements ]
    [ Exit Try ] ]
[ Catch ... ]
[ Finally
    [ finallyStatements ] ]
End Try

Parts

Remarks

If you expect that a particular exception might occur during a particular section of code, put the code in a Try block and use a Catch block to retain control and handle the exception if it occurs.

A Try…Catch statement consists of a Try block followed by one or more Catch clauses, which specify handlers for various exceptions. When an exception is thrown in a Try block, Visual Basic looks for the Catch statement that handles the exception. If a matching Catch statement is not found, Visual Basic examines the method that called the current method, and so on up the call stack. If no Catch block is found, Visual Basic displays an unhandled exception message to the user and stops execution of the program.

You can use more than one Catch statement in a Try…Catch statement. If you do this, the order of the Catch clauses is significant because they are examined in order. Catch the more specific exceptions before the less specific ones.

The following Catch statement conditions are the least specific, and will catch all exceptions that derive from the Exception class. You should ordinarily use one of these variations as the last Catch block in the Try...Catch...Finally structure, after catching all the specific exceptions you expect. Control flow can never reach a Catch block that follows either of these variations.

• The type is Exception, for example: Catch ex As Exception

• The statement has no exception variable, for example: Catch

When a Try…Catch…Finally statement is nested in another Try block, Visual Basic first examines each Catch statement in the innermost Try block. If no matching Catch statement is found, the search proceeds to the Catch statements of the outer Try…Catch…Finally block.

Local variables from a Try block are not available in a Catch block because they are separate blocks. If you want to use a variable in more than one block, declare the variable outside the Try...Catch...Finally structure.

Finally Block

If you have one or more statements that must run before you exit the Try structure, use a Finally block. Control passes to the Finally block just before it passes out of the Try…Catch structure. This is true even if an exception occurs anywhere inside the Try structure.

A Finally block is useful for running any code that must execute even if there is an exception. Control is passed to the Finally block regardless of how the Try...Catch block exits.

The code in a Finally block runs even if your code encounters a Return statement in a Try or Catch block. Control does not pass from a Try or Catch block to the corresponding Finally block in the following cases:

• An End Statement is encountered in the Try or Catch block.

• A StackOverflowException is thrown in the Try or Catch block.

It is not valid to explicitly transfer execution into a Finally block. Transferring execution out of a Finally block is not valid, except through an exception.

If a Try statement does not contain at least one Catch block, it must contain a Finally block.

Exception Argument

The Catch block exception argument is an instance of the Exception class or a class that derives from the Exception class. The Exception class instance corresponds to the error that occurred in the Try block.

The properties of the Exception object help to identify the cause and location of an exception. For example, the StackTrace property lists the called methods that led to the exception, helping you find where the error occurred in the code. Message returns a message that describes the exception. HelpLink returns a link to an associated Help file. InnerException returns the Exception object that caused the current exception, or it returns Nothing if there is no original Exception.

Considerations When Using a Try…Catch Statement

Use a Try…Catch statement only to signal the occurrence of unusual or unanticipated program events. Reasons for this include the following:

• Catching exceptions at runtime creates additional overhead, and is likely to be slower than pre-checking to avoid exceptions.

• If a Catch block is not handled correctly, the exception might not be reported correctly to users.

• Exception handling makes a program more complex.

You do not always need a Try…Catch statement to check for a condition that is likely to occur. The following example checks whether a file exists before trying to open it. This reduces the need for catching an exception thrown by the OpenText method.

Private Sub TextFileExample(ByVal filePath As String)

    ' Verify that the file exists. 
    If System.IO.File.Exists(filePath) = False Then
        Console.Write("File Not Found: " & filePath)
    Else 
        ' Open the text file and display its contents. 
        Dim sr As System.IO.StreamReader =
            System.IO.File.OpenText(filePath)

        Console.Write(sr.ReadToEnd)

        sr.Close()
    End If 
End Sub

Ensure that code in Catch blocks can properly report exceptions to users, whether through thread-safe logging or appropriate messages. Otherwise, exceptions might remain unknown.

Async Methods

If you mark a method with the Async modifier, you can use the Await operator in the method. A statement with the Await operator suspends execution of the method until the awaited task completes. The task represents ongoing work. When the task that's associated with the Await operator finishes, execution resumes in the same method. For more information, see Control Flow in Async Programs (C# and Visual Basic).

A task returned by an Async method may end in a faulted state, indicating that it completed due to an unhandled exception. A task may also end in a canceled state, which results in an OperationCanceledException being thrown out of the await expression. To catch either type of exception, place the Await expression that's associated with the task in a Try block, and catch the exception in the Catch block. An example is provided later in this topic.

A task can be in a faulted state because multiple exceptions were responsible for its faulting. For example, the task might be the result of a call to TaskWhenAll. When you await such a task, the caught exception is only one of the exceptions, and you can't predict which exception will be caught. An example is provided later in this topic.

An Await expression can't be inside a Catch block or Finally block.

Iterators

An iterator function or Get accessor performs a custom iteration over a collection. An iterator uses a Yield statement to return each element of the collection one at a time. You call an iterator function by using a For Each...Next Statement (Visual Basic).

A Yield statement can be inside a Try block. A Try block that contains a Yield statement can have Catch blocks, and can have a Finally block. See the "Try Blocks in Visual Basic" section of Iterators (C# and Visual Basic) for an example.

A Yield statement cannot be inside a Catch block or a Finally block.

If the For Each body (outside of the iterator function) throws an exception, a Catch block in the iterator function is not executed, but a Finally block in the iterator function is executed. A Catch block inside an iterator function catches only exceptions that occur inside the iterator function.

Partial-Trust Situations

In partial-trust situations, such as an application hosted on a network share, Try...Catch...Finally does not catch security exceptions that occur before the method that contains the call is invoked. The following example, when you put it on a server share and run from there, produces the error "System.Security.SecurityException: Request Failed." For more information about security exceptions, see the SecurityException class.

Try
    Process.Start("https://www.microsoft.com")
Catch ex As Exception
    MsgBox("Can't load Web page" & vbCrLf & ex.Message)
End Try

In such a partial-trust situation, you have to put the Process.Start statement in a separate Sub. The initial call to the Sub will fail. This enables Try...Catch to catch it before the Sub that contains Process.Start is started and the security exception produced.

Example

The following example illustrates the structure of the Try...Catch...Finally statement.

Public Sub TryExample()
    ' Declare variables. 
    Dim x As Integer = 5
    Dim y As Integer = 0

    ' Set up structured error handling. 
    Try 
        ' Cause a "Divide by Zero" exception.
        x = x \ y

        ' This statement does not execute because program 
        ' control passes to the Catch block when the 
        ' exception occurs.
        MessageBox.Show("end of Try block")
    Catch ex As Exception
        ' Show the exception's message.
        MessageBox.Show(ex.Message)

        ' Show the stack trace, which is a list of methods 
        ' that are currently executing.
        MessageBox.Show("Stack Trace: " & vbCrLf & ex.StackTrace)
    Finally 
        ' This line executes whether or not the exception occurs.
        MessageBox.Show("in Finally block")
    End Try 
End Sub

In the following example, the CreateException method throws a NullReferenceException. The code that generates the exception is not in a Try block. Therefore, the CreateException method does not handle the exception. The RunSample method does handle the exception because the call to the CreateException method is in a Try block.

The example includes Catch statements for several types of exceptions, ordered from the most specific to the most general.

Public Sub RunSample()
    Try
        CreateException()
    Catch ex As System.IO.IOException
        ' Code that reacts to IOException. 
    Catch ex As NullReferenceException
        MessageBox.Show("NullReferenceException: " & ex.Message)
        MessageBox.Show("Stack Trace: " & vbCrLf & ex.StackTrace)
    Catch ex As Exception
        ' Code that reacts to any other exception. 
    End Try 
End Sub 

Private Sub CreateException()
    ' This code throws a NullReferenceException. 
    Dim obj = Nothing 
    Dim prop = obj.Name

    ' This code also throws a NullReferenceException. 
    'Throw New NullReferenceException("Something happened.") 
End Sub

The following example shows how to use a Catch When statement to filter on a conditional expression. If the conditional expression evaluates to True, the code in the Catch block runs.

Private Sub WhenExample()
    Dim i As Integer = 5

    Try 
        Throw New ArgumentException()
    Catch e As OverflowException When i = 5
        Console.WriteLine("First handler")
    Catch e As ArgumentException When i = 4
        Console.WriteLine("Second handler")
    Catch When i = 5
        Console.WriteLine("Third handler")
    End Try 
End Sub 
' Output: Third handler

The following example has a Try…Catch statement that is contained in a Try block. The inner Catch block throws an exception that has its InnerException property set to the original exception. The outer Catch block reports its own exception and the inner exception.

Private Sub InnerExceptionExample()
    Try 
        Try 
            ' Set a reference to a StringBuilder. 
            ' The exception below does not occur if the commented 
            ' out statement is used instead. 
            Dim sb As System.Text.StringBuilder
            'Dim sb As New System.Text.StringBuilder 

            ' Cause a NullReferenceException.
            sb.Append("text")
        Catch ex As Exception
            ' Throw a new exception that has the inner exception 
            ' set to the original exception. 
            Throw New ApplicationException("Something happened :(", ex)
        End Try 
    Catch ex2 As Exception
        ' Show the exception.
        Console.WriteLine("Exception: " & ex2.Message)
        Console.WriteLine(ex2.StackTrace)

        ' Show the inner exception, if one is present. 
        If ex2.InnerException IsNot Nothing Then
            Console.WriteLine("Inner Exception: " & ex2.InnerException.Message)
            Console.WriteLine(ex2.StackTrace)
        End If 
    End Try 
End Sub

The following example illustrates exception handling for async methods. To catch an exception that applies to an async task, the Await expression is in a Try block of the caller, and the exception is caught in the Catch block.

Uncomment the Throw New Exception line in the example to demonstrate exception handling. The exception is caught in the Catch block, the task's IsFaulted property is set to True, and the task's Exception.InnerException property is set to the exception.

Uncomment the Throw New OperationCancelledException line to demonstrate what happens when you cancel an asynchronous process. The exception is caught in the Catch block, and the task's IsCanceled property is set to True. However, under some conditions that don't apply to this example, IsFaulted is set to True and IsCanceled is set to False.

Public Async Function DoSomethingAsync() As Task
    Dim theTask As Task(Of String) = DelayAsync()

    Try 
        Dim result As String = Await theTask
        Debug.WriteLine("Result: " & result)
    Catch ex As Exception
        Debug.WriteLine("Exception Message: " & ex.Message)
    End Try

    Debug.WriteLine("Task IsCanceled: " & theTask.IsCanceled)
    Debug.WriteLine("Task IsFaulted:  " & theTask.IsFaulted)
    If theTask.Exception IsNot Nothing Then
        Debug.WriteLine("Task Exception Message: " &
            theTask.Exception.Message)
        Debug.WriteLine("Task Inner Exception Message: " &
            theTask.Exception.InnerException.Message)
    End If 
End Function 

Private Async Function DelayAsync() As Task(Of String)
    Await Task.Delay(100)

    ' Uncomment each of the following lines to 
    ' demonstrate exception handling. 

    'Throw New OperationCanceledException("canceled") 
    'Throw New Exception("Something happened.") 
    Return "Done" 
End Function 


' Output when no exception is thrown in the awaited method: 
'   Result: Done 
'   Task IsCanceled: False 
'   Task IsFaulted:  False 

' Output when an Exception is thrown in the awaited method: 
'   Exception Message: Something happened. 
'   Task IsCanceled: False 
'   Task IsFaulted:  True 
'   Task Exception Message: One or more errors occurred. 
'   Task Inner Exception Message: Something happened. 

' Output when an OperationCanceledException or TaskCanceledException 
' is thrown in the awaited method: 
'   Exception Message: canceled 
'   Task IsCanceled: True 
'   Task IsFaulted:  False

The following example illustrates exception handling where multiple tasks can result in multiple exceptions. The Try block has the Await expression for the task that TaskWhenAll returned. The task is complete when the three tasks to which TaskWhenAll is applied are complete.

Each of the three tasks causes an exception. The Catch block iterates through the exceptions, which are found in the Exception.InnerExceptions property of the task that Task.WhenAll returned.

Public Async Function DoMultipleAsync() As Task
    Dim theTask1 As Task = ExcAsync(info:="First Task")
    Dim theTask2 As Task = ExcAsync(info:="Second Task")
    Dim theTask3 As Task = ExcAsync(info:="Third Task")

    Dim allTasks As Task = Task.WhenAll(theTask1, theTask2, theTask3)

    Try
        Await allTasks
    Catch ex As Exception
        Debug.WriteLine("Exception: " & ex.Message)
        Debug.WriteLine("Task IsFaulted: " & allTasks.IsFaulted)
        For Each inEx In allTasks.Exception.InnerExceptions
            Debug.WriteLine("Task Inner Exception: " + inEx.Message)
        Next 
    End Try 
End Function 

Private Async Function ExcAsync(info As String) As Task
    Await Task.Delay(100)

    Throw New Exception("Error-" & info)
End Function 

' Output: 
'   Exception: Error-First Task 
'   Task IsFaulted: True 
'   Task Inner Exception: Error-First Task 
'   Task Inner Exception: Error-Second Task 
'   Task Inner Exception: Error-Third Task

See Also

Reference

Err

Exit Statement (Visual Basic)

On Error Statement (Visual Basic)

Exception

Throw Statement (Visual Basic)

Concepts

Best Practices for Using Code Snippets

Exception Handling (Task Parallel Library)