Share via

DSFXI3DL2Reverb Structure

  • Article

[The feature associated with this page, DirectSound, is a legacy feature. It has been superseded by WASAPI and Audio Graphs. Media Casting have been optimized for Windows 10 and Windows 11. Microsoft strongly recommends that new code use Media Casting instead of DirectSound, when possible. Microsoft suggests that existing code that uses the legacy APIs be rewritten to use the new APIs if possible.]

The DSFXI3DL2Reverb structure contains parameters for an I3DL2 (Interactive 3D Audio Level 2) reverberation effect.

Syntax

typedef struct DSFXI3DL2Reverb {
    LONG lRoom;
    LONG lRoomHF;
    FLOAT flRoomRolloffFactor;
    FLOAT flDecayTime;
    FLOAT flDecayHFRatio;
    LONG lReflections;
    FLOAT flReflectionsDelay;
    LONG lReverb;
    FLOAT flReverbDelay;
    FLOAT flDiffusion;
    FLOAT flDensity;
    FLOAT flHFReference;
} DSFXI3DL2Reverb;

Members

  • lRoom
    Attenuation of the room effect, in millibels (mB), in the range from DSFX_I3DL2REVERB_ROOM_MIN to DSFX_I3DL2REVERB_ROOM_MAX. The default value is DSFX_I3DL2REVERB_ROOM_DEFAULT, or -1000 mB.
  • lRoomHF
    Attenuation of the room high-frequency effect, in mB, in the range from DSFX_I3DL2REVERB_ROOMHF_MIN to DSFX_I3DL2REVERB_ROOMHF_MAX. The default value is DSFX_I3DL2REVERB_ROOMHF_DEFAULT, or -100 mB.
  • flRoomRolloffFactor
    Rolloff factor for the reflected signals, in the range from DSFX_I3DL2REVERB_ROOMROLLOFFFACTOR_MIN to DSFX_I3DL2REVERB_ROOMROLLOFFFACTOR_MAX. The default value is DSFX_I3DL2REVERB_ROOMROLLOFFFACTOR_DEFAULT, or 0.0. The rolloff factor for the direct path is controlled by the DirectSound listener.
  • flDecayTime
    Decay time, in seconds, in the range from DSFX_I3DL2REVERB_DECAYTIME_MIN to DSFX_I3DL2REVERB_DECAYTIME_MAX. The default value is DSFX_I3DL2REVERB_DECAYTIME_DEFAULT, or 1.49 second.
  • flDecayHFRatio
    Ratio of the decay time at high frequencies to the decay time at low frequencies, in the range from DSFX_I3DL2REVERB_DECAYHFRATIO_MIN to DSFX_I3DL2REVERB_DECAYHFRATIO_MAX. The default value is DSFX_I3DL2REVERB_DECAYHFRATIO_DEFAULT, or 0.83.
  • lReflections
    Attenuation of early reflections relative to lRoom, in mB, in the range from DSFX_I3DL2REVERB_REFLECTIONS_MIN to DSFX_I3DL2REVERB_REFLECTIONS_MAX. The default value is DSFX_I3DL2REVERB_REFLECTIONS_DEFAULT, or -2602 mB.
  • flReflectionsDelay
    Delay time of the first reflection relative to the direct path, in seconds, in the range from DSFX_I3DL2REVERB_REFLECTIONSDELAY_MIN to DSFX_I3DL2REVERB_REFLECTIONSDELAY_DEFAULT. The default value is 0.007 seconds.
  • lReverb
    Attenuation of late reverberation relative to lRoom, in mB, in the range -from DSFX_I3DL2REVERB_REVERB_MIN to DSFX_I3DL2REVERB_REVERB_MAX. The default value is DSFX_I3DL2REVERB_REVERB_DEFAULT, or 200 mB.
  • flReverbDelay
    Time limit between the early reflections and the late reverberation relative to the time of the first reflection, in seconds, in the range from DSFX_I3DL2REVERB_REVERBDELAY_MIN to DSFX_I3DL2REVERB_REVERBDELAY_MAX. The default value is DSFX_I3DL2REVERB_REVERBDELAY_DEFAULT, or 0.011 seconds.
  • flDiffusion
    Echo density in the late reverberation decay, in percent, in the range from DSFX_I3DL2REVERB_DIFFUSION_MIN to DSFX_I3DL2REVERB_DIFFUSION_MAX. The default value is DSFX_I3DL2REVERB_DIFFUSION_DEFAULT, or 100.0 percent.
  • flDensity
    Modal density in the late reverberation decay, in percent, in the range from DSFX_I3DL2REVERB_DENSITY_MIN to DSFX_I3DL2REVERB_DENSITY_MAX. The default value is DSFX_I3DL2REVERB_DENSITY_DEFAULT, or 100.0 percent.
  • flHFReference
    Reference high frequency, in hertz, in the range from DSFX_I3DL2REVERB_HFREFERENCE_MIN to DSFX_I3DL2REVERB_HFREFERENCE_MAX. The default value is DSFX_I3DL2REVERB_HFREFERENCE_DEFAULT, or 5000.0 Hz.

Requirements

Header: Declared in DSound.h.

See Also

IDirectSoundFXI3DL2Reverb8