How to Use the BSP for the NEC Solution Gear 2-Vr5500 Development Kit (Windows Embedded CE 6.0)
1/5/2010
You can use the sample board support package (BSP) provided by Windows Embedded CE 6.0 for the NEC Solution Gear 2-Vr5500 Development Kit to quickly evaluate the Windows Embedded CE operating system (OS) features.
For more information about the sample BSPs included in Platform Builder for MIPS microprocessors, see MIPS BSPs.
Hardware and Software Assumptions
- You included support for MIPSII, MIPSII_FP, MIPSIV, and MIPSIV_FP microprocessors when you installed Platform Builder. If you did not, reinstall Platform Builder and include MIPSII, MIPSII_FP, MIPSIV, and MIPSIV_FP microprocessor support.
- You are downloading a Windows Embedded CE run-time image to an NEC Solution Gear 2-Vr5500 Development Kit.
To use the BSP for the NEC Solution Gear 2-Vr5500 Development Kit, follow the steps in the table below.
| Step | Topic |
|---|---|
1. From the Windows Embedded CE 6.0 OS Design Wizard, select the NEC DDB-Vr5500A: MIPSII, MIPSII_FP, MIPSIV, or MIPSIV_FP BSP. If you are unsure which configuration to use, select the MIPSIV_FP BSP, the PDA Device design template, and the Enterprise Web Pad variant. Accept the defaults for the other pages of the wizards. |
Creating an OS Design with the Windows Embedded CE OS Design Wizard |
2. Review the supported hardware and software features on the SDB and familiarize yourself with limitations that can affect your run-time image on the SDB. An SDB is a hardware development system with which you can develop and test your OS design using a wide range of processors and peripherals. For more information, see Standard Development Board Design. |
NEC Solution Gear 2-Vr5500 Development Kit Supported Features |
3. Set up the SDB. |
Setting up the NEC Solution Gear 2-Vr5500 Development Kit Hardware |
4. Modify the switch and jumper settings on the SDB. |
Modifying the NEC Solution Gear 2-Vr5500 Development Kit Switches and Jumpers |
5. Configure the Microsoft HyperTerminal application to receive debug messages. |
|
6. Build the run-time image. You must build the run-time image before you can download it to the SDB. |
|
7. Download the Ethernet boot loader to ROM or flash the SDB. |
Downloading the Boot Loader to the NEC Solution Gear 2-Vr5500 Development Kit |
8. Download the run-time image to the SDB. |
Downloading the Run-Time Image to the NEC Solution Gear 2-Vr5500 Development Kit |