IeXdi2Mem::FillMemoryX (Windows Embedded CE 6.0)

1/5/2010

This method fills the memory with a specified sequence of bytes.

Syntax

HRESULT FillMemoryX(
  [in] DWORD dwCpuNum,
  [in] LINEAR_MEM_MAP_TYPE lmt,
  [in] ADDRESS_TYPE AddressRangeStart,
  [in] ADDRESS_TYPE AddressRangeEnd,
  [in] DWORD dwNbElem,
  [in] BYTE bAccessWidthInBytes,
  [in, size_is(dwNbElem* bAccessWidthInBytes)] BYTE* pbSequenceToFill
);

Parameters

• dwCpuNum
  CPU number.

  This parameter should be 0 if this is not a symmetric multi-processor (SMP). Otherwise, assign dwCpuNum a value between 0 and n-1, where n is the CPU number in the SMP system.

• lmt
  Linear memory map type.

  The following memory map types are used by convention:

  Value	Description
  LMM_VIRT, 0	Virtual memory
  LMM_PHYS, 1	Physical memory
  LMM_IO, 2	Peripheral I/O
  3 and higher	Free for custom use

• AddressRangeStart
  Starting address of the memory block to be filled on the target device.

• AddressRangeEnd
  Ending address of the memory block to be filled on the target device.

• dwNbElem
  Number of elements of bAccessWidthInBytes to be filled.

• bAccessWidthInBytes
  Data width in bytes, where byte=1, word=2, dword=4, and so on.

• pbSequenceToFill
  Buffer that contains the sequence to fill.

  pbSequenceToFill must be large enough to hold dwNbElem elements.

  Note

  The server should handle sequence buffers of at least 1 KB.

Return Value

The following table shows return values for this method.

Remarks

The memory content provided to this function should be sanitized to remove artifacts of software breakpoints or other memory modifications produced by debugging activity in the driver, probe, or target device.

Requirements

See Also

Reference

IeXdi2Mem
IeXDI2 Interfaces