PCMCIA Legacy Compatibility Layer Architecture (Windows Embedded CE 6.0)
1/6/2010
The legacy PCMCIA legacy compatibility layer allows any legacy PCMCIA client drivers to run on the Windows CE 5.0 host stack.
Note
A legacy PCMCIA client driver is one that was created prior to Windows CE 5.0 that supports only 16-bit PCMCIA cards. A PC Card driver is one that was created in Windows CE 5.0 that supports both 16 and 32-bit PCMCIA cards and was written using the bus-agnostic driver model. For more information, see PC Card Bus-Agnostic Client Drivers.
The upper layer of this driver exposes a number of functions that you can use to write stream interface drivers for individual legacy PCMCIA cards. These functions constitute the PCMCIA card services library. The lower layer exposes a set of lower-level functions that the upper layer uses. These functions constitute the PCMCIA socket services library.
The following table shows the device interface functions for the PCMCIA legacy compatibility layer.
| Function | Description |
|---|---|
Reads or writes the function and configuration registers of a legacy PCMCIA card. |
|
Removes a legacy PCMCIA client driver's registration from PC Card card services. PC Card client drivers are stream interface drivers that use the PC Card services library to interact with their PC Card devices. |
|
Retrieves either the driver's global event mask or the event mask for a particular socket and function. The event mask specifies the events that trigger a callback. |
|
Retrieves the first tuple of the specified type for the specified socket and function. |
|
Retrieves the next tuple of the specified type for the specified socket and function. |
|
Reads and decodes the CISTPL_CONFIG and CISTPL_CFTABLE_ENTRY tuples. These tuples are both complex and difficult to decode; this function stores the information on those tuples in data structures that are easier to access. |
|
Retrieves the current status of the specified socket and function pair. |
|
Reads the data from the current tuple. |
|
Maps an area in legacy PCMCIA memory or I/O space to system memory and returns a pointer that accesses the mapped region. |
|
Modifies an existing legacy PCMCIA card configuration. It can set and reset information within the fAttributes parameter of the CARD_CONFIG_INFO structure. |
|
Turns the power off for a configured socket and function. If all functions on a given socket are powered off or are not configured, the socket itself powers down. |
|
Restarts the power on an already configured socket that has been powered down. |
|
Registers a callback function that is called by card services when a specified socket event occurs. The callback function notifies the driver of the event, such as card insertion, so that the driver can take the appropriate action. |
|
Places the selected socket and card into a memory-only interface, which is the default mode. |
|
Releases exclusive access to a socket and function pair. |
|
Stops notification of interrupts on the specified socket and function pair. |
|
Disables the callbacks requested by the CardRequestSocketMask function for a particular socket and function pair. |
|
Releases a memory or I/O window allocated by the CardRequestWindow function. |
|
Sets socket attributes, interface type, voltage, and registers, as specified by the CARD_CONFIG_INFO structure. |
|
Requests exclusive access to a specified socket and function pair. |
|
Registers an interrupt service callback function for the specified socket and function pair. |
|
Associates a socket and function pair with an event mask for the driver. PC Card card services then restricts its future callbacks to the driver to those associated with the event mask passed to this function. |
|
Allocates a window within system memory used to access legacy PCMCIA memory or I/O space. The window must be mapped by the CardMapWindow function before the window can access the legacy PCMCIA card. |
|
Resets a specified card function in a specified socket. |
|
Sets either the driver's global event mask, set initially by the CardRegisterClient function, or an event mask for the socket and function pair specified in the CARD_EVENT_MASK_PARMS structure. |
See Also
Concepts
Legacy PCMCIA Driver Support
Legacy PCMCIA Driver Registry Settings