RDF_CARD_POWER (Windows Embedded CE 6.0)
1/6/2010
The RDF_CARD_POWER callback function resets or powers down an inserted smart card. This callback function is mandatory.
Syntax
NTSTATUS (*ReaderFunction[RDF_CARD_POWER])(
PSMARTCARD_EXTENSION SmartcardExtension
);
Parameters
SmartcardExtension
[in] Points to the smart card extension of the device. In this SMARTCARD_EXTENSION structure, the MajorIoControlCode member must be set to IOCTL_SMARTCARD_POWER. And, the MinorIoControlCode member must contain one of the following minor codes, depending on the function to be performed.Minor code Description SCARD_COLD_RESET
Performs a cold reset of the card.
SCARD_WARM_RESET
Performs a warm reset of the card.
SCARD_POWER_DOWN
Switches off card power.
In this structure, the IoRequest.ReplyBufferLength value must be set to the length of the reply buffer.
When the callback function returns, The IoRequest.ReplyBuffer member will contain the ATR returned by the card. In addition, you must transfer the ATR to CardCapabilities.ATR.Buffer to let the library parse the ATR. The Information member of the structure in the IoRequest member receives the actual length of the ATR. In addition, you must transfer the length of the ATR to CardCapabilities.ATR.Length.
Return Value
This function returns an NTSTATUS value. Possible values are the following.
| Value | Description |
|---|---|
STATUS_SUCCESS |
Function successfully executed. |
STATUS_NO_MEDIA |
No card is in the reader. |
STATUS_IO_TIMEOUT |
The request has timed out. |
STATUS_BUFFER_TOO_SMALL |
The user buffer is not large enough to hold the ATR. |
Requirements
| Header | smclib.h |
| Windows Embedded CE | Windows CE 3.0 and later |