How to Implement BinFS (Windows Embedded CE 6.0)
1/6/2010
You can implement the binary ROM image file system (BinFS) on NAND or NOR flash media to read the .bin file format generated by Romimage.exe. BinFS parses the .bin file records of each region is invisible to the end user. To implement BinFS, you must add multi-bin region support to an existing boot loader, along with the necessary modifications to the Config.bib file to enable BinFS to read your run-time image properly.
Hardware and Software Assumptions
- You have access and familiarity with Platform Builder and the build process.
- You have basic knowledge of the Windows Embedded CE OS, Romimage, and associated file formats. For more information on Romimage, see Romimage.
Procedure
| Step | Topic |
|---|---|
1. Develop a boot loader for your target device. |
|
2. Add support for BinFS to your boot loader. |
|
3. Modify the MEMORY section of the Config.bib file to support BinFS. |
Modifying the MEMORY Section of the Config.bib File to Support BinFS |
4. Modify the CONFIG section of the Config.bib file to support BinFS. |
Modifying the CONFIG Section of the Config.bib File to Support BinFS |
5. If your OS design supports User Mode Drivers, modify the Common.bib file to ensure that the driver modules are non-pageable. |
|
6. If you are using the flash media driver (FMD) provided with Platform Builder, you do not need to modify the Platform.reg file. If you are using a custom FMD, you must modify the Platform.reg file to load BinFS on a block driver. For more information, see BinFS Registry Settings. |
Not applicable |
See Also
Reference
Concepts
Binary ROM Iimage File System (BinFS)
Boot Loader Support for BinFS
BinFS Registry Settings