Prerequisites for the USB Performance Test (Windows Embedded CE 6.0)
1/6/2010
The following table shows the hardware required on the host for the USB Performance Test.
| Requirements | Description |
|---|---|
Test platform |
Test host |
USB host controller card |
Provides functionality for the performance test |
CEPC |
Used as a test function, can alternatively use CEPC as host and another platform as the function. |
Net2280 card |
Any USB Function controller card should work provided that the drivers are supplied. |
USB cable |
Needed for setting up the test |
The following table shows the software required on the host for the USB Performance Test.
| Requirements | Description |
|---|---|
Tux.exe |
Tux test harness, required for test execution |
Kato.dll |
Kato logging engine, required for logging the test data |
Ktux.exe |
Kernel mode test utility |
Usbperf.dll |
Test module |
USB host controller driver |
USB support required (USB, EHCI/OHCI/UHCI) |
The following table shows the software required on the device for the USB Performance Test.
| Requirements | Description |
|---|---|
Lufldrv.exe |
Driver load tool |
LpBkCfg1.dll |
Configures a USB function controller with six end-points in addition to end-point zero |
LpBkCfg2.dll |
Configures a USB function controller with four end-points in addition to end-point zero |
Net2280lpbk.dll |
Netchip NET2280 USB 2.0 data loopback driver |
Net2280.dll |
Netchip NET2280 USB 2.0 function bus driver |