ICOP eBox 3300 Development Kit (Compact 7)
3/12/2014
Windows Embedded Compact 7 includes a board support package (BSP) for the ICOP eBox 3300 development kit, which uses the Vortex86DX system on chip (SoC). When you install Platform Builder for Windows Embedded Compact 7 with support for x86 processors, the following directory is created:
- %_WINCEROOT%\Platform\ebox3300
This directory contains the Platform.bib file and other configuration files, the catalog items for the BSP, and source code for the boot loader, drivers, kernel independent transport layer (KITL), and OEM adaptation layer (OAL).
Supported Features
The following table shows the hardware components that are supported in the board support package (BSP) for the ICOP eBox 3300 development kit for the Vortex86DX SoC.
Note
For information about hardware and software limitations for the ICOP eBox 3300 development kit, see the release notes.
| Hardware component | ICOP eBox 3300 hardware support | ICOP eBox 3300 BSP support |
|---|---|---|
RAM |
Up to 1 GB DDR2 |
If IMGRAMxxx is not set, by default the BSP detects the RAM size up to 3 GB (beyond the hardware limit). |
Flash memory |
512 MB |
Yes. Flash storage acts similar to an Integrated Drive Electronics (IDE) hard drive. |
Boot ROM |
BIOS acts as boot ROM |
Yes |
Timers |
Two sets of 8254 timers |
Yes (two sets supported) |
Clock speed |
600 MHz to 1 GHz |
Not applicable |
Real-time clock |
Yes |
Yes |
VGA video adapter |
XGI Volari Z9s display chip |
Yes |
LCD display |
XGI Volari Z9s display chip |
Yes |
Ethernet port |
Yes |
R6040 Ethernet driver |
Serial port |
Yes |
Yes (two by default; up to four are supported) |
Memory card |
One slot, Type I/II (accepts Micro SD or memory card) |
Yes. The memory card slot is only for memory cards run in true IDE mode. Due to a connection to the internal IDE port, memory cards cannot be added to or removed from the development kit while the system is running. |
Mouse |
PS/2 or Universal Serial Bus (USB) |
Yes; PS/2 compatible with 8042 controller |
Keyboard |
PS/2 or USB |
Yes; PS/2 compatible with 8042 controller |
Touch controller |
No |
Not applicable |
USB host |
Three ports |
Yes (USB 2.0 Host Controller) |
USB function |
No |
Not applicable |
Serial Infrared (SIR) |
No |
Not applicable |
Fast Infrared (FIR) |
No |
Not applicable |
Audio output |
Yes |
CM119 driver through onboard USB bus |
Audio input |
Yes |
CM119 driver through onboard USB bus |
Parallel for printing |
No |
Not applicable |
Integrated Device Electronics (IDE) |
Yes |
Supports two Ultra-DMA 100 channels. Primary channel supports one Secure Digital (SD) card. |
Smart card |
No |
Not applicable |
IEEE 1394 |
No |
Not applicable |
Floppy disk drive |
No |
Not applicable |
TV output |
No |
Not applicable |
Floating point unit |
Yes |
Yes |
Expansion connector |
No |
Not applicable |
PCI slots |
No |
Not applicable |
Compact PCI or PCI extender |
Mini PCI socket |
No |
Logic analyzer probes |
No |
Not applicable |
IEEE 1149.1-compliant hardware (JTAG) |
Yes |
Not applicable |
Debug light-emitting diodes (LEDs) |
No |
Not applicable |
Companion or add-on cards |
No |
Not applicable |