Share via

NDIS_NET_BUFFER_LIST_8021Q_INFO (Compact 7)

  • Article

3/12/2014

This structure specifies 802.1Q information that is associated with a NET_BUFFER_LIST structure.

Syntax

typedef struct _NDIS_NET_BUFFER_LIST_8021Q_INFO {
  union {
    struct {
      UINT32  UserPriority:3;
      UINT32  CanonicalFormatId:1;
      UINT32  VlanId:12;
      UINT32  Reserved:16;
    } TagHeader;
    struct {
      UINT32  UserPriority:3;
      UINT32  CanonicalFormatId:1;
      UINT32  VlanId:12;
      UINT32  WMMInfo:4;
      UINT32  Reserved:12;
    } WLanTagHeader;
    PVOID  Value;
  };
} NDIS_NET_BUFFER_LIST_8021Q_INFO, *PNDIS_NET_BUFFER_LIST_8021Q_INFO;

Members

  • TagHeader
    A member in the union that is contained in NDIS_NET_BUFFER_LIST_8021Q_INFO. 802.3 Ethernet miniport drivers use TagHeader to access 802.1Q information. TagHeader is a bit field that has the following members:

    • UserPriority
      Specifies 802.1p priority information that is used to establish packet priority in shared-media 802 networks. The bits in this member specify an 802.1p priority value.
    • CanonicalFormatId
      This member should be set to zero, which indicates that all MAC address information present in a packet is in canonical format (that is, simplest form).
    • VlanId
      Identifies the VLAN that a packet belongs to. Outgoing packets are marked with the VLAN identifier.
    • Reserved
      Reserved; set to 0 (zero).

  • WLanTagHeader
    A member in the union that is contained in NDIS_NET_BUFFER_LIST_8021Q_INFO. Native 802.11 miniport drivers use WLanTagHeader to access 802.1Q information. WLanTagHeader is a bit field that has the following members:

    • UserPriority
      Specifies 802.1p priority information that is used to establish packet priority in shared-media 802 networks. The bits in this member specify an 802.1p priority value.
    • CanonicalFormatId
      This member should be set to zero, which indicates that all MAC address information present in a packet is in canonical format (that is, simplest form).
    • VlanId
      Identifies the VLAN that a packet belongs to. Outgoing packets are marked with the VLAN identifier.

    • WMMInfo
      A wireless multimedia (WMM) integer value that is the same as the traffic identifier (TID) fields that appear in certain frames that are used to deliver and to control the delivery of 802.1Q Quality of Service (QoS) data. The values 0 through 7 represent QoS user priorities (UPs) for the MAC service data units (MSDUs). The values 8 through 15 are reserved. Therefore, the higest bit in WMMInfo must be zero.

      Note

      Traffic specification (TSPEC) and traffic classification (TCLAS) are not supported.

    • Reserved
      Reserved; set to 0 (zero).
  • Value
    A member in the union that is contained in NDIS_NET_BUFFER_LIST_8021Q_INFO. Value contains a pointer value that is type-compatible with the NetBufferListInfo member in the NET_BUFFER_LIST structure.

Remarks

To retrieve or insert 802.1Q information that is associated with a NET_BUFFER_LIST structure, an NDIS driver calls the NET_BUFFER_LIST_INFO macro and specifies the Ieee8021QNetBufferListInfo information type.

The NET_BUFFER_LIST_INFO macro returns the pointer that is specified in the Value member of the NDIS_NET_BUFFER_LIST_8021Q_INFO structure. The NDIS driver can use the TagHeader or WLanTagHeader member of the union to access specific types of information, such as 802.1p priority and VLAN identifier information. The WLanTagHeader member provides access to the wireless multimedia (WMM) information in addition to the information that is available through the TagHeader member.

Miniport drivers that support the 802.1q tag in hardware must use the NDIS_NET_BUFFER_LIST_8021Q_INFO structure for transmit and receive operations:

  • For transmit operations, the miniport driver must check for NDIS_NET_BUFFER_LIST_8021Q_INFO OOB data in the NET_BUFFER_LIST structure. The miniport driver must make sure that the hardware creates the 802.1q tag from the NDIS_NET_BUFFER_LIST_8021Q_INFO specifications and insert it into the Ethernet frame.
  • For receive operations, the miniport driver must remove the 802.1q tag from the Ethernet frame and map the 802.1q tag information into the NDIS_NET_BUFFER_LIST_8021Q_INFO OOB data in the NET_BUFFER_LIST structure before indicating the data to NDIS with the NdisMIndicateReceiveNetBufferLists function.

Requirements

Header

ndis.h

See Also

Reference

NDIS NET_BUFFER Structures
NdisMIndicateReceiveNetBufferLists
NET_BUFFER_LIST
NET_BUFFER_LIST_INFO