Share via

OID_DOT11_ENABLED_MULTICAST_CIPHER_ALGORITHM (Compact 7)

  • Article

3/12/2014

When set, the OID_DOT11_ENABLED_MULTICAST_CIPHER_ALGORITHM object identifier (OID) requests that the miniport driver set the Extensible Station (ExtSTA) msDot11EnabledMulticastCipherAlgo management information base (MIB) object to the specified data.

When queried, this OID requests that the miniport driver return the value of the msDot11EnabledMulticastCipherAlgo MIB object.

The msDot11EnabledMulticastCipherAlgo MIB object specifies the list of multicast cipher algorithms that the 802.11 station enables for use when it connects to a basic service set (BSS) network. After OID_DOT11_CONNECT_REQUEST is set, the 802.11 station will try to connect to a BSS whose 802.11 Beacon or Probe Response frames specify support for a multicast cipher algorithm defined by an entry within the msDot11EnabledMulticastCipherAlgo MIB object.

Note

Support for this OID is mandatory if the 802.11 station supports multicast cipher algorithms. The miniport driver returns a list of supported multicast cipher algorithms when OID_DOT11_SUPPORTED_MULTICAST_ALGORITHM_PAIR is queried.

The data type for this OID is the DOT11_CIPHER_ALGORITHM_LIST structure.

When OID_DOT11_ENABLED_MULTICAST_CIPHER_ALGORITHM is set, the miniport driver must do the following:

  • If the uNumOfEntries member of the DOT11_CIPHER_ALGORITHM_LIST structure is set to zero, fail the set request by returning NDIS_STATUS_INVALID_DATA from its MiniportOidRequest function. The msDot11EnabledMulticastCipherAlgo MIB object must always contain at least one entry.
  • If the 802.11 station does not support a specified multicast cipher algorithm, return NDIS_STATUS_INVALID_DATA from its MiniportOidRequest function.
  • If the 802.11 station does not support any of the specified multicast cipher algorithms for any of the enabled authentication algorithms defined by the ExtSTA msDot11EnabledAuthAlgo MIB object, return NDIS_STATUS_INVALID_DATA from its MiniportOidRequest function.
    For more information about the msDot11EnabledAuthAlgo MIB object, see OID_DOT11_ENABLED_AUTHENTICATION_ALGORITHM.
  • Enable the specified multicast cipher algorithms for any enabled authentication algorithm that supports the cipher.
  • Disable all supported multicast cipher algorithms that are not in the specified list.

When OID_DOT11_ENABLED_MULTICAST_CIPHER_ALGORITHM is queried, the miniport driver must do the following:

  • If this OID was previously set, returns the list of multicast cipher algorithms in the same order as they were set.
  • If OID_DOT11_ENABLED_MULTICAST_CIPHER_ALGORITHM was not previously set, returns its default multicast ciphers in the list.
  • The miniport driver cannot return an empty list of multicast cipher algorithms. If the 802.11 station has not enabled any multicast cipher algorithms, the miniport driver must return a list that contains DOT11_CIPHER_ALGO_NONE.

The default value for the msDot11EnabledMulticastCipherAlgo MIB object is the list of multicast ciphers supported by the enabled authentication algorithms specified by the msDot11EnabledAuthAlgo MIB object. The default multicast cipher list must be ordered by preference. For more information about cipher preference, see DOT11_CIPHER_ALGORITHM.

The miniport driver must set the msDot11EnabledMulticastCipherAlgo MIB object to the default multicast cipher if the following occurs:

  • The miniport driver’s MiniportInitializeEx function is called.
  • A method request of OID_DOT11_RESET_REQUEST is made to reset the media access control (MAC) layer of the 802.11 station and the bSetDefaultMIB member of the DOT11_RESET_REQUEST structure is TRUE.
  • The msDot11EnabledAuthAlgo MIB object is changed in response to a set request of the OID_DOT11_ENABLED_AUTHENTICATION_ALGORITHM OID.

The following points describe set requests of OID_DOT11_ENABLED_MULTICAST_CIPHER_ALGORITHM by the operating system:

  • The operating system might not always issue a set request of OID_DOT11_ENABLED_MULTICAST_CIPHER_ALGORITHM. In this case, the 802.11 station should use the default multicast cipher during any connection or roam operations.
  • If the operating system issues a set request of OID_DOT11_ENABLED_MULTICAST_CIPHER_ALGORITHM, it will come before a set request of OID_DOT11_ENABLED_UNICAST_CIPHER_ALGORITHM.

Requirements

Header

windot11.h

See Also

Reference

Native 802.11 Extensible Station OIDs
OID_DOT11_CONNECT_REQUEST
OID_DOT11_SUPPORTED_MULTICAST_ALGORITHM_PAIR
DOT11_CIPHER_ALGORITHM_LIST
MiniportOidRequest
OID_DOT11_ENABLED_AUTHENTICATION_ALGORITHM
MiniportInitializeEx
OID_DOT11_RESET_REQUEST
OID_DOT11_ENABLED_UNICAST_CIPHER_ALGORITHM
Native 802.11 Wireless LAN OIDs

Other Resources

DOT11_CIPHER_ALGORITHM