FwpsInjectNetworkSendAsync0 (Compact 7)

3/12/2014

This function injects packet data into the send data path.

Syntax

NTSTATUS NTAPI
  FwpsInjectNetworkSendAsync0(
    IN HANDLE  injectionHandle,
    IN OPTIONAL HANDLE  injectionContext,
    IN UINT32  flags,
    IN COMPARTMENT_ID  compartmentId,
    IN OUT NET_BUFFER_LIST  *netBufferList
    IN FWPS_INJECT_COMPLETE0  completionFn,
    IN OPTIONAL HANDLE  completionContext
    );

Parameters

• injectionHandle
  An injection handle that was previously created by a call to the FwpsInjectionHandleCreate0 function with the flags parameter set to FWPS_INJECTION_TYPE_NETWORK

• injectionContext
  An optional handle to the injection context. If it is specified, it can be obtained by calling the FwpsQueryPacketInjectionState0 function when the packet injection state FWPS_PACKET_INJECTION_STATE is FWPS_PACKET_INJECTED_BY_SELF or FWPS_PACKET_PREVIOUSLY_INJECTED_BY_SELF

• flags
  Reserved. Callout drivers must set this parameter to zero

• compartmentId
  The identifier of the routing compartment into which the packet data is injected, specified as a COMPARTMENT_ID type. This identifier is provided to a callout through the compartmentId member of the FWPS_INCOMING_METADATA_VALUES0 structure that is passed to the callout's classifyFn callout function. If the compartmentId member is available to callouts, FWPS_METADATA_FIELD_COMPARTMENT_ID will be set in the currentMetadataValues member. Otherwise, set this parameter to UNSPECIFIED_COMPARTMENT_ID

• netBufferList
  A pointer to a NET_BUFFER_LIST structure that describes the packet data that is being injected. A callout driver allocates a NET_BUFFER_LIST structure to use to insert packet data by calling either the FwpsAllocateCloneNetBufferList0 function or the FwpsAllocateNetBufferAndNetBufferList0 function. The NET_BUFFER_LIST structure must begin with an IP header

• completionFn
  A pointer to a completionFn callout function that is provided by the callout driver. The filter engine calls this function after the packet data, described by the netBufferList parameter, has been injected into the network stack

• completionContext
  A pointer to a callout driver-provided context that is passed to the callout function pointed to by the completionFn parameter. This parameter is optional and can be NULL

Return Value

The FwpsInjectNetworkSendAsync0 function returns one of the following NTSTATUS codes.

Remarks

A callout driver calls the FwpsInjectNetworkSendAsync0 function to insert network packet data into the send data path. This function can execute asynchronously. Callout drivers typically insert data into the network stack when modifying packet data.

If the return value is not STATUS_SUCCESS, the completion function is not called. In this case, the net buffer list pointed to by netBufferList must be freed by a call to the FwpsFreeNetBufferList0 or FwpsFreeCloneNetBufferList0 functions.

The injected packet can be indicated to the callout driver again. To prevent infinite looping, the driver should first call the FwpsQueryPacketInjectionState0 function recalling the classifyFn callout function. The driver should allow packets that have the injection state FWPS_PACKET_INJECTION_STATE set to FWPS_PACKET_INJECTED_BY_SELF or FWPS_PACKET_PREVIOUSLY_INJECTED_BY_SELF.

Requirements

See Also

Reference

Functions Called by Callout Drivers
FWPS_INCOMING_METADATA_VALUES0
classifyFn
NET_BUFFER_LIST
completionFn
FwpsAllocateCloneNetBufferList0
FwpsAllocateNetBufferAndNetBufferList0
FwpsFreeNetBufferList0
FwpsFreeCloneNetBufferList0
FwpsInjectionHandleCreate0
FwpsInjectionHandleDestroy0
FwpsQueryPacketInjectionState0
WFP Callout Driver Functions