Share via

Windows CE Boot Loader Output for the AMD DBAu1500 Development Board

  • Article

The following text shows the Windows CE boot loader output for the AMD DBAu1500 Development Board.

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 13
 2003 23:05:28
Windows CE Loader 0.1 for AMD Alchemy DBAu1500 Built Mar 21 2003 at 11:05:11
System ready!
Preparing for download...

Press any key to break into configuration menu 5...
Press any key to break into configuration menu 4...
Press any key to break into configuration menu 3...
Press any key to break into configuration menu 2...
Press any key to break into configuration menu 1...
KITL device Au1mac     MAC 00:50:C2:0C:40:C0

** Device Name DBAU16576 ** InitDHCP():: Calling ProcessDHCP() ProcessDHCP()::DHCP_INIT Got Response from DHCP server, IP address: 172.29.30.127

ProcessDHCP()::DHCP IP Address Resolved as 172.29.30.127, netmask: 255.255.252.0
Lease time: 259200 seconds
Got Response from DHCP server, IP address: 172.29.30.127
No ARP response in 2 seconds, assuming ownership of 172.29.30.127
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255
.
.
.

If you press the SPACEBAR to break into the configuration menu, you will see the following output.

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Mar 13
 2003 23:05:28
Windows CE Loader 0.1 for AMD Alchemy DBAu1500 Built Mar 21 2003 at 11:05:11
System ready!
Preparing for download...

Press any key to break into configuration menu 5...
Press any key to break into configuration menu 4...
Press any key to break into configuration menu 3...
Press any key to break into configuration menu 2...

--------------------------------------------------------------------------------
 WinCE Loader 0.1 - Main Menu
--------------------------------------------------------------------------------
  [1] Set device name (actually *** AUTO ***)
  [2] Set Au1 MAC 0 address (actually 00:50:C2:0C:40:C0)
  [3] Set Au1 MAC 1 address (actually 00:50:C2:0C:40:C1)
  [4] Boot from flash (actually from network)
  [5] Select boot/debug device (actually Au1 MAC 0)
  [6] Disable KITL (actually enabled)
  [7] Set passive KITL mode (actually active)
  [8] Disable DHCP (actually enabled)
  [9] Set IP address (actually 0.0.0.0)
  [s] Save configuration
  [x] Exit and continue with actual setting

Selection:

See Also

How to Use the BSP for the AMD DBAu1500 Development Board

Last updated on Wednesday, April 13, 2005

© 2005 Microsoft Corporation. All rights reserved.