How to Use the BSP for the Hitachi US7750 HARP (Aspen) SDB
You can use the sample board support package (BSP) provided by Platform Builder to quickly evaluate the new Windows CE .NET operating system (OS) features on the Hitachi US7750 HARP (Aspen) standard development board (SDB).
For more information about the sample BSPs included in Platform Builder for SHx microprocessors, see SHx Board Support Packages.
Hardware and Software Assumptions
- You included support for SH4 microprocessors when you installed Platform Builder 4.2. If you did not, reinstall Platform Builder.
- You are downloading a Windows CE OS image to a Hitachi US7750 HARP (Aspen) SDB.
To track your progress in the following table, select the check box next to each step.
| Step | Topic | |
|---|---|---|
| 1. From the New Platform Wizard, select support for the SH4 microprocessor. | Creating a Platform | |
| 2. Review the supported hardware and software features on the SDB and familiarize yourself with any limitations that may impact your platform on the SDB. | Hitachi US7750 HARP (Aspen) SDB Supported Features | |
| 3. Set up the SDB. | Setting Up the Hitachi US7750 HARP (Aspen) SDB Hardware | |
| 4. Modify the switch and jumper settings on the SDB. | Modifying the Hitachi US7750 HARP (Aspen) SDB Switches and Jumpers | |
| 5. Configure the Microsoft HyperTerminal application to receive debug messages. | Configuring HyperTerminal for BSPs | |
| 6. Build the platform. | Building a Platform | |
| 7. Download the Ethernet boot loader to ROM or flash the SDB. | Downloading the Boot Loader to the Hitachi US7750 HARP (Aspen) SDB to Flash | |
| 8. Download the OS image to the SDB. | Downloading the OS Image to the Hitachi US7750 HARP (Aspen) SDB |
See Also
Supported Board Support Packages
Last updated on Wednesday, April 13, 2005
© 2005 Microsoft Corporation. All rights reserved.