Wlan L1 Test 08 - Scan for Networks
This automated test issues a scan request and enumerates networks after the scan.
Test details
Associated requirements |
Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~1 minutes |
Categories |
Basic Certification |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
This test will do the following:
Test will disable the device.
Test will enable the device.
Test will start a scan with the option to flush set to true.
Test will fail if scan complete event is not returned in less than six seconds.
Test will fail if a scan failure event is returned.
Test will enumerate available networks after a completed scan.
Test will fail if there are no networks in the enumerated list.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.