WiFi Direct StandardDiscovery Targeted
This test suite verifies the various required discovery types to be supported by the driver.
Test details
Associated requirements |
Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast4Clients Device.Network.WLAN.WiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.WiFiDirect.SupportAtLeast4Clients |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~10 minutes |
Categories |
Certification Reliability |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
This test suite does the following:
The SUT is brought up in discoverable mode.
The DUT discovers the SUT in a loop for a fixed amount of time and expects to find the SUT.
The DUT and SUT sides will either be connected to the access point or not. All the permutations of NoAP, APConnectBeforeWFD and APConnectAfterWFD are covered.
Ping the access point while doing WFD discovery to test multichannel support in the access point.
Verify that the access points are on non-social channels.
The passing criteria of the tests are based on how quickly the devices were found.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.
More information
Command syntax
| Parameter | Description |
|---|---|
AP1Password |
The root password for the first physical access point. |
AP1IPAddress |
The IP address of the WAN port of the first physical access point. |
AP2Password |
The root password for the second physical access point. |
AP2IPAddress |
The root password for the second physical access point. |
AP1Channel |
The wireless channel configured on the first access point. |
AP2Channel |
The wireless channel configured on the second access point. |