Wlan L1 Test 06 - Toggle airplane mode
This automated test toggles the radio states in the same way as the user interface airplane mode option..
Test details
Associated requirements |
Device.Network.WLAN.Base.ConformToNDIS Device.Network.WLAN.CSBBase.ConformToNDIS |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~1 minutes |
Categories |
Basic Certification |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
The test completes the following:
Disables each radio that is reported to the operating system..
Each radio must change state and report its updated state in less than ten seconds.
Enables each radio that is reported to the operating system.
Each radio must change state and report its update state in under ten seconds
The test allows for and can accommodate devices that change the state of all radios when only one radio is requested.
The test will only fail if an exception is thrown when attempting any of the above tasks, or if radios do not change state within the time required.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.