Share via

Wlan L3 Test 02 - Connect to a WPA2 PSK AES AP (strict) 5 Times

  • Article

This automated test runs the following test five times: Wlan L2 Test 02 - Connect to a WPA2 PSK AES AP (strict).

Test details

Associated requirements

Device.Network.WLAN.Base.MeetScanAndConnReq Device.Network.WLAN.CSBBase.MeetScanAndConnReq

See the device hardware requirements.

Platforms

Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~15 minutes

Categories

Certification Reliability

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites. Make sure that device has been enabled, drivers are properly installed, and the device is properly inserted.

The test runs the following test 5 times: Wlan L2 Test 02 - Connect to a WPA2 PSK AES AP (strict). Any error encountered in any of the five attempts will fail the test.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

Parameter Description

WPA2_PSK_AES_SSID

The SSID of a WPA2_PSK_AES network to connect to.

WPA2_PSK_Password

The password for the WPA2_PSK network.

 

WLAN L3 Tests

 

 

Send comments about this topic to Microsoft