Test.LinearityHorizontalMultiple
This test verifies that the touchpad reports a straight line (that corresponds to contact movement) when two contacts that are 11mm apart are moved horizontally back and forth across the surface of a touchpad (within a tolerance of .5mm).
Test details
Associated requirements |
Device.Input.PrecisionTouchpad.Precision.HVInputSeparation Device.Input.PrecisionTouchpad.Precision.Linearity Device.Input.PrecisionTouchpad.Precision.MotionJitter System.Client.PrecisionTouchpad.PrecisionTouchpad |
Platforms |
Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~2 minutes |
Categories |
Certification |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Mouse or other Pointing Device Testing Prerequisites.
This test requires very precise movement in a straight line. We recommend that you perform this test by using a precision rig or other precision device that is capable of straight line movement without any jitter.
Place two precision contacts 11mm apart slightly outside the left edge of the touchpad.
Drag the contacts in a straight line from left to the right across the touchpad.
Drag the contacts the other direction from right up to left.
Repeat this pattern for a total of five iterations.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Input Testing.
| Error | Description/Workaround |
|---|---|
[15] contact didn’t move in straight line |
Reported path strayed varied from a straight line by more than the allowed tolerance. |
[14] packet too far from edge: ### |
|
More information
Command syntax
| Command | Description |
|---|---|
ptlogo.exe Test.LinearityHorizontalMultiple.json |
Runs the test. |
File list
| File | Location |
|---|---|
ptlogo.exe |
<testbinroot>\input\PrecisionTouchpad\ |
config.json |
<testbinroot>\input\PrecisionTouchpad\ |
Test. Test.LinearityHorizontalMultiple.json |
<testbinroot>\input\PrecisionTouchpad\ |