Wlan L1 Test 02 - Query Interface Properties
This automated test queries the interface for a variety of common properties.
Test details
Associated requirements |
Device.Network.WLAN.Base.ConformToNDIS Device.Network.WLAN.CSBBase.ConformToNDIS |
Platforms |
Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~1 minutes |
Categories |
Basic Certification |
Type |
Automated |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.
This test queries the device for the following properties:
IsMediaStreamingEnabled
IsBackgroundScanEnabled
IsSafeModeSupported
sSafeModeCertified
GetCurrentOperationMode
GetInterfaceState
sManagementFrameProtectionSupported
IsHostedNetworkCapable
enumerate all radios and radio states
IsAutoConfigEnabled
enumerate all support infrastructure cipher pairs
devices without Connected Standby must enumerate supported adhoc cipher pairs
GetBSSMode
GetCountryList
GetConnectionAttributes
GetRSSi
GetChannel
Any returned failure in the WLAN service API from the device these capabilities are queried will result in a failure in the test
The test will fail if the following is true:
There are less than three infrastructure cipher pairs.
If DOT11_AUTH_ALGO_RSNA_PSK is not implemented.
Troubleshooting
For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.