Share via

WiFi Direct Proximity Tests - MultiMachine Stress

  • Article

This test repeatedly runs a basic end-to-end connection scenario by using the PeerFinder APIs over Wi-Fi Direct. The device under test (DUT) randomly selects an access point (AP) configuration for each iteration. The configurations include the following:

  • The DUT connects to no AP.

  • The DUT connects to a 2.4 GHz AP before a Wi-Fi Direct connection is established.

  • The DUT connects to a 5 GHz AP before a Wi-Fi Direct connection is established.

  • The DUT connects to a 2.4 GHz AP after a Wi-Fi Direct connection is established.

  • The DUT connects to a 5 GHz AP after a Wi-Fi Direct connection is established.

Test details

Associated requirements

Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.CSBWiFiDirect.SupportAtLeast4Clients Device.Network.WLAN.WiFiDirect.SupportAtLeast2WiFiDirectPortsConcurrently Device.Network.WLAN.WiFiDirect.SupportAtLeast4Clients

See the device hardware requirements.

Platforms

Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86

Expected run time

~50 minutes

Categories

Certification Reliability

Type

Automated

 

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test requires three computers and two DD-WRT-capable access points.

Troubleshooting

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Command syntax

Parameter Description

AP1IPAddress

IP Address of the first AP that connects to the system.

AP2IPAddress

IP Address of the second AP that connects to the system.

AP1Password

Root password for the first AP that connects to the system.

AP2Password

Root password for the second AP that connects to the system.

 

WiFi Direct Proximity Tests

 

 

Send comments about this topic to Microsoft