Test.ZHeight
This test verifies that device does not detect contacts that are not directly on the surface of the touchpad.
Test details
Associated requirements |
Device.Input.PrecisionTouchpad.Precision.MaxReportZHeight |
Platforms |
Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~2 minutes |
Categories |
Certification |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: Mouse or other Pointing Device Testing Prerequisites.
To run this test, you will need precision capacitive contacts that can be placed 1mm above the surface of the touchpad and remain steady for a period of time. It is recommended that this test be performed by a robot or other precision mechanism.
Place 1mm thick material on top of touchpad.
Lower a precision contact until it just touches the non-conductive material.
Remove the material.
Leave contact in place above touchpad for 1 minute.
Verify that no contact is reported and press P to manually pass the test. If contact is reported, press F to fail the test.
Troubleshooting
For troubleshooting information, see Troubleshooting Device.Input Testing.
More information
Command syntax
| Command | Description |
|---|---|
ptlogo.exe Test.ZHeight.json |
Runs the test. |
File list
| File | Location |
|---|---|
ptlogo.exe |
<testbinroot>\input\PrecisionTouchpad\ |
config.json |
<testbinroot>\input\PrecisionTouchpad\ |
Test.ZHeight.json |
<testbinroot>\input\PrecisionTouchpad\ |