Windows Tablet Test (System)
This manual test tests the resume time for systems that support the Connected Standby state.
Test details
Associated requirements |
System.Client.Tablet.ColdBootLatency |
Platforms |
Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 |
Expected run time |
~1 minutes |
Categories |
Certification |
Type |
Manual |
Running the test
Before you run the test, complete the test setup as described in the test requirements: System Client Testing Prerequisites.
The system should appear to immediately awaken upon a resume. Together with the display, touch is the primary means by which this sense is communicated to the user.
To perform this test, put the computer into the Connected Standby state, and then resume. When the display is activated, touch the screen immediately and verify that the touch screen responds within a reasonable time. You should observe no visual delay.
After you accomplish this task, return to Windows tablet test (system) and select Yes if the system passed the requirement, or select No if the touch screen did not respond immediately.
Troubleshooting
For troubleshooting information, see Troubleshooting System Client Testing, Troubleshooting Device Digitizer Testing, and How to run the Windows HCK Tests for Touch and Pen Devices.
More information
For more information about this test, see How to Use the Windows Touch Quality Certification Tests.
Related topics
How to run the Windows HCK Tests for Touch and Pen Devices