RAS Connection Establishment
Applies To: Windows Server 2008 R2
Remote access involves the establishment of a dial-up or broadband connection with a remote access server. A dial-up client that connects to a server running Routing and Remote Access can be any PPP client. The client must have installed a modem, an analog telephone line or other wide area network (WAN) connection, and remote access software. Virtual private networking (VPN) clients that connect to Routing and Remote Access must be able to send TCP/IP packets to the remote access server over the Internet. Therefore, either a network adapter or modem with an analog telephone line or other WAN connection to the Internet is required.
Events
| Event ID | Source | Message |
|---|---|---|
RasClient |
The connection to %1 (<Server Name>) made using device %2 (<Device Name>) was terminated. The error code returned on failure is %3 (<err_code>) | |
RasClient |
ROUTERLOG_CORR_ID = <CoID> The user %1 (<domain\user>/system) has started dialing a <Phone/VPN/DCC/Internet/Broadband> connection using a <per-user/all-user> connection profile named %2 (connectoid-name). The connection settings are: AutoLogon = <Yes/No> UseRasCredentials = <Yes/No> VpnStrategy = <PPTP / PPTP then L2TP / L2TP / L2TP then PPTP / none> DataEncryption = <None / Requested / Require / Max> PrerequisiteEntry = <Previous Connection Dialed> CustomAuthKey = <None / EAP-TLS / etc> AuthRestriction Mask = < > | |
RasClient |
ROUTERLOG_CORR_ID = <CoID> The user %1 (<domain\user>/<system>) is trying to establish a link to the Remote Access Server for the connection named %2 (connectoid-name) using the following device: Server Address/Phone number = <server address/phone number> Device Name = <WAN MiniPort (L2TP) / WAN MiniPort (PPTP) / USB 56K Fax Modem / etc> Media Type = <RASTAPI / Serial / etc> Port = <COM1 / VPN309 /etc> | |
RasClient |
ROUTERLOG_CORR_ID = <CoID> The user (<domain\user>/<system>) has successfully established a link to the Remote Access Server using the following device Server Address/Phone number = <server IP address / phone number> Device Name: <WAN MiniPort (L2TP) / WAN MiniPort (PPTP) / USB 56K Fax Modem / etc> Media Type = <RASTAPI / Serial / etc> Port = <COM1 / VPN309 /etc> | |
RasClient |
ROUTERLOG_CORR_ID = <CoID> The link to the Remote Access Server has been established by user %1 <domain\user> | |
RasClient |
ROUTERLOG_CORR_ID = <CoID> The user %1 (<domain\user>) has dialed a connection named %2 (<connectoid-name>) to the Remote Access Server which has successfully connected. The connection parameters are: TunnelIpAddress = <Internal IP addr of tunnel / None> TunnelIpv6Address = <Internal IPv6 addr of tunnel /None> Dial-in user=<domain\username> | |
RasClient |
ROUTERLOG_CORR_ID = <CoID> The user %1 (<domain\user>) dialed a connection named %2 (<connectoid-name>) which has failed. The error code returned on failure is %3 (<err-code>) |