Install Operations Manager on a Single Server

This walkthrough guides you through an installation of System Center - Operations Manager on a single server. The features installed include the following:

• Management server

• Operations console

• Web console

• Reporting server

Prerequisites

You must ensure that your server meets the minimum supported configurations for System Center Operations Manager. For more information, see System Requirements for System Center Operations Manager.

Required SQL Server Components

• Database Engine Services - Full-Text and Semantic Extractions for Search (as called in SQL Server 2012 and later)

• Reporting Services - Native

Install the single server management group configuration

Follow these steps to install the single server management group configuration:

1. Sign in to the server by using an account that has local administrative credentials.

2. On the System Center Operations Manager installation media, run Setup.exe, and then select Install.

3. On the Getting Started, Select features to install page, select the Management server, Operations console, Web console, and Reporting server features. To read more about each feature and its requirements, select Expand all, or expand the buttons next to each feature. Then select Next.

4. On the Select installation location page, accept the default value, enter a new location, or browse to one. Then select Next.

C:\Program Files\Microsoft System Center\Operations Manager

C:\Program Files\Microsoft System Center\Operations Manager

C:\Program Files\Microsoft System Center\Operations Manager

C:\Program Files\Microsoft System Center 2016\Operations Manager

5. On the Prerequisites page, review and resolve any warnings or errors, and then select Verify Prerequisites Again to recheck the system.

   Note

   Installation of the web console requires that ISAPI and CGI Restrictions in IIS be enabled for ASP.NET 4. To enable this, select the web server in IIS Manager, and then double-click ISAPI and CGI Restrictions. Select ASP.NET v4.0.30319, and select Allow.

6. If the Prerequisites checker doesn't return any warnings or errors, the Prerequisites, Proceed with Setup page appears. Select Next.

7. On the Configuration, Specify an installation option page, select Create the first Management server in a new management group, enter a name for your management group and then select Next.

   Note

   After the management group name is set, it can't be changed. The Management Group name can't contain the following characters:

   ( ) ^ ~ : ; . ! ? " , ' ` @ # % \ / * + = $ | & [ ] < > { }
   

   Also, the Management Group name can't have a leading or trailing space. It's recommended that the Management Group name be unique within your organization if you plan to connect several management groups together.

8. On the Configuration, Please read the license terms page, review the Microsoft Software License Terms, select I have read, understood, and agree with the license terms, and select Next.

9. When the Configuration, Configure the operational database page opens, in the Server name and instance name box, enter the name of the server and the name of the SQL Server instance for the database server that will host the operational database. If you installed the SQL Server by using the default instance, you only have to enter the server name. If you changed the default SQL Server port, you must enter the new port number in the SQL Server port box.

   If you enter an invalid SQL Server and instance name, you see a red circle with a white X in it appear to the left of the Server name and instance name and SQL Server port.

   The white X appears under the following circumstances:

   • You entered an instance of SQL Server or a SQL Server port value that isn't valid or that doesn't exist.

   • The instance of SQL Server that you specified doesn't have the required configuration or features.

   • You entered a value that is out-of-range (for example, port 999999).

   • You entered an illegal character for that box (for example, server\instance%).

     You can hover the cursor over the Server name and instance text box to view additional information about the error.

10. After you enter the correct value for the SQL Server database server name, select the SQL Server port box so that Setup will attempt to validate the values you entered for the SQL Server name and for the port number.

11. In the Database name, Database size (MB)Data file folder, and Log file folder box, we recommend that you accept the default values. Select Next

    Note

    These paths don't change if you connect to a different instance of the SQL Server.

    Important

    You might receive a message about having the wrong version of the SQL Server, or you might encounter a problem with the SQL Server Windows Management Instrumentation (WMI) provider. To resolve this problem, open a Command Prompt window, select Run as administrator, and then run the following command. In the command, replace the <path> placeholder with the location of the SQL Server:

    mofcomp.exe "<path>\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
    

    Note

    The SQL Server model database size must not be greater than 100 MB. If it is, you might encounter an error in Setup regarding the inability to create a database on SQL due to user permissions. To resolve the issue, you must reduce the size of the model database.

12. When the Configuration, Configure the data warehouse database page opens, in the Server name and instance name box, enter the server name and the name of the instance of SQL Server for the database server that will host the data warehouse database.

13. Because this is a single-server installation, accept the default value of Create a new data warehouse database.

14. In the Database name, Database size (MB)Data file folder, and Log file folder boxes, we recommend that you accept the default values. Select Next.

    Important

    You might receive a message about having the wrong version of the SQL Server, or you might encounter a problem with the SQL Server Windows Management Instrumentation (WMI) provider. To resolve this problem, open a Command Prompt window, select Run as administrator, and then run the following command. In the command, replace the <path> placeholder with the location of SQL Server:

    mofcomp.exe "<path>\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
    

    Note

    These paths don't change if you connect to a different instance of the SQL Server.

15. On the Configuration, SQL Server instance for reporting services page, select the SQL Server database instance from the dropdown list. This dropdown list contains the SQL Server database instance name that was created when you installed the SQL Server. Select Next.

16. On the Configuration, Specify a web site for use with the Web console page, select Default Web Site or the name of an existing website. Select the option Enable SSL only if the website has been configured to use SSL, and select Next.

17. On the Configuration, Select an authentication mode for use with the Web console page, select your option, and select Next.

18. On the Configuration, Configure Operations Manager accounts page, we recommend that you use Domain Account option for the Management Server Action Account, System Center Configuration service and System Center Data Access service, the Data Reader account, and the Data Writer account.

    Enter the credentials for a domain account in each field. The error icon will disappear after account validation. Select Next.

19. On the Configuration, Diagnostic and Usage Data page, review the information and select Next.

20. If Windows Update isn't activated on the computer, the Configuration, Microsoft Update page appears. Select your options, and select Next.

21. Review the options on the Configuration, Installation Summary page, and select Install. Setup continues.

22. When Setup is finished, the Setup is complete page appears. Select Close and the Operations console will open.

Install the Operations Manager single server management group configuration from the command prompt

Follow these steps to install the Operations Manager single server management group configuration from the command prompt:

1. Sign in to the server by using an account that has local administrative credentials.

2. Open the command prompt by using the Run as Administrator option.

   Note

   Setup.exe requires administrator privileges because the Setup process requires access to system processes that can only be used by a local administrator.

3. Change the path to where the System Center Operations Manager setup.exe file is located, and run the following command.

   Important

   Use the /WebConsoleUseSSL parameter only if your website has Secure Sockets Layer (SSL) activated.

   For a default web installation, specify Default Web Site for the /WebSiteName parameter.

   Important

   The following command assumes that you specified the Local System for the Management server action account (/UseLocalSystemActionAccount) and Data Access service (/UseLocalSystemDASAccount). To specify a domain\user name for these accounts, you must provide the following parameters instead.

   /ActionAccountUser: <domain\username> /ActionAccountPassword: <password>

   /DASAccountUser: <domain\username> /DASAccountPassword: <password>

   setup.exe /silent /install
   /components:OMServer,OMConsole,OMWebConsole,OMReporting
   /ManagementGroupName: "<ManagementGroupName>"
   /SqlServerInstance: <server\instance>
   /SqlInstancePort: <SQL instance port number>
   /DatabaseName: <OperationalDatabaseName>
   /DWSqlServerInstance: <server\instance>
   /DWSqlInstancePort: <SQL instance port number>
   /DWDatabaseName: <DWDatabaseName>
   /UseLocalSystemActionAccount /UseLocalSystemDASAccount
   /DatareaderUser: <domain\username>
   /DatareaderPassword: <password>
   /DataWriterUser: <domain\username>
   /DataWriterPassword: <password>
   /AcceptEndUserLicenseAgreement: [0|1]
   /WebSiteName: "<WebSiteName>" [/WebConsoleUseSSL]
   /WebConsoleAuthorizationMode: [Mixed|Network]
   /SRSInstance: <server\instance>
   /SendODRReports: [0|1]
   /EnableErrorReporting: [Never|Queued|Always]
   /SendCEIPReports: [0|1]
   /UseMicrosoftUpdate: [0|1]
   

Verify the installation

Confirm the health of the management server

Follow these steps to confirm the health of the management server:

1. In the Operations console, select the Administration workspace.

2. In Device Management, select Management Servers. In the results pane, you should see the Management server that you installed with a green check mark in the Health State column.

Confirm the health of Operations Manager reports

Follow these steps to confirm the health of Operations Manager reports:

1. In the Operations console, in the navigation pane, select the Reporting button.

   Note

   After the initial deployment, it can take up to 30 minutes for the reports to appear.

2. Select Microsoft ODR Report Library, and then double-click any of the reports listed. The selected report is generated and displays in a new window.

   By default, you should see the following reports:

   • Alerts Per Day

   • Instance Space

   • Management Group

   • Management Packs

   • Most Common Alerts

   Note

   Selecting the Management Packs report is particularly useful at this point because it provides you with a full inventory of the management packs that have been installed on your server.

3. Close the report window.

Next steps

Now that you've installed System Center Operations Manager, you can deploy agents and start monitoring your applications, servers, and network devices. For more information, see Agent deployment planning and Operations Manager Monitoring Scenarios.