gpioclx.h header
This header is used by parports. For more information, see:
gpioclx.h contains the following programming interfaces:
Functions
| GPIO_CLX_AcquireInterruptLock The GPIO_CLX_AcquireInterruptLock method acquires an interrupt lock on a bank of pins in the general-purpose I/O (GPIO) controller. |
| GPIO_CLX_ProcessAddDevicePostDeviceCreate The GPIO_CLX_ProcessAddDevicePostDeviceCreate method passes a framework device object to the GPIO framework extension (GpioClx). |
| GPIO_CLX_ProcessAddDevicePreDeviceCreate The GPIO_CLX_ProcessAddDevicePreDeviceCreate method loads initialization information into two structures that are passed as input parameters to the WdfDeviceCreate method. |
| GPIO_CLX_RegisterClient The GPIO_CLX_RegisterClient method registers a general-purpose I/O (GPIO) controller driver as a client of the GPIO framework extension (GpioClx). |
| GPIO_CLX_ReleaseInterruptLock The GPIO_CLX_ReleaseInterruptLock method releases an interrupt lock on the specified bank. |
| GPIO_CLX_UnregisterClient The GPIO_CLX_UnregisterClient method removes a general-purpose I/O (GPIO) controller driver's registration with the GPIO framework extension (GpioClx). |
Callback functions
| GPIO_CLIENT_CLEAR_ACTIVE_INTERRUPTS The CLIENT_ClearActiveInterrupts event callback function clears active interrupts on a set of general-purpose I/O (GPIO) pins that are configured as interrupt inputs. |
| GPIO_CLIENT_CONNECT_IO_PINS The CLIENT_ConnectIoPins event callback function opens a logical connection to a set of general-purpose I/O (GPIO) pins and configures these pins for data read or write operations. |
| GPIO_CLIENT_CONTROLLER_SPECIFIC_FUNCTION The CLIENT_ControllerSpecificFunction event callback function performs an operation that is specific to a particular general-purpose I/O (GPIO) controller. |
| GPIO_CLIENT_DISABLE_INTERRUPT The CLIENT_DisableInterrupt event callback function disables interrupts on a general-purpose I/O (GPIO) pin that is configured as an interrupt input. |
| GPIO_CLIENT_DISCONNECT_IO_PINS The CLIENT_DisconnectIoPins event callback function closes a logical connection to a set of general-purpose I/O (GPIO) pins that are configured for data read or write operations. |
| GPIO_CLIENT_ENABLE_INTERRUPT The CLIENT_EnableInterrupt event callback function enables interrupts on a general-purpose I/O (GPIO) pin that is configured as an interrupt input. |
| GPIO_CLIENT_MASK_INTERRUPTS The CLIENT_MaskInterrupts event callback function masks interrupts on a set of general-purpose I/O (GPIO) pins that are configured as interrupt inputs. |
| GPIO_CLIENT_PRE_PROCESS_CONTROLLER_INTERRUPT The CLIENT_PreProcessControllerInterrupt event callback function performs any pre-processing of a general-purpose I/O (GPIO) interrupt that must be done immediately if the ISR is scheduled to run at a later time. |
| GPIO_CLIENT_PREPARE_CONTROLLER The CLIENT_PrepareController event callback function performs any operations that are needed to make the general-purpose I/O (GPIO) controller ready to be accessed by the GPIO controller driver. |
| GPIO_CLIENT_QUERY_ACTIVE_INTERRUPTS The CLIENT_QueryActiveInterrupts event callback function queries the state of a set of general-purpose I/O (GPIO) pins that are configured as interrupt inputs. |
| GPIO_CLIENT_QUERY_CONTROLLER_BASIC_INFORMATION The CLIENT_QueryControllerBasicInformation event callback function retrieves the hardware attributes of the general-purpose I/O (GPIO) controller. |
| GPIO_CLIENT_QUERY_ENABLED_INTERRUPTS The CLIENT_QueryEnabledInterrupts event callback function queries the state of a set of general-purpose I/O (GPIO) pins to determine which pins are both configured as interrupt inputs and enabled for interrupts. |
| GPIO_CLIENT_QUERY_SET_CONTROLLER_INFORMATION The CLIENT_QuerySetControllerInformation event callback function queries the general-purpose I/O (GPIO) controller driver for the specified set of attributes of the GPIO controller. |
| GPIO_CLIENT_READ_PINS The CLIENT_ReadGpioPins event callback function reads a set of general-purpose I/O (GPIO) pins that are configured as data inputs. |
| GPIO_CLIENT_READ_PINS_MASK The CLIENT_ReadGpioPinsUsingMask event callback function reads a bank of general-purpose I/O (GPIO) pins. |
| GPIO_CLIENT_RECONFIGURE_INTERRUPT The CLIENT_ReconfigureInterrupt event callback function reconfigures a general-purpose I/O (GPIO) pin that is used as an interrupt input. |
| GPIO_CLIENT_RELEASE_CONTROLLER The CLIENT_ReleaseController event callback function performs operations that are needed when the general-purpose I/O (GPIO) controller device is no longer accessible. |
| GPIO_CLIENT_RESTORE_BANK_HARDWARE_CONTEXT The CLIENT_RestoreBankHardwareContext event callback function restores the hardware context of a bank of general-purpose I/O (GPIO) pins. |
| GPIO_CLIENT_SAVE_BANK_HARDWARE_CONTEXT The CLIENT_SaveBankHardwareContext event callback function saves the hardware context of a bank of general-purpose I/O (GPIO) pins. |
| GPIO_CLIENT_START_CONTROLLER The CLIENT_StartController event callback function performs operations that are needed when the general-purpose I/O (GPIO) controller device enters the D0 power state. |
| GPIO_CLIENT_STOP_CONTROLLER The CLIENT_StopController event callback function performs operations that are needed to prepare the general-purpose I/O (GPIO) controller device to exit the D0 power state. |
| GPIO_CLIENT_UNMASK_INTERRUPT The CLIENT_UnmaskInterrupt event callback function unmasks the interrupt on a general-purpose I/O (GPIO) pin that is configured as an interrupt input. |
| GPIO_CLIENT_WRITE_PINS The CLIENT_WriteGpioPins event callback function writes to a set of general-purpose I/O (GPIO) pins that are configured as data outputs. |
| GPIO_CLIENT_WRITE_PINS_MASK The CLIENT_WriteGpioPinsUsingMask event callback function writes to a set of general-purpose I/O (GPIO) pins that are configured as data outputs. |
Structures
| CLIENT_CONTROLLER_BASIC_INFORMATION The CLIENT_CONTROLLER_BASIC_INFORMATION structure contains general-purpose I/O (GPIO) controller hardware attributes and configuration information. |
| CLIENT_CONTROLLER_QUERY_SET_INFORMATION_INPUT The CLIENT_CONTROLLER_QUERY_SET_INFORMATION_INPUT structure contains a request for the hardware attributes of the general-purpose I/O (GPIO) controller. |
| CLIENT_CONTROLLER_QUERY_SET_INFORMATION_OUTPUT The CLIENT_CONTROLLER_QUERY_SET_INFORMATION_OUTPUT structure contains a set of general-purpose I/O (GPIO) controller attributes that were requested by the GPIO framework extension (GpioClx). |
| CLIENT_QUERY_BANK_POWER_INFORMATION_OUTPUT The CLIENT_QUERY_BANK_POWER_INFORMATION_OUTPUT structure contains information about the power-management capabilities of a bank of general-purpose I/O (GPIO) pins. |
| CONTROLLER_ATTRIBUTE_FLAGS The CONTROLLER_ATTRIBUTE_FLAGS structure describes the hardware attributes of the general-purpose I/O (GPIO) controller device. |
| GPIO_CLEAR_ACTIVE_INTERRUPTS_PARAMETERS The GPIO_CLEAR_ACTIVE_INTERRUPTS_PARAMETERS structure describes a set of general-purpose I/O (GPIO) interrupt pins to clear. |
| GPIO_CLIENT_CONTROLLER_SPECIFIC_FUNCTION_PARAMETERS The GPIO_CLIENT_CONTROLLER_SPECIFIC_FUNCTION_PARAMETERS structure describes the input and output buffers for a controller-specific operation. |
| GPIO_CLIENT_REGISTRATION_PACKET The GPIO_CLIENT_REGISTRATION_PACKET structure contains registration information that the general-purpose I/O (GPIO) controller driver passes to the GPIO framework extension (GpioClx). |
| GPIO_CONNECT_IO_PINS_PARAMETERS The GPIO_CONNECT_IO_PINS_PARAMETERS structure describes a logical connection to a set of general-purpose I/O (GPIO) pins and specifies whether to configure these pins as data inputs or outputs. |
| GPIO_DISABLE_INTERRUPT_PARAMETERS The GPIO_DISABLE_INTERRUPT_PARAMETERS structure describes a general-purpose I/O (GPIO) interrupt pin to disable. |
| GPIO_DISCONNECT_IO_PINS_PARAMETERS The GPIO_DISCONNECT_IO_PINS_PARAMETERS structure describes a set of general-purpose I/O (GPIO) pins that are to be disconnected. |
| GPIO_ENABLE_INTERRUPT_PARAMETERS The GPIO_ENABLE_INTERRUPT_PARAMETERS structure specifies a general-purpose I/O (GPIO) pin and describes the interrupt attributes of this pin. |
| GPIO_MASK_INTERRUPT_PARAMETERS The GPIO_MASK_INTERRUPT_PARAMETERS structure describes a set of general-purpose I/O (GPIO) interrupt pins to mask. |
| GPIO_QUERY_ACTIVE_INTERRUPTS_PARAMETERS The GPIO_QUERY_ACTIVE_INTERRUPTS_PARAMETERS structure describes a set of general-purpose I/O (GPIO) interrupt pins to query for their enabled and active states. |
| GPIO_QUERY_ENABLED_INTERRUPTS_PARAMETERS The GPIO_QUERY_ENABLED_INTERRUPTS_PARAMETERS structure indicates which interrupt pins in a bank of general-purpose I/O (GPIO) pins are enabled. |
| GPIO_READ_PINS_MASK_PARAMETERS The GPIO_READ_PINS_MASK_PARAMETERS structure describes a read operation on a bank of general-purpose I/O (GPIO) pins. |
| GPIO_READ_PINS_PARAMETERS The GPIO_READ_PINS_PARAMETERS structure describes a read operation on a group of general-purpose I/O (GPIO) pins. |
| GPIO_RECONFIGURE_INTERRUPTS_PARAMETERS The GPIO_RECONFIGURE_INTERRUPTS_PARAMETERS structure describes the general-purpose I/O (GPIO) interrupt pin to reconfigure. |
| GPIO_SAVE_RESTORE_BANK_HARDWARE_CONTEXT_PARAMETERS The GPIO_SAVE_RESTORE_BANK_HARDWARE_CONTEXT_PARAMETERS structure describes a bank of general-purpose I/O (GPIO) pins whose hardware state is to be saved or restored. |
| GPIO_WRITE_PINS_MASK_PARAMETERS The GPIO_WRITE_PINS_MASK_PARAMETERS structure describes a write operation on a bank of general-purpose I/O (GPIO) pins. |
| GPIO_WRITE_PINS_PARAMETERS The GPIO_WRITE_PINS_PARAMETERS structure describes a write operation on a group of general-purpose I/O (GPIO) pins. |
Enumerations
| CLIENT_CONTROLLER_QUERY_SET_REQUEST_TYPE The CLIENT_CONTROLLER_QUERY_SET_REQUEST_TYPE enumeration type indicates what type of attribute information the GPIO framework extension (GpioClx) is requesting from the GPIO controller driver. |
| GPIO_CONNECT_IO_PINS_MODE The GPIO_CONNECT_IO_PINS_MODE enumeration indicates whether a set of general-purpose I/O (GPIO) pins is configured as inputs or outputs. |