Edit

Share via

Touchscreen laptop system testing

  • Article

This topic describes tests for touchscreen laptop systems.

Onscreen keyboard deployment (touchscreen laptop systems only)

  1. Power up the system and go to the Start screen.

  2. Perform Touch keyboard deployment steps.

    Validation: The onscreen keyboard should not deploy.

  3. Rotate the system (Landscape to Portrait and back).

    Validation: Screen orientation should not change.

Docking station testing

Docking the system in slate mode (convertibles with docking system only)

  1. Have the GPIO docking system available (with a USB keyboard attached if the slate device has no keyboard). For distinguishing between docking and laptops/slate conversion, see Docking versus laptop slate conversion. For convertibles, configure the system in slate mode (see Slate/laptop mode conversion steps).

  2. Start with the system in slate mode and attach it to the docking system.

  3. Perform Touch keyboard deployment steps.

    Validation: The onscreen keyboard should deploy.

  4. Rotate the system (Landscape to Portrait and back).

    Validation: Screen orientation should not change.

Physical buttons testing

The system can expose the following set of buttons to the users:

  • Power button - required
  • Volume +/- buttons - required
  • Windows button - required
  • Rotation lock button - optional

Button behavior

  • For each of the buttons and button combinations that are listed in the following table, validate that the expected behavior occurs in all cases:

    Button or combination Press experience Press and hold experience
    Windows Navigate to Start Screen N/A
    Volume Up Increase volume Rapid volume increase
    Volume Down Decrease volume Rapid volume decrease
    Rotation Lock Rotation lock toggled N/A
    Power Power on Connected Standby

    Connected Standby systems

    • HoldTime<2s : enter CS
    • 2<=HoldTime<=10s : slide to power off UX
    • HoldTime>10s : power off

    Non-connected Standby systems

    • Holdtime< 4s :enter sleep [optional]
    • Holdtime>=4s :power off the device
    Windows + Volume Up Launch or exit Narrator N/A
    Windows + Volume Down Perform a screen capture N/A
    Windows + Power Secure attention sequence (Display lock screen) N/A