WLAN FIPS Association Tests - WPA2_PSK_PEAP_AES

This test suite validates that the WLAN adapter supports FIPS encryption mode.

Test details

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

• Device.Network additional documentation

Running the test

Before you run the test, complete the test setup as described in the test requirements: Wireless LAN (802.11) Testing Prerequisites.

This test suite performs the following actions:

• Enables FIPS on the Client machine.
• Configures two routers, that are named Router 0 and Router 1, as follows:
  • Router 0 - 2.4 GHz : WPA2PSK/AES [Preferred PHY N/Channel 6]
  • Router 0 - 5 GHz : WPA2PSK/AES [Preferred PHY A/Channel 36]
  • Router 1 - 2.4 GHz : WPA2Enterprise (PEAP-MSCHAPv2)/AES [Preferred PHY N/Channel 11]
  • Router 1 - 5 GHz : WPA2Enterprise (PEAP-MSCHAPv2)/AES [Preferred PHY A/Channel 157]
• Execute the BasicAssociation() test steps as described in WLAN Association Tests - Custom Configuration with FIPS mode enabled
• This test does not perform any power transition tests.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Wireless LAN (802.11) Tests.

More information

Parameters