Share via

Anisotropic

  • Article

This automated test measures the minimum supported Direct X renderer capability of a graphics adapter or chipset.

This topic applies to the following test jobs:

  • Anisotropic

  • Anisotropic (WoW64)

Test details

   
Specifications
  • Device.Graphics.AdapterRender.MinimumDirectXLevel
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
  • Windows 10, client editions (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 2
Category Compatibility
Timeout (in minutes) 120
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Graphic Adapter or Chipset Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Device.Graphics Testing.

More information

For an N-bit-per-component RGB frame buffer format, the lowest N bits must contain the blue component, the next N bits must contain the green component, the next N bits must contain the red component, and the remaining 32-(3 x N) bits may contain alpha. The resulting 32-bit value must be stored in memory in little-endian format.

Note

   This requirement is "If-Implemented" for Windows Server.

 

Command Syntax

Command option Description

Anisotropic.exe -M:1 -whql -logclean -dx9

Runs the Anisotropic test job.

Anisotropic.exe -M:1 -whql -logclean

Runs the Anisotropic (WoW64) test job.

Note

   For command line help for this test binary, type /h.

 

File List

File Location

Anisotropic.exe

<[testbinroot]>\nttest\

Configdisplay.exe

<[testbinroot]>\nttest\windowstest\tools

D3d10ref.dll

<[testbinroot]>\nttest\graphics\d3d\support\

D3d11ref.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\support\

D3dcompiler_test.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\support\

D3dref.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\support

D3dref8.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\support\

D3dref9.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\support\

d3dx10_test.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\support\

D3dx11_TEST.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\support\

D3dx8d.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\support\

D3dx9_TEST.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\support\

Fpstate.dll

<[testbinroot]>\nttest\windowstest\graphics\d3d\utility\

Modechange.exe

<[testbinroot]>\nttest\windowstest\graphics\d3d\utility\

TDRWatch.exe

<[testbinroot]>\nttest\windowstest\graphics\

Vbswap.x

<[testbinroot]>\nttest\windowstest\graphics\d3d\conf\

 

Parameters

Parameter name Parameter description
MONITOR Index of display output to target with test
MODIFIEDCMDLINE Additional command line arguments for test executable
LLU_NetAccessOnly LLU Name of net user
ConfigDisplayCommandLine Custom Command Line for ConfigDisplay. Default: logo
TDRArgs /get or /set