Share via

WGF11 D3DWDDM

  • Article

This automated test verifies that WDDM drivers expose the necessary DDIs as documented in the WDDM hardware functional spec. For example, the new D3D9 and/or D3D11.1 DDIs are supported on WDDM 1.2 drivers, but not on WDDM 1.0 or 1.1 drivers.

This test runs on all graphics devices with WDDM drivers.

Test details

   
Specifications
  • Device.Graphics.WDDM12.Render.Base
  • Device.Graphics.WDDM11.Render.Base
  • Device.Graphics.WDDM.Render.Base
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
  • Windows 10, client editions (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 1
Category Compatibility
Timeout (in minutes) 60
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Graphic Adapter or Chipset Testing Prerequisites.

Also, be sure to review the command line parameters; it is suggested that you always use -whql or -featurelevel:[X.Y] to avoid create device issues. The test always uses -whql when run from Windows Hardware Lab Kit (Windows HLK) Studio.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Device.Graphics Testing.

All test cases return PASS or FAIL. To review test details, review the test log from Windows Hardware Certification Kit (Windows HLK) Studio. The test might return SKIP, which you should consider to be PASS for the overall test if no WDDM render devices are present on the system. If the test does not detect WDDM render devices and the hardware does support them, a problem exists with the way that the specific device advertises itself.

More information

.

Command syntax

Command option Description

WGF11D3DWDDM

Without any options, the test's framework will attempt to create a D3D device at the highest possible feature level (currently feature level 11.1). If your device doesn't support this feature level the test will fail. Use either -featurelevel:[X.Y] or -whql to run the test. See -? for more details on command line usage.

-whql

This option specifies a WHLK (WHQL) mode where feature levels are enumerated. You should always use this option when running the test.

Note

   For command line help for this test binary, type /?.

 

File list

File Location

WGF11D3DWDDM.exe

<[testbinroot]>\nttest\windowstest\Graphics\D3D\conf

 

Parameters

Parameter name Parameter description
MODIFIEDCMDLINE Additional command line arguments for test executable
LLU_NetAccessOnly LLU Name of net user
ConfigDisplayCommandLine Custom Command Line for ConfigDisplay. Default: logo
TDRArgs /get or /set
WDKDeviceID Device id of DUT