Share via

WDDM ModeChange

  • Article

This automated test verifies system stability during display mode changes.

This test changes the display mode of all display outputs on the system and concurrently locks primary surfaces for use by the CPU. The test might put the system into rotated modes. Display drivers must not crash or stop responding (hang) while this test is running.

Test details

   
Specifications
  • Device.Graphics.WDDM.DisplayRender.Base
Platforms
  • Windows 10, client editions (x86)
  • Windows 10, client editions (x64)
  • Windows Server 2016 (x64)
  • Windows 10, client editions (Arm64)
Supported Releases
  • Windows 10
  • Windows 10, version 1511
  • Windows 10, version 1607
  • Windows 10, version 1703
  • Windows 10, version 1709
  • Windows 10, version 1803
  • Windows 10, version 1809
  • Windows 10, version 1903
  • Next update to Windows 10
Expected run time (in minutes) 120
Category Compatibility
Timeout (in minutes) 7200
Requires reboot false
Requires special configuration false
Type automatic

 

Additional documentation

Tests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):

Running the test

Before you run the test, complete the test setup as described in the test requirements: Graphic Adapter or Chipset Testing Prerequisites.

Troubleshooting

For generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures.

For troubleshooting information, see Troubleshooting Device.Graphics Testing.

More information

Command syntax

Command option Description

LDDMModeChange.exe

Runs the test job.

 

File list

File Location

Configdisplay.exe

<[testbinroot]>\nttest\windowstest\tools\

LDDMModeChange.exe

<[testbinroot]>\nttest\

TDRWatch.exe

<[testbinroot]>\nttest\windowstest\graphics\

 

Parameters

Parameter name Parameter description
LLU_NetAccessOnly LLU Name of net user
ConfigDisplayCommandLine Custom Command Line for ConfigDisplay. Default: logo
TDRArgs /get or /set
TopologyConfigSaveFile