| WPD_STILL_IMAGE_ARTIST |
VT_LPWSTR |
The name of the owner/user of the device. |
| WPD_STILL_IMAGE_BURST_INTERVAL |
VT_UI4 |
In a burst-mode image capture, the time delay between image captures, in milliseconds. |
| WPD_STILL_IMAGE_BURST_NUMBER |
VT_UI4 |
In a burst-mode image capture, the number of images to capture. |
| WPD_STILL_IMAGE_CAPTURE_DELAY |
VT_UI4 |
Specifies the time delay between the command to capture an image and the actual capture, in milliseconds. |
| WPD_STILL_IMAGE_CAPTURE_FORMAT |
VT_CLSID |
The format to use to capture the image. This is one of the format GUID values that is defined by Windows Portable Devices. |
| WPD_STILL_IMAGE_CAPTURE_MODE |
VT_UI4 |
A WPD_CAPTURE_MODES enumerator that specifies the capture mode to use to capture an image. |
| WPD_STILL_IMAGE_CAPTURE_RESOLUTION |
VT_LPWSTR |
A string that specifies the image size to capture. The image size is specified in pixels, in the format "widthxheight". For example: "800x600". |
| WPD_STILL_IMAGE_COMPRESSION_SETTING |
VT_UI8 |
Describes the image compression settings that are used when capturing an image. This is device-specific. |
| WPD_STILL_IMAGE_CONTRAST |
VT_UI4 |
A number that specifies the contrast setting to apply when capturing an image, with zero being the least contrast and larger numbers indicating greater contrast. |
| WPD_STILL_IMAGE_DIGITAL_ZOOM |
VT_UI4 |
A number that specifies the amount of digital zoom to use when capturing an image. The number is 1 or higher, scaled by a factor of 10. A value of 1 (representing 10) indicates no digital zoom; a value of 2 (representing 20) indicates a 2x zoom (1/4 of the image seen by a 1x zoom will be captured). |
| WPD_STILL_IMAGE_EFFECT_MODE |
VT_UI4 |
A WPD_EFFECT_MODES enumerator that specifies an image effect to use when capturing an image. |
| WPD_STILL_IMAGE_EXPOSURE_BIAS_COMPENSATION |
VT_UI4 |
A number that specifies the APEX units to adjust the exposure. Units are stops x 1,000. Specifying zero indicates the factory default. |
| WPD_STILL_IMAGE_EXPOSURE_INDEX |
VT_UI4 |
A number that specifies the ISO film speed to emulate when capturing an image. A value of 0xFFFF indicates that this value should be set automatically. |
| WPD_STILL_IMAGE_EXPOSURE_METERING_MODE |
VT_UI4 |
A WPD_EXPOSURE_METERING_MODES enumerator that specifies the metering mode to use when capturing an image. |
| WPD_STILL_IMAGE_EXPOSURE_PROGRAM_MODE |
VT_UI4 |
A WPD_EXPOSURE_PROGRAM_MODES enumerator that specifies the exposure program to use when capturing an image. |
| WPD_STILL_IMAGE_EXPOSURE_TIME |
VT_UI4 |
The shutter speed to use when capturing an image, in seconds x 10,000. |
| WPD_STILL_IMAGE_FLASH_MODE |
VT_UI4 |
A WPD_FLASH_MODES enumerator that specifies the flash mode to use when capturing an image. |
| WPD_STILL_IMAGE_FNUMBER |
VT_UI4 |
A number that specifies the aperture of the lens when capturing an image. The number is the f-stop number 100 (so 14 would indicate f/1.4).This property is typically only valid when WPD_STILL_IMAGE_EXPOSURE_PROGRAM_MODE is set to manual or aperture priority.
|
| WPD_STILL_IMAGE_FOCAL_LENGTH |
VT_UI4 |
The focal length, in millimeters x 100, to use when capturing an image. So, for example, 35mm would be 3500. |
| WPD_STILL_IMAGE_FOCUS_DISTANCE |
VT_UI4 |
The focus distance that a device should use, in millimeters. A value of 0xFFFF indicates infinite focus (more than 655 meters). |
| WPD_STILL_IMAGE_FOCUS_METERING_MODE |
VT_UI4 |
A WPD_FOCUS_METERING_MODES enumerator that specifies which focus mode an image capture device should use when deciding how to focus on a subject. |
| WPD_STILL_IMAGE_FOCUS_MODE |
VT_UI4 |
A WPD_FOCUS_MODES enumerator that specifies the focus mode to use when capturing an image. |
| WPD_STILL_IMAGE_RGB_GAIN |
VT_LPWSTR |
A null-terminated string that specifies the RGB gain to use when capturing an image. The string is three colon-delimited numbers with no intervening spaces, in the format "R:G:B". |
| WPD_STILL_IMAGE_SHARPNESS |
VT_UI4 |
A number that specifies the sharpness to use when capturing an image, where zero is the least sharp and larger numbers indicate increasing sharpness. |
| WPD_STILL_IMAGE_TIMELAPSE_INTERVAL |
VT_UI4 |
The time delay between image captures in a time-lapse image capture, in milliseconds. |
| WPD_STILL_IMAGE_TIMELAPSE_NUMBER |
VT_UI4 |
The number of images to capture in a time-lapse mode image capture. |
| WPD_STILL_IMAGE_UPLOAD_URL |
VT_LPWSTR |
Specifies a URL where the device should send the image after it is captured. |
| WPD_STILL_IMAGE_WHITE_BALANCE |
VT_UI4 |
A WPD_WHITE_BALANCE_SETTINGS enumerated value that specifies the white balance settings to use when capturing an image. |