WifiManager Class

A constructor used when creating managed representations of JNI objects; called by the runtime.

Activity Action: Pick a Wi-Fi network to connect to.

If one of the removed suggestions is currently connected, trigger an immediate disconnect after suggestions removal

If one of the removed suggestions is currently connected, that network will be disconnected after a short delay as opposed to immediately (which will be done by #ACTION_REMOVE_SUGGESTION_DISCONNECT).

Activity Action: Show a system activity that allows the user to enable scans to be available even with Wi-Fi turned off.

Directed broadcast intent action indicating that the device has connected to one of the network suggestions provided by the app.

Broadcast intent action indicating whether Wi-Fi scanning is currently available.

The bundle key string for the channel frequency in MHz.

The bundle key for the number of APs found on the corresponding channel specified by WifiManager#CHANNEL_DATA_KEY_FREQUENCY_MHZ.

The error code if there was a problem authenticating.

The lookup key for a String giving the BSSID of the access point to which we are connected.

The lookup key for a android.net.NetworkInfo object associated with the Wi-Fi network.

Sent as as a part of #ACTION_WIFI_NETWORK_SUGGESTION_POST_CONNECTION that holds an instance of WifiNetworkSuggestion corresponding to the connected network.

The lookup key for an int giving the new RSSI in dBm.

The lookup key for a SupplicantState describing the new state Retrieve with android.content.Intent#getParcelableExtra(String).

The previous Wi-Fi state.

Lookup key for a boolean extra in intent #SCAN_RESULTS_AVAILABLE_ACTION representing if the scan was successful or not.

A boolean extra indicating whether scanning is currently available.

The lookup key for a boolean that indicates whether a connection to the supplicant daemon has been gained or lost.

The lookup key for a SupplicantState describing the supplicant error code if any Retrieve with android.content.Intent#getIntExtra(String, int).

The lookup key for a android.net.wifi.WifiInfo object giving the information about the access point to which we are connected.

The lookup key for an int that indicates whether Wi-Fi is enabled, disabled, enabling, disabling, or unknown.

Do not send the DHCP hostname to open networks.

Do not send the DHCP hostname to secure network.

The network IDs of the configured networks could have changed.

Broadcast intent action indicating that the state of Wi-Fi connectivity has changed.

Allows the device to roam more quickly than the normal roaming mode.

Roaming is disabled.

Chipset has roaming trigger capability based on the score calculated using multiple parameters.

The RSSI (signal strength) has changed.

An access point scan has completed, and results are available.

Reason code if local-only network connection attempt failed with association failure.

Reason code if local-only network connection attempt failed with an authentication failure.

Reason code if local-only network connection attempt failed with an IP provisioning failure.

Reason code if local-only network connection attempt failed with AP not responding

Reason code if local-only network connection attempt failed with AP not in range.

Reason code if local-only network connection attempt failed with an unknown failure.

Reason code if one or more of the network suggestions added already exists in platform's database.

Reason code if the number of network suggestions provided by the app crosses the max threshold set per app.

Reason code if one or more of the network suggestions added is invalid.

Reason code if one or more of the network suggestions added is not allowed.

Reason code if the user has disallowed "android:change_wifi_state" app-ops from the app.

Reason code if there was an internal error in the platform while processing the addition or removal of suggestions.

Reason code if one or more of the network suggestions removed does not exist in platform's database.

Reason code if android.os.UserManager#DISALLOW_ADD_WIFI_CONFIG user restriction is set and calling app is restricted by device admin.

Reason code if all of the network suggestions were successfully added or removed.

Status code if the calling app was approved by virtue of being a carrier privileged app.

Status code if the calling app got the user approval for suggestions.

Status code if the calling app is still pending user approval for suggestions.

Status code if the calling app suggestions were rejected by the user.

Status code if suggestion approval status is unknown, an App which hasn't made any suggestions will get this code.

Reason code if suggested network connection attempt failed with association failure.

Reason code if suggested network connection attempt failed with an authentication failure.

Reason code if suggested network connection attempt failed with an IP provision failure.

Reason code if suggested network connection attempt failed with an unknown failure.

Broadcast intent action indicating that a connection to the supplicant has been established (and it is now possible to perform Wi-Fi operations) or the connection to the supplicant has been lost.

Broadcast intent action indicating that the state of establishing a connection to an access point has changed.

Indicates an invalid SSID.

Wi-Fi interface of type AP (access point Wi-Fi infrastructure device).

Wi-Fi interface of type Wi-Fi Aware (aka NAN).

Wi-Fi interface of type Wi-Fi Direct (aka P2P).

Wi-Fi interface of type STA (station/client Wi-Fi infrastructure device).

Wi-Fi simultaneous connection to multiple internet-providing Wi-FI networks (APs) is enabled and restricted to a single network on different bands (e.

Wi-Fi simultaneous connection to multiple internet-providing Wi-Fi networks (APs) is disabled.

Wi-Fi simultaneous connection to multiple internet-providing Wi-Fi networks (APs) is enabled.

Broadcast intent action indicating that Wi-Fi has been enabled, disabled, enabling, disabling, or unknown.

Return a list of all the networks previously configured by the calling app.

Returns the runtime class of this Object.

Return a list of all the networks configured for the current foreground user.

Return dynamic information about the current Wi-Fi connection, if any is active.

Return the DHCP-assigned addresses from the last successful DHCP request, if any.

The handle to the underlying Android instance.

Get the persisted Wi-Fi auto wakeup feature state.

Query whether or not the device supports multiple Access point (AP) which are bridged together.

This member is deprecated.

Wi-Fi Easy Connect DPP AKM enables provisioning and configuration of Wi-Fi devices without the need of using the device PSK passphrase.

Wi-Fi Easy Connect (DPP) introduces standardized mechanisms to simplify the provisioning and configuration of Wi-Fi devices.

Query whether or not the device supports concurrent station (STA) connections for make-before-break wifi to wifi switching.

Check if scanning is always available.

Get the persisted Wi-Fi scan throttle state.

Query whether or not the device supports Station (STA) + Access point (AP) concurrency.

Query whether or not the device supports concurrency of Station (STA) + multiple access points (AP) (where the APs bridged together).

Query whether or not the device supports concurrent station (STA) connections for local-only connections using WifiNetworkSpecifier.

Query whether or not the device supports concurrent station (STA) connections for multi internet connections.

Indicate that whether or not settings required TLS minimum version is supported.

Indicate that whether or not TLS v1.

Return whether Wi-Fi is enabled or disabled.

If the device supports Wi-Fi Passpoint, the user can explicitly enable or disable it.

Returns the max number of channels that is allowed to be set on a WifiNetworkSpecifier.

Returns the max number of network suggestions that are allowed per app on the device.

Get the system default maximum signal level.

Get all network suggestions provided by the calling app.

Return the list of installed Passpoint configurations added by the caller.

Return the results of the latest access point scan.

The device may support concurrent connections to multiple internet-providing Wi-Fi networks (APs) - that is indicated by WifiManager#isStaConcurrencyForMultiInternetSupported().

This API supports the Mono for Android infrastructure and is not intended to be used directly from your code.

This API supports the Mono for Android infrastructure and is not intended to be used directly from your code.

Gets the Wi-Fi enabled state.

Add a new network description to the set of configured networks.

Provide a list of network suggestions to the device.

Add or update a Passpoint configuration.

Control whether the device will automatically search for and connect to Wi-Fi networks - auto-join Wi-Fi networks.

Calculates the level of the signal.

Given a raw RSSI, return the RSSI signal quality rating using the system default RSSI quality rating thresholds.

Cancel any ongoing Wi-fi Protected Setup

Creates and returns a copy of this object.

Compares two signal strengths.

Create a new MulticastLock

Creates a new WifiLock.

Creates a new WifiLock.

Disable a configured network.

Disassociate from the currently active access point.

Allow a previously configured network to be associated with.

Indicates whether some other object is "equal to" this one.

Flush Passpoint ANQP cache, and clear pending ANQP requests.

Returns a list of WifiAvailableChannel for the specified band and operational mode(s), that is allowed for the current regulatory domain.

Get channel data such as the number of APs found on each channel from the most recent scan.

Returns a hash code value for the object.

Return the maximum number of concurrent TDLS sessions supported by the device.

Return the number of currently enabled TDLS sessions.

This API allows a privileged application to get roaming mode policies configured using the #setPerSsidRoamingMode(WifiSsid, int).

Returns a list of WifiAvailableChannel for the specified band and operational mode(s) per the current regulatory domain and device-specific constraints such as concurrency state and interference due to other radios.

Check if the chipset supports 2.

Check if the chipset supports 5GHz band.

Check if the chipset supports the 60GHz frequency band.

Check if the chipset supports 6GHz band.

Get the carrier network offload state for merged or unmerged networks for specified subscription.

Check if a TDLS session can be established at this time via #setTdlsEnabled(InetAddress, boolean) or #setTdlsEnabledWithMacAddress(String, boolean) or #setTdlsEnabled(InetAddress, boolean, Executor, Consumer) or #setTdlsEnabledWithMacAddress(String, boolean, Executor, Consumer)

        Internally framework checks the STA connected state, device support for TDLS and
        the number of TDLS sessions available in driver/firmware.

Check if the chipset supports a certain Wi-Fi standard.

Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.

Wakes up a single thread that is waiting on this object's monitor.

Wakes up all threads that are waiting on this object's monitor.

Check that the supplicant daemon is responding to requests.

Query whether or not auto-join global is enabled/disabled

Query the global restriction on which networks to send the device hostname to during DHCP.

Reconnect to the currently active access point, even if we are already connected.

Reconnect to the currently active access point, if we are currently disconnected.

Remove the specified network from the list of configured networks.

Remove some or all of the network suggestions that were previously provided by the app.

Remove some or all of the network suggestions that were previously provided by the app.

Remove all configured networks that were not created by the calling app.

Remove the Passpoint configuration identified by its FQDN (Fully Qualified Domain Name) added by the caller.

This API allows a privileged application to remove roaming mode policy configured using the #setPerSsidRoamingMode(WifiSsid, int).

Queries the framework to determine whether the specified interface can be created, and if so - what other interfaces would be torn down by the framework to allow this creation if it were requested.

Tell the device to persist the current list of configured networks.

Sets the Handle property.

This API allows a privileged application to set roaming mode per SSID.

Sets the global restrictions on which networks to send the device hostname to during DHCP.

Enable/Disable TDLS on a specific local route.

Enable/Disable TDLS on a specific local route.

Enable/Disable TDLS with a specific peer Mac Address.

Similar to #setTdlsEnabled(InetAddress, boolean) , except this version allows you to specify remote endpoint with a MAC address.

Enable or disable Wi-Fi.

Request a scan for access points.

Start Wi-fi Protected Setup

Returns a string representation of the object.

Update the network description of an existing configured network.

Check if input configuration is valid.

Causes the current thread to wait until it is awakened, typically by being <em>notified</em> or <em>interrupted</em>.

Causes the current thread to wait until it is awakened, typically by being <em>notified</em> or <em>interrupted</em>, or until a certain amount of real time has elapsed.

Causes the current thread to wait until it is awakened, typically by being <em>notified</em> or <em>interrupted</em>, or until a certain amount of real time has elapsed.

Performs an Android runtime-checked type conversion.

Gets the JNI name of the type of the instance self.

Try to coerce self to type TResult, checking that the coercion is valid on the Java side.

Try to coerce self to type TResult, checking that the coercion is valid on the Java side.