Procédure : utiliser la protection des données

.NET fournit l’accès à l’API de protection des données (DPAPI), qui permet de chiffrer des données à l’aide des informations de compte de l’utilisateur ou de l’ordinateur actuel. Quand vous utilisez l'API de protection des données, vous simplifiez le processus de génération et de stockage explicites de la clé de chiffrement.

Utilisez la classe ProtectedData pour chiffrer une copie d'un tableau d'octets. Vous pouvez spécifier que les données chiffrées par le compte d'utilisateur actuel peuvent être déchiffrées uniquement par le même compte d'utilisateur, ou bien par n'importe quel compte de l'ordinateur. Reportez-vous à l'énumération DataProtectionScope pour obtenir une description détaillée des options ProtectedData.

Chiffrer les données d’un fichier ou d’un flux à l’aide de la protection des données

1. Créez une entropie aléatoire.

2. Appelez la méthode statique Protect en passant un tableau d'octets à chiffrer, l'entropie et la portée de protection des données.

3. Écrivez les données chiffrées dans un fichier ou un flux.

Pour déchiffrer les données à partir d'un fichier ou d'un flux à l'aide de la protection des données

1. Lisez les données chiffrées à partir d'un fichier ou d'un flux.

2. Appelez la méthode statique Unprotect en passant un tableau d'octets à déchiffrer et la portée de protection des données.

Exemple

L'exemple de code suivant montre deux formes de chiffrement et de déchiffrement. Tout d'abord, l'exemple de code chiffre et déchiffre un tableau d'octets en mémoire. Ensuite, l'exemple de code chiffre une copie d'un tableau d'octets, l'enregistre dans un fichier, charge les données à partir du fichier, puis déchiffre les données. L'exemple affiche les données d'origine, les données chiffrées et les données déchiffrées.

using System;
using System.IO;
using System.Text;
using System.Security.Cryptography;

public class MemoryProtectionSample
{
    public static void Main() => Run();

    public static void Run()
    {
        try
        {
            ///////////////////////////////
            //
            // Memory Encryption - ProtectedMemory
            //
            ///////////////////////////////

            // Create the original data to be encrypted (The data length should be a multiple of 16).
            byte[] toEncrypt = UnicodeEncoding.ASCII.GetBytes("ThisIsSomeData16");

            Console.WriteLine($"Original data: {UnicodeEncoding.ASCII.GetString(toEncrypt)}");
            Console.WriteLine("Encrypting...");

            // Encrypt the data in memory.
            EncryptInMemoryData(toEncrypt, MemoryProtectionScope.SameLogon);

            Console.WriteLine($"Encrypted data: {UnicodeEncoding.ASCII.GetString(toEncrypt)}");
            Console.WriteLine("Decrypting...");

            // Decrypt the data in memory.
            DecryptInMemoryData(toEncrypt, MemoryProtectionScope.SameLogon);

            Console.WriteLine($"Decrypted data: {UnicodeEncoding.ASCII.GetString(toEncrypt)}");

            ///////////////////////////////
            //
            // Data Encryption - ProtectedData
            //
            ///////////////////////////////

            // Create the original data to be encrypted
            toEncrypt = UnicodeEncoding.ASCII.GetBytes("This is some data of any length.");

            // Create a file.
            FileStream fStream = new FileStream("Data.dat", FileMode.OpenOrCreate);

            // Create some random entropy.
            byte[] entropy = CreateRandomEntropy();

            Console.WriteLine();
            Console.WriteLine($"Original data: {UnicodeEncoding.ASCII.GetString(toEncrypt)}");
            Console.WriteLine("Encrypting and writing to disk...");

            // Encrypt a copy of the data to the stream.
            int bytesWritten = EncryptDataToStream(toEncrypt, entropy, DataProtectionScope.CurrentUser, fStream);

            fStream.Close();

            Console.WriteLine("Reading data from disk and decrypting...");

            // Open the file.
            fStream = new FileStream("Data.dat", FileMode.Open);

            // Read from the stream and decrypt the data.
            byte[] decryptData = DecryptDataFromStream(entropy, DataProtectionScope.CurrentUser, fStream, bytesWritten);

            fStream.Close();

            Console.WriteLine($"Decrypted data: {UnicodeEncoding.ASCII.GetString(decryptData)}");
        }
        catch (Exception e)
        {
            Console.WriteLine($"ERROR: {e.Message}");
        }
    }

    public static void EncryptInMemoryData(byte[] Buffer, MemoryProtectionScope Scope )
    {
        if (Buffer == null)
            throw new ArgumentNullException(nameof(Buffer));
        if (Buffer.Length <= 0)
            throw new ArgumentException("The buffer length was 0.", nameof(Buffer));

        // Encrypt the data in memory. The result is stored in the same array as the original data.
        ProtectedMemory.Protect(Buffer, Scope);
    }

    public static void DecryptInMemoryData(byte[] Buffer, MemoryProtectionScope Scope)
    {
        if (Buffer == null)
            throw new ArgumentNullException(nameof(Buffer));
        if (Buffer.Length <= 0)
            throw new ArgumentException("The buffer length was 0.", nameof(Buffer));

        // Decrypt the data in memory. The result is stored in the same array as the original data.
        ProtectedMemory.Unprotect(Buffer, Scope);
    }

    public static byte[] CreateRandomEntropy()
    {
        // Create a byte array to hold the random value.
        byte[] entropy = new byte[16];

        // Create a new instance of the RNGCryptoServiceProvider.
        // Fill the array with a random value.
        new RNGCryptoServiceProvider().GetBytes(entropy);

        // Return the array.
        return entropy;
    }

    public static int EncryptDataToStream(byte[] Buffer, byte[] Entropy, DataProtectionScope Scope, Stream S)
    {
        if (Buffer == null)
            throw new ArgumentNullException(nameof(Buffer));
        if (Buffer.Length <= 0)
            throw new ArgumentException("The buffer length was 0.", nameof(Buffer));
        if (Entropy == null)
            throw new ArgumentNullException(nameof(Entropy));
        if (Entropy.Length <= 0)
            throw new ArgumentException("The entropy length was 0.", nameof(Entropy));
        if (S == null)
            throw new ArgumentNullException(nameof(S));

        int length = 0;

        // Encrypt the data and store the result in a new byte array. The original data remains unchanged.
        byte[] encryptedData = ProtectedData.Protect(Buffer, Entropy, Scope);

        // Write the encrypted data to a stream.
        if (S.CanWrite && encryptedData != null)
        {
            S.Write(encryptedData, 0, encryptedData.Length);

            length = encryptedData.Length;
        }

        // Return the length that was written to the stream.
        return length;
    }

    public static byte[] DecryptDataFromStream(byte[] Entropy, DataProtectionScope Scope, Stream S, int Length)
    {
        if (S == null)
            throw new ArgumentNullException(nameof(S));
        if (Length <= 0 )
            throw new ArgumentException("The given length was 0.", nameof(Length));
        if (Entropy == null)
            throw new ArgumentNullException(nameof(Entropy));
        if (Entropy.Length <= 0)
            throw new ArgumentException("The entropy length was 0.", nameof(Entropy));

        byte[] inBuffer = new byte[Length];
        byte[] outBuffer;

        // Read the encrypted data from a stream.
        if (S.CanRead)
        {
            S.Read(inBuffer, 0, Length);

            outBuffer = ProtectedData.Unprotect(inBuffer, Entropy, Scope);
        }
        else
        {
            throw new IOException("Could not read the stream.");
        }

        // Return the decrypted data
        return outBuffer;
    }
}

Imports System.IO
Imports System.Text
Imports System.Security.Cryptography



Public Module MemoryProtectionSample

    Sub Main()
        Run()

    End Sub


    Sub Run()
        Try

            ''''''''''''''''''''''''''''''''''''
            '
            ' Memory Encryption - ProtectedMemory
            '
            ''''''''''''''''''''''''''''''''''''
            ' Create the original data to be encrypted (The data length should be a multiple of 16).
            Dim toEncrypt As Byte() = UnicodeEncoding.ASCII.GetBytes("ThisIsSomeData16")

            Console.WriteLine("Original data: " + UnicodeEncoding.ASCII.GetString(toEncrypt))
            Console.WriteLine("Encrypting...")

            ' Encrypt the data in memory.
            EncryptInMemoryData(toEncrypt, MemoryProtectionScope.SameLogon)

            Console.WriteLine("Encrypted data: " + UnicodeEncoding.ASCII.GetString(toEncrypt))
            Console.WriteLine("Decrypting...")

            ' Decrypt the data in memory.
            DecryptInMemoryData(toEncrypt, MemoryProtectionScope.SameLogon)

            Console.WriteLine("Decrypted data: " + UnicodeEncoding.ASCII.GetString(toEncrypt))


            ''''''''''''''''''''''''''''''''''''
            '
            ' Data Encryption - ProtectedData
            '
            ''''''''''''''''''''''''''''''''''''
            ' Create the original data to be encrypted
            toEncrypt = UnicodeEncoding.ASCII.GetBytes("This is some data of any length.")

            ' Create a file.
            Dim fStream As New FileStream("Data.dat", FileMode.OpenOrCreate)

            ' Create some random entropy.
            Dim entropy As Byte() = CreateRandomEntropy()

            Console.WriteLine()
            Console.WriteLine("Original data: " + UnicodeEncoding.ASCII.GetString(toEncrypt))
            Console.WriteLine("Encrypting and writing to disk...")

            ' Encrypt a copy of the data to the stream.
            Dim bytesWritten As Integer = EncryptDataToStream(toEncrypt, entropy, DataProtectionScope.CurrentUser, fStream)

            fStream.Close()

            Console.WriteLine("Reading data from disk and decrypting...")

            ' Open the file.
            fStream = New FileStream("Data.dat", FileMode.Open)

            ' Read from the stream and decrypt the data.
            Dim decryptData As Byte() = DecryptDataFromStream(entropy, DataProtectionScope.CurrentUser, fStream, bytesWritten)

            fStream.Close()

            Console.WriteLine("Decrypted data: " + UnicodeEncoding.ASCII.GetString(decryptData))


        Catch e As Exception
            Console.WriteLine("ERROR: " + e.Message)
        End Try

    End Sub



    Sub EncryptInMemoryData(ByVal Buffer() As Byte, ByVal Scope As MemoryProtectionScope)
        If Buffer Is Nothing Then
            Throw New ArgumentNullException("Buffer")
        End If
        If Buffer.Length <= 0 Then
            Throw New ArgumentException("Buffer")
        End If

        ' Encrypt the data in memory. The result is stored in the same array as the original data.
        ProtectedMemory.Protect(Buffer, Scope)

    End Sub


    Sub DecryptInMemoryData(ByVal Buffer() As Byte, ByVal Scope As MemoryProtectionScope)
        If Buffer Is Nothing Then
            Throw New ArgumentNullException("Buffer")
        End If
        If Buffer.Length <= 0 Then
            Throw New ArgumentException("Buffer")
        End If

        ' Decrypt the data in memory. The result is stored in the same array as the original data.
        ProtectedMemory.Unprotect(Buffer, Scope)

    End Sub


    Function CreateRandomEntropy() As Byte()
        ' Create a byte array to hold the random value.
        Dim entropy(15) As Byte

        ' Create a new instance of the RNGCryptoServiceProvider.
        ' Fill the array with a random value.
        Dim RNG As New RNGCryptoServiceProvider()

        RNG.GetBytes(entropy)

        ' Return the array.
        Return entropy

    End Function 'CreateRandomEntropy



    Function EncryptDataToStream(ByVal Buffer() As Byte, ByVal Entropy() As Byte, ByVal Scope As DataProtectionScope, ByVal S As Stream) As Integer
        If Buffer Is Nothing Then
            Throw New ArgumentNullException("Buffer")
        End If
        If Buffer.Length <= 0 Then
            Throw New ArgumentException("Buffer")
        End If
        If Entropy Is Nothing Then
            Throw New ArgumentNullException("Entropy")
        End If
        If Entropy.Length <= 0 Then
            Throw New ArgumentException("Entropy")
        End If
        If S Is Nothing Then
            Throw New ArgumentNullException("S")
        End If
        Dim length As Integer = 0

        ' Encrypt the data and store the result in a new byte array. The original data remains unchanged.
        Dim encryptedData As Byte() = ProtectedData.Protect(Buffer, Entropy, Scope)

        ' Write the encrypted data to a stream.
        If S.CanWrite AndAlso Not (encryptedData Is Nothing) Then
            S.Write(encryptedData, 0, encryptedData.Length)

            length = encryptedData.Length
        End If

        ' Return the length that was written to the stream. 
        Return length

    End Function 'EncryptDataToStream


    Function DecryptDataFromStream(ByVal Entropy() As Byte, ByVal Scope As DataProtectionScope, ByVal S As Stream, ByVal Length As Integer) As Byte()
        If S Is Nothing Then
            Throw New ArgumentNullException("S")
        End If
        If Length <= 0 Then
            Throw New ArgumentException("Length")
        End If
        If Entropy Is Nothing Then
            Throw New ArgumentNullException("Entropy")
        End If
        If Entropy.Length <= 0 Then
            Throw New ArgumentException("Entropy")
        End If


        Dim inBuffer(Length - 1) As Byte
        Dim outBuffer() As Byte

        ' Read the encrypted data from a stream.
        If S.CanRead Then
            S.Read(inBuffer, 0, Length)

            outBuffer = ProtectedData.Unprotect(inBuffer, Entropy, Scope)
        Else
            Throw New IOException("Could not read the stream.")
        End If

        ' Return the unencrypted data as byte array. 
        Return outBuffer

    End Function 'DecryptDataFromStream 
End Module 'MemoryProtectionSample

Compilation du code

Cet exemple compile et s’exécute uniquement lors du ciblage de .NET Framework et de l’exécution sur Windows.

• Incluez une référence à System.Security.dll.

• Incluez les espaces de noms System, System.IO, System.Security.Cryptography et System.Text.

Voir aussi

• Modèle de chiffrement
• services de chiffrement
• Chiffrement multiplateforme
• ProtectedMemory
• ProtectedData
• Protection des données ASP.NET Core