Office.Document interface

Obtient un objet qui fournit l’accès aux liaisons définies dans le document.

bindings: Bindings;

Valeur de propriété

Remarques

Vous n’instanciez pas l’objet Document directement dans votre script. Pour appeler des membres de l’objet Document afin d’interagir avec le document actif ou la feuille de calcul active, utilisez Office.context.document dans votre script.

Exemples

function displayAllBindings() {
    Office.context.document.bindings.getAllAsync(function (asyncResult) {
        let bindingString = '';
        for (let i in asyncResult.value) {
            bindingString += asyncResult.value[i].id + '\n';
        }
        write('Existing bindings: ' + bindingString);
    });
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

Obtient un objet qui représente les parties XML personnalisées contenues dans le document.

customXmlParts: CustomXmlParts;

Valeur de propriété

Exemples

function getCustomXmlParts(){
    Office.context.document.customXmlParts.getByNamespaceAsync('http://tempuri.org', function (asyncResult) {
        write('Retrieved ' + asyncResult.value.length + ' custom XML parts');
    });
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

Obtient le mode dans lequel se trouve le document.

mode: DocumentMode;

Valeur de propriété

Exemples

function displayDocumentMode() {
    write(Office.context.document.mode);
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

// The following example initializes the add-in and then gets properties of the
// Document object that are available in the context of a Project document.
// A Project document is the opened, active project. To access members of the
// ProjectDocument object, use the Office.context.document object as shown in
// the code examples for ProjectDocument methods and events.
// The example assumes your add-in has a reference to the jQuery library and
// that the following page control is defined in the content div in the page body:
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // Get information about the document.
            showDocumentProperties();
        });
    };

    // Get the document mode and the URL of the active project.
    function showDocumentProperties() {
        const output = String.format(
            'The document mode is {0}.<br/>The URL of the active project is {1}.',
            Office.context.document.mode,
            Office.context.document.url);
        $('#message').html(output);
    }
})();

Obtient un objet qui représente les paramètres personnalisés enregistrés du complément de contenu ou de volet des tâches pour le document actif.

settings: Settings;

Valeur de propriété

Obtient l’URL du document actuellement ouvert par l’application Office. Retourne null si l’URL n’est pas disponible.

url: string;

Valeur de propriété

Exemples

function displayDocumentUrl() {
    write(Office.context.document.url);
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

Ajoute un gestionnaire d’événements pour un événement d’objet Document.

addHandlerAsync(eventType: Office.EventType, handler: any, options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Remarques

Ensemble de conditions requises : DocumentEvents

Vous pouvez ajouter plusieurs gestionnaires d’événements pour le eventType spécifié tant que le nom de chaque fonction de gestionnaire d’événements est unique.

Ajoute un gestionnaire d’événements pour un événement d’objet Document.

addHandlerAsync(eventType: Office.EventType, handler: any, callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Remarques

Ensemble de conditions requises : DocumentEvents

Vous pouvez ajouter plusieurs gestionnaires d’événements pour le eventType spécifié tant que le nom de chaque fonction de gestionnaire d’événements est unique.

Exemples

// The following example adds an event handler for the SelectionChanged event of a document
function addSelectionChangedEventHandler() {
    Office.context.document.addHandlerAsync(Office.EventType.DocumentSelectionChanged, MyHandler);
}

function MyHandler(eventArgs) {
    write('Event raised: ' + eventArgs.type);
    doSomethingWithDocument(eventArgs.document);
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

// The following code example adds a handler for the ResourceSelectionChanged event.
// When the resource selection changes in the document, it gets the GUID of the selected resource.
// The example assumes your add-in has a reference to the jQuery library and that the
// following page control is defined in the content div in the page body:
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            Office.context.document.addHandlerAsync(
                Office.EventType.ResourceSelectionChanged,
                getResourceGuid);
        });
    };

    // Get the GUID of the selected resource and display it in the add-in.
    function getResourceGuid() {
        Office.context.document.getSelectedResourceAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    $('#message').html(result.value);
                }
            }
        );
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

// For a complete code sample that shows how to use a ResourceSelectionChanged
// event handler in a Project add-in, see "Create your first task pane add-in for Microsoft Project".
// https://learn.microsoft.com/office/dev/add-ins/project/create-your-first-task-pane-add-in-for-project-by-using-a-text-editor

// The following code example adds a handler for the TaskSelectionChanged event.
// When the task selection changes in the document, it gets the GUID of the
// selected task.
// The example assumes your add-in has a reference to the jQuery library and that
// the following page control is defined in the content div in the page body:
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            Office.context.document.addHandlerAsync(
                Office.EventType.TaskSelectionChanged,
                getTaskGuid);
            getTaskGuid();
        });
    };

    // Get the GUID of the selected task and display it in the add-in.
    function getTaskGuid() {
        Office.context.document.getSelectedTaskAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    $('#message').html(result.value);
                }
            }
        );
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

// The following code example adds a handler for the ViewSelectionChanged
// event. When the active view changes, it gets the name and type of the active view.
// The example assumes your add-in has a reference to the jQuery library and that
// the following page control is defined in the content div in the page body:
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            Office.context.document.addHandlerAsync(
                Office.EventType.ViewSelectionChanged,
                getActiveView);
            getActiveView();
        });
    };

    // Get the name and type of the active view and display it in the add-in.
    function getActiveView() {
        Office.context.document.getSelectedViewAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    const output = String.format(
                        'View name: {0}<br/>View type: {1}',
                        result.value.viewName, result.value.viewType);
                    $('#message').html(output);
                }
            }
        );
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

// For an example that shows how to use a ViewSelectionChanged event handler in a
// Project add-in, see "Create your first task pane add-in for Microsoft Project".
// https://learn.microsoft.com/office/dev/add-ins/project/create-your-first-task-pane-add-in-for-project-by-using-a-text-editor

// The following code example uses addHandlerAsync to add an event handler for the ViewSelectionChanged event.
// When the active view changes, the handler checks the view type. It enables a button if the view is a resource
// view and disables the button if it isn't a resource view. Choosing the button gets the GUID of the selected
// resource and displays it in the add-in.
// The example assumes that your add-in has a reference to the jQuery library and that the following page controls
// are defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" disabled="disabled" /><br />
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            // Add a ViewSelectionChanged event handler.
            Office.context.document.addHandlerAsync(
                Office.EventType.ViewSelectionChanged,
                getActiveView);
            $('#get-info').on("click", getResourceGuid);

            // This example calls the handler on page load to get the active view
            // of the default page.
            getActiveView();
        });
    };

    // Activate the button based on the active view type of the document.
    // This is the ViewSelectionChanged event handler.
    function getActiveView() {
        Office.context.document.getSelectedViewAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    const viewType = result.value.viewType;
                    if (viewType == 6 ||   // ResourceForm
                        viewType == 7 ||   // ResourceSheet
                        viewType == 8 ||   // ResourceGraph
                        viewType == 15) {  // ResourceUsage
                        $('#get-info').removeAttr('disabled');
                    }
                    else {
                        $('#get-info').attr('disabled', 'disabled');
                    }
                    const output = String.format(
                        'View name: {0}<br/>View type: {1}',
                        result.value.viewName, viewType);
                    $('#message').html(output);
                }
            }
        );
    }

    // Get the GUID of the currently selected resource and display it in the add-in.
    function getResourceGuid() {
        Office.context.document.getSelectedResourceAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    $('#message').html('Resource GUID: ' + result.value);
                }
            }
        );
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

// For a complete code sample that shows how to use a ViewSelectionChanged event handler in a Project add-in,
// see "Create your first task pane add-in for Project by using a text editor."
// https://learn.microsoft.com/office/dev/add-ins/project/create-your-first-task-pane-add-in-for-project-by-using-a-text-editor

Renvoie l’état de l’affichage actuel de la présentation (modification ou lecture).

getActiveViewAsync(options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<"edit" | "read">) => void): void;

Paramètres

Retours

Remarques

Ensemble de conditions requises : ActiveView

Peut déclencher un événement lorsque l’affichage change.

Renvoie l’état de l’affichage actuel de la présentation (modification ou lecture).

getActiveViewAsync(callback?: (result: AsyncResult<"edit" | "read">) => void): void;

Paramètres

Retours

Remarques

Ensemble de conditions requises : ActiveView

Peut déclencher un événement lorsque l’affichage change.

Exemples

function getFileView() {
    // Get whether the current view is edit or read.
    Office.context.document.getActiveViewAsync(function (asyncResult) {
        if (asyncResult.status == "failed") {
            showMessage("Action failed with error: " + asyncResult.error.message);
        }
        else {
            showMessage(asyncResult.value);
        }
    });
}

Renvoie l’intégralité du fichier de document sous forme de sections pouvant aller jusqu’à 4 194 304 octets (4 Mo). Pour les compléments sur iPad, la tranche de fichier est prise en charge jusqu’à 65536 (64 Ko). Remarque : la spécification de la taille de section de fichier au-dessus de la limite autorisée entraîne une erreur interne.

getFileAsync(fileType: FileType, options?: GetFileOptions, callback?: (result: AsyncResult<Office.File>) => void): void;

Paramètres

Retours

Remarques

Ensembles de conditions requises :

• Fichier compressé (lors de l’utilisation de Office.FileType.Compressed)

• Fichier

• TextFile (lors de l’utilisation de Office.FileType.Text)

Pour les compléments exécutés dans des applications Office autres qu’Office sur iPad, la méthode prend en charge l’obtention getFileAsync de fichiers par tranches allant jusqu’à 4194304 octets (4 Mo). Pour les compléments exécutés dans les applications Office sur iPad, la méthode prend en charge l’obtention getFileAsync de fichiers par tranches allant jusqu’à 65536 (64 Ko).

Le fileType paramètre peut être spécifié à l’aide de l’énumération Office.FileType ou des valeurs de texte. Mais les valeurs possibles varient selon l’application.

Types de fichiers pris en charge, par plateforme

Exemples

// The following example gets the document in Office Open XML ("compressed") format in 65536 bytes (64 KB) slices.
// Note: The implementation of app.showNotification in this example is from the Visual Studio template for Office Add-ins.
function getDocumentAsCompressed() {
    Office.context.document.getFileAsync(Office.FileType.Compressed, { sliceSize: 65536 /*64 KB*/ }, 
        function (result) {
            if (result.status == "succeeded") {
                // If the getFileAsync call succeeded, then
                // result.value will return a valid File Object.
                const myFile = result.value;
                const sliceCount = myFile.sliceCount;
                const docDataSlices = [];
                let slicesReceived = 0, gotAllSlices = true;
                app.showNotification("File size:" + myFile.size + " #Slices: " + sliceCount);

                // Get the file slices.
                getSliceAsync(myFile, 0, sliceCount, gotAllSlices, docDataSlices, slicesReceived);
            } else {
                app.showNotification("Error:", result.error.message);
            }
    });
}

function getSliceAsync(file, nextSlice, sliceCount, gotAllSlices, docDataSlices, slicesReceived) {
    file.getSliceAsync(nextSlice, function (sliceResult) {
        if (sliceResult.status == "succeeded") {
            if (!gotAllSlices) { /* Failed to get all slices, no need to continue. */
                return;
            }

            // Got one slice, store it in a temporary array.
            // (Or you can do something else, such as
            // send it to a third-party server.)
            docDataSlices[sliceResult.value.index] = sliceResult.value.data;
            if (++slicesReceived == sliceCount) {
              // All slices have been received.
              file.closeAsync();
              onGotAllSlices(docDataSlices);
            }
            else {
                getSliceAsync(file, ++nextSlice, sliceCount, gotAllSlices, docDataSlices, slicesReceived);
            }
        }
            else {
                gotAllSlices = false;
                file.closeAsync();
                app.showNotification("getSliceAsync Error:", sliceResult.error.message);
            }
    });
}

function onGotAllSlices(docDataSlices) {
    let docData = [];
    for (let i = 0; i < docDataSlices.length; i++) {
        docData = docData.concat(docDataSlices[i]);
    }

    let fileContent = new String();
    for (let j = 0; j < docData.length; j++) {
        fileContent += String.fromCharCode(docData[j]);
    }

    // Now all the file content is stored in 'fileContent' variable,
    // you can do something with it, such as print, fax...
}

// The following example gets the document in PDF format.
Office.context.document.getFileAsync(Office.FileType.Pdf,
    function(result) {
        if (result.status == "succeeded") {
            const myFile = result.value;
            const sliceCount = myFile.sliceCount;
            app.showNotification("File size:" + myFile.size + " #Slices: " + sliceCount);

            // Get the file slices.
            const docDataSlices = [];
            let slicesReceived = 0, gotAllSlices = true;
            getSliceAsync(myFile, 0, sliceCount, gotAllSlices, docDataSlices, slicesReceived);
            
            myFile.closeAsync();
        }
        else {
            app.showNotification("Error:", result.error.message);
        }
    }
);

Renvoie l’intégralité du fichier de document sous forme de sections pouvant aller jusqu’à 4 194 304 octets (4 Mo). Pour les compléments sur iPad, la tranche de fichier est prise en charge jusqu’à 65536 (64 Ko). Remarque : la spécification de la taille de section de fichier au-dessus de la limite autorisée entraîne une erreur interne.

getFileAsync(fileType: FileType, callback?: (result: AsyncResult<Office.File>) => void): void;

Paramètres

Retours

Remarques

Ensembles de conditions requises :

• Fichier compressé (lors de l’utilisation de Office.FileType.Compressed)

• Fichier

• TextFile (lors de l’utilisation de Office.FileType.Text)

Pour les compléments exécutés dans des applications Office autres qu’Office sur iPad, la méthode prend en charge l’obtention getFileAsync de fichiers par tranches allant jusqu’à 4194304 octets (4 Mo). Pour les compléments exécutés dans les applications Office sur iPad, la méthode prend en charge l’obtention getFileAsync de fichiers par tranches allant jusqu’à 65536 (64 Ko).

Le fileType paramètre peut être spécifié à l’aide de l’énumération Office.FileType ou des valeurs de texte. Mais les valeurs possibles varient selon l’application.

Types de fichiers pris en charge, par plateforme

Obtient les propriétés de fichier du document actif.

getFilePropertiesAsync(options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<Office.FileProperties>) => void): void;

Paramètres

Retours

Remarques

Ensembles de conditions requises : pas dans un ensemble

Vous obtenez l’URL du fichier avec la propriété asyncResult.value.urlurl .

Obtient les propriétés de fichier du document actif.

getFilePropertiesAsync(callback?: (result: AsyncResult<Office.FileProperties>) => void): void;

Paramètres

Retours

Remarques

Ensembles de conditions requises : pas dans un ensemble

Vous obtenez l’URL du fichier avec la propriété asyncResult.value.urlurl .

Exemples

// To read the URL of the current file, you need to write a callback function that returns the URL.
// The following example shows how to:
// 1. Pass an anonymous callback function that returns the value of the file's URL
//    to the callback parameter of the getFilePropertiesAsync method.
// 2. Display the value on the add-in's page.
function getFileUrl() {
    // Get the URL of the current file.
    Office.context.document.getFilePropertiesAsync(function (asyncResult) {
        const fileUrl = asyncResult.value.url;
        if (fileUrl == "") {
            showMessage("The file hasn't been saved yet. Save the file and try again");
        }
        else {
            showMessage(fileUrl);
        }
    });
}

Documents de projet uniquement. Obtient l’index maximal de la collection de ressources dans le projet actuel.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

getMaxResourceIndexAsync(options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<number>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtient l’index maximal de la collection de ressources dans le projet actuel.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

getMaxResourceIndexAsync(callback?: (result: AsyncResult<number>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getResourceTaskIndexAsync to get the maximum index of the collection 
// of resources in the current project. Then it uses the returned value and the getResourceByIndexAsync
// method to get each resource GUID. The example assumes that your add-in has a reference to the 
// jQuery library and that the following page controls are defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

(function () {
    "use strict";
    const resourceGuids = [];

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            app.initialize();
            $('#get-info').on("click", getResourceInfo);
        });
    };

    // Get the maximum resource index, and then get the resource GUIDs.
    function getResourceInfo() {
        getMaxResourceIndex().then(
            function (data) {
                getResourceGuids(data);
            }
        );
    }

    // Get the maximum index of the resources for the current project.
    function getMaxResourceIndex() {
        const defer = $.Deferred();
        Office.context.document.getMaxResourceIndexAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Get each resource GUID, and then display the GUIDs in the add-in.
    // There is no 0 index for resources, so start with index 1.
    function getResourceGuids(maxResourceIndex) {
        const defer = $.Deferred();
        for (let i = 1; i <= maxResourceIndex; i++) {
            getResourceGuid(i);
        }
        return defer.promise();
        function getResourceGuid(index) {
            Office.context.document.getResourceByIndexAsync(index,
                function (result) {
                    if (result.status === Office.AsyncResultStatus.Succeeded) {
                        resourceGuids.push(result.value);
                        if (index == maxResourceIndex) {
                            defer.resolve();
                            $('#message').html(resourceGuids.toString());
                        }
                    }
                    else {
                        onError(result.error);
                    }
                }
            );
        }
    }
    function onError(error) {
        app.showNotification(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtient l’index maximal de la collection de tâches dans le projet actuel.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

getMaxTaskIndexAsync(options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<number>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtient l’index maximal de la collection de tâches dans le projet actuel.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

getMaxTaskIndexAsync(callback?: (result: AsyncResult<number>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getMaxTaskIndexAsync to get the maximum index
// of the collection of tasks in the current project. Then it uses the returned value
// with the getTaskByIndexAsync method to get each task GUID.
// The example assumes your add-in has a reference to the jQuery library and that the
// following page controls are defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

(function () {
    "use strict";
    const taskGuids = [];

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            app.initialize();
            $('#get-info').on("click", getTaskInfo);
        });
    };

    // Get the maximum task index, and then get the task GUIDs.
    function getTaskInfo() {
        getMaxTaskIndex().then(
            function (data) {
                getTaskGuids(data);
            }
        );
    }

    // Get the maximum index of the tasks for the current project.
    function getMaxTaskIndex() {
        const defer = $.Deferred();
        Office.context.document.getMaxTaskIndexAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Get each task GUID, and then display the GUIDs in the add-in.
    function getTaskGuids(maxTaskIndex) {
        const defer = $.Deferred();
        for (let i = 0; i <= maxTaskIndex; i++) {
            getTaskGuid(i);
        }
        return defer.promise();
        function getTaskGuid(index) {
            Office.context.document.getTaskByIndexAsync(index,
                function (result) {
                    if (result.status === Office.AsyncResultStatus.Succeeded) {
                        taskGuids.push(result.value);
                        if (index == maxTaskIndex) {
                            defer.resolve();
                            $('#message').html(taskGuids.toString());
                        }
                    }
                    else {
                        onError(result.error);
                    }
                }
            );
        }
    }
    function onError(error) {
        app.showNotification(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtenir le champ Projet (par exemple, ProjectWebAccessURL).

getProjectFieldAsync(fieldId: number, options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtenir le champ Projet (par exemple, ProjectWebAccessURL).

getProjectFieldAsync(fieldId: number, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Exemples

// The following code example gets the values of three specified fields for the active project, 
// and then displays the values in the add-in.
// The example calls getProjectFieldAsync recursively, after the previous call returns successfully.
// It also tracks the calls to determine when all calls are sent.
// The example assumes your add-in has a reference to the jQuery library and that the 
// following page control is defined in the content div in the page body:
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // Get information for the active project.
            getProjectInformation();
        });
    };

    // Get the specified fields for the active project.
    function getProjectInformation() {
        const fields =
            [Office.ProjectProjectFields.Start, 
             Office.ProjectProjectFields.Finish, 
             Office.ProjectProjectFields.GUID];
        const fieldValues = ['Start: ', 'Finish: ', 'GUID: '];
        let index = 0; 
        getField();

        // Get each field, and then display the field values in the add-in.
        function getField() {
            if (index == fields.length) {
                let output = '';
                for (let i = 0; i < fieldValues.length; i++) {
                    output += fieldValues[i] + '<br />';
                }
                $('#message').html(output);
            }
            else {
                Office.context.document.getProjectFieldAsync(
                    fields[index],
                    function (result) {

                        // If the call is successful, get the field value and then get the next field.
                        if (result.status === Office.AsyncResultStatus.Succeeded) {
                            fieldValues[index] += result.value.fieldValue;
                            getField(index++);
                        }
                        else {
                            onError(result.error);
                        }
                    }
                );
            }
        }
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtenez le GUID de la ressource qui a l’index spécifié dans la collection de ressources.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

getResourceByIndexAsync(resourceIndex: number, options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtenez le GUID de la ressource qui a l’index spécifié dans la collection de ressources.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

getResourceByIndexAsync(resourceIndex: number, callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getMaxResourceIndexAsync to get the maximum index in the project's resource
// collection, and then calls getResourceByIndexAsync to get the GUID for each resource.
// The example assumes that your add-in has a reference to the jQuery library and that the following 
// page controls are defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

(function () {
    "use strict";
    const resourceGuids = [];

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            app.initialize();
            $('#get-info').on("click", getResourceInfo);
        });
    };

    // Get the maximum resource index, and then get the resource GUIDs.
    function getResourceInfo() {
        getMaxResourceIndex().then(
            function (data) {
                getResourceGuids(data);
            }
        );
    }

    // Get the maximum index of the resources for the current project.
    function getMaxResourceIndex() {
        const defer = $.Deferred();
        Office.context.document.getMaxResourceIndexAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Get each resource GUID, and then display the GUIDs in the add-in.
    // There is no 0 index for resources, so start with index 1.
    function getResourceGuids(maxResourceIndex) {
        const defer = $.Deferred();
        for (let i = 1; i <= maxResourceIndex; i++) {
            getResourceGuid(i);
        }
        return defer.promise();
        function getResourceGuid(index) {
            Office.context.document.getResourceByIndexAsync(index,
                function (result) {
                    if (result.status === Office.AsyncResultStatus.Succeeded) {
                        resourceGuids.push(result.value);
                        if (index == maxResourceIndex) {
                            defer.resolve();
                            $('#message').html(resourceGuids.toString());
                        }
                    }
                    else {
                        onError(result.error);
                    }
                }
            );
        }
    }
    function onError(error) {
        app.showNotification(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtenez le champ de ressource pour l’ID de ressource fourni. (par exemple, ResourceName)

getResourceFieldAsync(resourceId: string, fieldId: number, options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtenez le champ de ressource pour l’ID de ressource fourni. (par exemple, ResourceName)

getResourceFieldAsync(resourceId: string, fieldId: number, callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getSelectedResourceAsync to get the GUID of the resource
// that's currently selected in a resource view. Then it gets three resource field values by calling 
// getResourceFieldAsync recursively.
// The example assumes your add-in has a reference to the jQuery library and that the following 
// page controls are defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            $('#get-info').on("click", getResourceInfo);
        });
    };

    // Get the GUID of the resource and then get the resource fields.
    function getResourceInfo() {
        getResourceGuid().then(
            function (data) {
                getResourceFields(data);
            }
        );
    }

    // Get the GUID of the selected resource.
    function getResourceGuid() {
        const defer = $.Deferred();
        Office.context.document.getSelectedResourceAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Get the specified fields for the selected resource.
    function getResourceFields(resourceGuid) {
        const targetFields =
            [Office.ProjectResourceFields.Name,
             Office.ProjectResourceFields.Units, 
             Office.ProjectResourceFields.BaseCalendar];
        const fieldValues = ['Name: ', 'Units: ', 'Base calendar: '];
        let index = 0; 
        getField();

        // Get each field, and then display the field values in the add-in.
        function getField() {
            if (index == targetFields.length) {
                let output = '';
                for (let i = 0; i < fieldValues.length; i++) {
                    output += fieldValues[i] + '<br />';
                }
                $('#message').html(output);
            }

            // If the call is successful, get the field value and then get the next field.
            else {
                Office.context.document.getResourceFieldAsync(
                    resourceGuid,
                    targetFields[index],
                    function (result) {
                        if (result.status === Office.AsyncResultStatus.Succeeded) {
                            fieldValues[index] += result.value.fieldValue;
                            getField(index++);
                        }
                        else {
                            onError(result.error);
                        }
                    }
                );
            }
        }
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Lit les données contenues dans la sélection actuelle du document.

getSelectedDataAsync<T>(coercionType: Office.CoercionType, options?: GetSelectedDataOptions, callback?: (result: AsyncResult<T>) => void): void;

Paramètres

Retours

Remarques

Ensembles de conditions requises :

• HtmlCoercion (lors de l’utilisation de Office.CoercionType.Html)

• MatrixCoercion (lors de l’utilisation de Office.CoercionType.Matrix)

• OoxmlCoercion (lors de l’utilisation de Office.CoercionType.Ooxml)

• Selection

• TableCoercion (lors de l’utilisation de Office.CoercionType.Table)

• TextCoercion (lors de l’utilisation de Office.CoercionType.Text)

Dans la fonction de rappel transmise à la méthode getSelectedDataAsync, vous pouvez utiliser les propriétés de l’objet AsyncResult pour retourner les informations suivantes.

Les valeurs possibles pour le paramètre Office.CoercionType varient selon l’application Office.

Exemples

// The following example uses the getSelectedDataAsync method of the Document object to retrieve the
// user's current selection as text, and then display it in the add-in's page.

// Displays the user's current selection.
function showSelection() {
    Office.context.document.getSelectedDataAsync(
        Office.CoercionType.Text,
        {
            valueFormat: Office.ValueFormat.Unformatted,
            filterType: Office.FilterType.All
        },
        (result) => {
            const dataValue = result.value;
            write('Selected data is: ' + dataValue);
        }
    );
}
// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

// To read the value of the current selection, you need to write a callback function that reads the selection.
// The following example shows how to:
// 1. Pass an anonymous callback function that reads the value of the current selection
//    to the callback parameter of the getSelectedDataAsync method.
// 2. Read the selection as text, unformatted, and not filtered.
// 3. Display the value on the add-in's page.
function getText() {
    Office.context.document.getSelectedDataAsync(
        Office.CoercionType.Text,
        {
            valueFormat: Office.ValueFormat.Unformatted,
            filterType: Office.FilterType.All
        },
        (asyncResult) => {
            const error = asyncResult.error;
            if (asyncResult.status === Office.AsyncResultStatus.Failed) {
                write(error.name + ": " + error.message);
            } 
            else {
                // Get selected data.
                const dataValue = asyncResult.value; 
                write('Selected data is ' + dataValue);
            }
        }
    );
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

// The following code example gets the values of the selected cells. It uses the optional
// asyncContext parameter to pass some text to the callback function.
// The example assumes your add-in has a reference to the jQuery library and that the
// following page controls are defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

// The onReady function must be run each time a new page is loaded.
Office.onReady(() => {
    $(document).ready(() => {
        // After the DOM is loaded, add-in-specific code can run.
        $('#get-info').on("click", getSelectedText);
    });
});

// Gets the text from the selected cells in the document, and displays it in the add-in.
function getSelectedText() {
    Office.context.document.getSelectedDataAsync(
        Office.CoercionType.Text,
        { asyncContext: "Some related info" },
        (result) => {
            if (result.status === Office.AsyncResultStatus.Failed) {
                onError(result.error);
            }
            else {
                const output = String.format(
                    'Selected text: {0}<br/>Passed info: {1}',
                    result.value, result.asyncContext);
                $('#message').html(output);
            }
        }
    );
}

function onError(error) {
    $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
}

Lit les données contenues dans la sélection actuelle du document.

getSelectedDataAsync<T>(coercionType: Office.CoercionType, callback?: (result: AsyncResult<T>) => void): void;

Paramètres

Retours

Remarques

Ensembles de conditions requises :

• HtmlCoercion (lors de l’utilisation de Office.CoercionType.Html)

• MatrixCoercion (lors de l’utilisation de Office.CoercionType.Matrix)

• OoxmlCoercion (lors de l’utilisation de Office.CoercionType.Ooxml)

• Selection

• TableCoercion (lors de l’utilisation de Office.CoercionType.Table)

• TextCoercion (lors de l’utilisation de Office.CoercionType.Text)

Dans la fonction de rappel transmise à la méthode getSelectedDataAsync, vous pouvez utiliser les propriétés de l’objet AsyncResult pour retourner les informations suivantes.

Les valeurs possibles pour le paramètre Office.CoercionType varient selon l’application Office.

Documents de projet uniquement. Obtient l’ID de la ressource sélectionnée actuelle.

getSelectedResourceAsync(options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtient l’ID de la ressource sélectionnée actuelle.

getSelectedResourceAsync(callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getSelectedResourceAsync to get the GUID of the resource that's 
// currently selected in a resource view. Then it gets three resource field values by calling 
// getResourceFieldAsync recursively.
// The example assumes your add-in has a reference to the jQuery library and that the following page controls are
// defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            $('#get-info').on("click", getResourceInfo);
        });
    };

    // Get the GUID of the resource and then get the resource fields.
    function getResourceInfo() {
        getResourceGuid().then(
            function (data) {
                getResourceFields(data);
            }
        );
    }

    // Get the GUID of the selected resource.
    function getResourceGuid() {
        const defer = $.Deferred();
        Office.context.document.getSelectedResourceAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Get the specified fields for the selected resource.
    function getResourceFields(resourceGuid) {
        const targetFields =
            [Office.ProjectResourceFields.Name,
             Office.ProjectResourceFields.Units, 
             Office.ProjectResourceFields.BaseCalendar];
        const fieldValues = ['Name: ', 'Units: ', 'Base calendar: '];
        let index = 0; 
        getField();

        // Get each field, and then display the field values in the add-in.
        function getField() {
            if (index == targetFields.length) {
                let output = '';
                for (let i = 0; i < fieldValues.length; i++) {
                    output += fieldValues[i] + '<br />';
                }
                $('#message').html(output);
            }

            // If the call is successful, get the field value and then get the next field.
            else {
                Office.context.document.getResourceFieldAsync(
                    resourceGuid,
                    targetFields[index],
                    function (result) {
                        if (result.status === Office.AsyncResultStatus.Succeeded) {
                            fieldValues[index] += result.value.fieldValue;
                            getField(index++);
                        }
                        else {
                            onError(result.error);
                        }
                    }
                );
            }
        }
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtient l’ID de la tâche sélectionnée actuelle.

getSelectedTaskAsync(options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtient l’ID de la tâche sélectionnée actuelle.

getSelectedTaskAsync(callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getSelectedTaskAsync to get the GUID of the task that's currently
// selected in a task view. Then it gets task properties by calling getTaskAsync.
// The example assumes your add-in has a reference to the jQuery library and that the following page
// controls are defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            $('#get-info').on("click", getTaskInfo);
        });
    };

    // // Get the GUID of the task, and then get local task properties.
    function getTaskInfo() {
        getTaskGuid().then(
            function (data) {
                getTaskProperties(data);
            }
        );
    }

    // Get the GUID of the selected task.
    function getTaskGuid() {
        const defer = $.Deferred();
        Office.context.document.getSelectedTaskAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Get local properties for the selected task, and then display it in the add-in.
    function getTaskProperties(taskGuid) {
        Office.context.document.getTaskAsync(
            taskGuid,
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    const taskInfo = result.value;
                    const output = String.format(
                        'Name: {0}<br/>GUID: {1}<br/>SharePoint task ID: {2}<br/>Resource names: {3}',
                        taskInfo.taskName, taskGuid, taskInfo.wssTaskId, taskInfo.resourceNames);
                    $('#message').html(output);
                }
            }
        );
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtenez le type d’affichage (par exemple, Gantt) et le nom de la vue sélectionnés.

getSelectedViewAsync(options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtenez le type d’affichage (par exemple, Gantt) et le nom de la vue sélectionnés.

getSelectedViewAsync(callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls adds a ViewSelectionChanged event handler that
// calls getSelectedViewAsync to get the name and type of the active view in the document.
// The example assumes your add-in has a reference to the jQuery library and that
// the following page control is defined in the content div in the page body:
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            Office.context.document.addHandlerAsync(
                Office.EventType.ViewSelectionChanged,
                getActiveView);
            getActiveView();
        });
    };

    // Get the active view's name and type.
    function getActiveView() {
        Office.context.document.getSelectedViewAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    const output = String.format(
                        'View name: {0}<br/>View type: {1}',
                        result.value.viewName, viewType);
                    $('#message').html(output);
                }
            }
        );
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtenez le Nom de la tâche, l’ID de tâche WSS et les ResourceNames pour taskId donné.

getTaskAsync(taskId: string, options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtenez le Nom de la tâche, l’ID de tâche WSS et les ResourceNames pour taskId donné.

getTaskAsync(taskId: string, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getSelectedTaskAsync to get the task GUID of the currently
// selected task. Then it calls getTaskAsync to get the properties for the task that are
// available from the JavaScript API for Office.
// The example assumes your add-in has a reference to the jQuery library and that the
// following page controls are defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            $('#get-info').on("click", getTaskInfo);
        });
    };

    // Get the GUID of the task, and then get local task properties.
    function getTaskInfo() {
        getTaskGuid().then(
            function (data) {
                getTaskProperties(data);
            }
        );
    }

    // Get the GUID of the selected task.
    function getTaskGuid() {
        const defer = $.Deferred();
        Office.context.document.getSelectedTaskAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Get local properties for the selected task, and then display it in the add-in.
    function getTaskProperties(taskGuid) {
        Office.context.document.getTaskAsync(
            taskGuid,
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    const taskInfo = result.value;
                    const output = String.format(
                        'Name: {0}<br/>GUID: {1}<br/>SharePoint task ID: {2}<br/>Resource names: {3}',
                        taskInfo.taskName, taskGuid, taskInfo.wssTaskId, taskInfo.resourceNames);
                    $('#message').html(output);
                }
            }
        );
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtenez le GUID de la tâche qui a l’index spécifié dans la collection de tâches.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

getTaskByIndexAsync(taskIndex: number, options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtenez le GUID de la tâche qui a l’index spécifié dans la collection de tâches.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

getTaskByIndexAsync(taskIndex: number, callback?: (result: AsyncResult<string>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getMaxTaskIndexAsync to get the
// maximum index in the project's task collection, and then
// calls getTaskByIndexAsync to get the GUID for each task.
// The example assumes that your add-in has a reference to the
// jQuery library and that the following page controls are defined
// in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

(function () {
    "use strict";
    const taskGuids = [];

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            app.initialize();
            $('#get-info').on("click", getTaskInfo);
        });
    };

    // Get the maximum task index, and then get the task GUIDs.
    function getTaskInfo() {
        getMaxTaskIndex().then(
            function (data) {
                getTaskGuids(data);
            }
        );
    }

    // Get the maximum index of the tasks for the current project.
    function getMaxTaskIndex() {
        const defer = $.Deferred();
        Office.context.document.getMaxTaskIndexAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Get each task GUID, and then display the GUIDs in the add-in.
    function getTaskGuids(maxTaskIndex) {
        const defer = $.Deferred();
        for (let i = 0; i <= maxTaskIndex; i++) {
            getTaskGuid(i);
        }
        return defer.promise();
        function getTaskGuid(index) {
            Office.context.document.getTaskByIndexAsync(index,
                function (result) {
                    if (result.status === Office.AsyncResultStatus.Succeeded) {
                        taskGuids.push(result.value);
                        if (index == maxTaskIndex) {
                            defer.resolve();
                            $('#message').html(taskGuids.toString());
                        }
                    }
                    else {
                        onError(result.error);
                    }
                }
            );
        }
    }
    function onError(error) {
        app.showNotification(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtenir le champ de tâche pour l’ID de tâche fourni. (par exemple, StartDate).

getTaskFieldAsync(taskId: string, fieldId: number, options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtenir le champ de tâche pour l’ID de tâche fourni. (par exemple, StartDate).

getTaskFieldAsync(taskId: string, fieldId: number, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getSelectedTaskAsync to get the GUID of the task that's currently
// selected in a task view. Then it gets two task field values by calling getTaskFieldAsync recursively.
// The example assumes your add-in has a reference to the jQuery library and that the following page
// controls are defined in the content div in the page body:
// <input id="get-info" type="button" value="Get info" /><br />
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {
            
            // After the DOM is loaded, add-in-specific code can run.
            $('#get-info').on("click", getTaskInfo);
        });
    };

    // Get the GUID of the task, and then get the task fields.
    function getTaskInfo() {
        getTaskGuid().then(
            function (data) {
                getTaskFields(data);
            }
        );
    }

    // Get the GUID of the selected task.
    function getTaskGuid() {
        const defer = $.Deferred();
        Office.context.document.getSelectedTaskAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Get the specified fields for the selected task.
    function getTaskFields(taskGuid) {
        let output = '';
        const targetFields = [Office.ProjectTaskFields.Priority, Office.ProjectTaskFields.PercentComplete];
        const fieldValues = ['Priority: ', '% Complete: '];
        let index = 0;
        getField();

        // Get each field, and then display the field values in the add-in.
        function getField() {
            if (index == targetFields.length) {
                for (let i = 0; i < fieldValues.length; i++) {
                    output += fieldValues[i] + '<br />';
                }
                $('#message').html(output);
            }

            // Get the field value. If the call is successful, then get the next field.
            else {
                Office.context.document.getTaskFieldAsync(
                    taskGuid,
                    targetFields[index],
                    function (result) {
                        if (result.status === Office.AsyncResultStatus.Succeeded) {
                            fieldValues[index] += result.value.fieldValue;
                            getField(index++);
                        }
                        else {
                            onError(result.error);
                        }
                    }
                );
            }
        }
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Obtenez l’URL WSS et le nom de la liste des tâches. Le MPP est également synchronisé.

getWSSUrlAsync(options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Obtenez l’URL WSS et le nom de la liste des tâches. Le MPP est également synchronisé.

getWSSUrlAsync(callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Accède à l’emplacement ou l’objet spécifié dans le document.

goToByIdAsync(id: string | number, goToType: GoToType, options?: GoToByIdOptions, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Remarques

Ensemble de conditions requises : pas dans un ensemble

PowerPoint ne prend pas en charge la méthode goToByIdAsync dans les affichages maîtres.

Le comportement provoqué par l’option selectionMode varie selon l’application Office :

Dans Excel : Office.SelectionMode.Selected sélectionne tout le contenu de la liaison ou de l’élément nommé. Office.SelectionMode.None pour les liaisons de texte, sélectionne la cellule ; pour les liaisons de matrice, les liaisons de tableau et les éléments nommés, sélectionne la première cellule de données (pas la première cellule dans la ligne d’en-tête pour les tableaux).

Dans PowerPoint : Office.SelectionMode.Selected sélectionne le titre ou la première zone de texte de la diapositive. Office.SelectionMode.None ne sélectionne rien.

Dans Word : Office.SelectionMode.Selected sélectionne tout le contenu de la liaison. Office.SelectionMode.None pour les liaisons de texte, déplace le curseur au début du texte ; pour les liaisons de matrice et de tableau, sélectionne la première cellule de données (pas la première cellule dans la ligne d’en-tête pour les tableaux).

Accède à l’emplacement ou l’objet spécifié dans le document.

goToByIdAsync(id: string | number, goToType: GoToType, callback?: (result: AsyncResult<any>) => void): void;

Paramètres

Retours

Remarques

Ensemble de conditions requises : pas dans un ensemble

PowerPoint ne prend pas en charge la méthode goToByIdAsync dans les affichages maîtres.

Le comportement provoqué par l’option selectionMode varie selon l’application Office :

Dans Excel : Office.SelectionMode.Selected sélectionne tout le contenu de la liaison ou de l’élément nommé. Office.SelectionMode.None pour les liaisons de texte, sélectionne la cellule ; pour les liaisons de matrice, les liaisons de tableau et les éléments nommés, sélectionne la première cellule de données (pas la première cellule dans la ligne d’en-tête pour les tableaux).

Dans PowerPoint : Office.SelectionMode.Selected sélectionne le titre ou la première zone de texte de la diapositive. Office.SelectionMode.None ne sélectionne rien.

Dans Word : Office.SelectionMode.Selected sélectionne tout le contenu de la liaison. Office.SelectionMode.None pour les liaisons de texte, déplace le curseur au début du texte ; pour les liaisons de matrice et de tableau, sélectionne la première cellule de données (pas la première cellule dans la ligne d’en-tête pour les tableaux).

Exemples

// Go to a binding by id (Word and Excel)
// The following example shows how to:
// 1. Create a table binding using the addFromSelectionAsync method as a sample binding to work with.
// 2. Specify that binding as the binding to go to.
// 3. Pass an anonymous callback function that returns the status of the operation
//    to the callback parameter of the goToByIdAsync method.
// 4. Display the value on the add-in's page.
function gotoBinding() {
    // Create a new table binding for the selected table.
    Office.context.document.bindings.addFromSelectionAsync("table",{ id: "MyTableBinding" }, function (asyncResult) {
    if (asyncResult.status == "failed") {
              showMessage("Action failed with error: " + asyncResult.error.message);
          }
          else {
              showMessage("Added new binding with type: " + asyncResult.value.type +" and id: " + asyncResult.value.id);
          }
    });

    // Go to binding by id.
    Office.context.document.goToByIdAsync("MyTableBinding", Office.GoToType.Binding, function (asyncResult) {
        if (asyncResult.status == "failed") {
            showMessage("Action failed with error: " + asyncResult.error.message);
        }
        else {
            showMessage("Navigation successful");
        }
    });
}

// Go to a table in a spreadsheet (Excel)
// The following example shows how to:
// 1. Specify a table by name as the table to go to.
// 2. Pass an anonymous callback function that returns the status of the operation
//    to the callback parameter of the goToByIdAsync method.
// 3. Display the value on the add-in's page.
function goToTable() {
    Office.context.document.goToByIdAsync("Table1", Office.GoToType.NamedItem, function (asyncResult) {
        if (asyncResult.status == "failed") {
            showMessage("Action failed with error: " + asyncResult.error.message);
        }
        else {
            showMessage("Navigation successful");
        }
    });
}

// Go to the currently selected slide by id (PowerPoint)
// The following example shows how to:
// 1. Get the id of the currently selected slides using the getSelectedDataAsync method.
// 2. Specify the returned id as the slide to go to.
// 3. Pass an anonymous callback function that returns the status of the operation
//    to the callback parameter of the goToByIdAsync method.
// 4. Display the value of the stringified JSON object returned by asyncResult.value,
//    which contains information about the selected slides, on the add-in's page.
let firstSlideId = 0;
function gotoSelectedSlide() {
    //Get currently selected slide's id
    Office.context.document.getSelectedDataAsync(Office.CoercionType.SlideRange, function (asyncResult) {
        if (asyncResult.status == "failed") {
            app.showNotification("Action failed with error: " + asyncResult.error.message);
        }
        else {
            firstSlideId = asyncResult.value.slides[0].id;
            app.showNotification(JSON.stringify(asyncResult.value));
        }
    });
    //Go to slide by id.
    Office.context.document.goToByIdAsync(firstSlideId, Office.GoToType.Slide, function (asyncResult) {
        if (asyncResult.status == "failed") {
            app.showNotification("Action failed with error: " + asyncResult.error.message);
        }
        else {
            app.showNotification("Navigation successful");
        }
    });
}

// Go to slide by index (PowerPoint)
// The following example shows how to:
// 1. Specify the index of the first, last, previous, or next slide to go to.
// 2. Pass an anonymous callback function that returns the status of the operation
//    to the callback parameter of the goToByIdAsync method.
// 3. Display the value on the add-in's page.
function goToSlideByIndex() {
    const goToFirst = Office.Index.First;
    const goToLast = Office.Index.Last;
    const goToPrevious = Office.Index.Previous;
    const goToNext = Office.Index.Next;

    Office.context.document.goToByIdAsync(goToNext, Office.GoToType.Index, function (asyncResult) {
        if (asyncResult.status == "failed") {
            showMessage("Action failed with error: " + asyncResult.error.message);
        }
        else {
            showMessage("Navigation successful");
        }
    });
}

Supprime un gestionnaire d’événements pour le type d’événement spécifié.

removeHandlerAsync(eventType: Office.EventType, options?: RemoveHandlerOptions, callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Remarques

Ensemble de conditions requises : DocumentEvents

Supprime un gestionnaire d’événements pour le type d’événement spécifié.

removeHandlerAsync(eventType: Office.EventType, callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Remarques

Ensemble de conditions requises : DocumentEvents

Exemples

// The following example removes the event handler named 'MyHandler'.
function removeSelectionChangedEventHandler() {
    Office.context.document.removeHandlerAsync(Office.EventType.DocumentSelectionChanged, {handler:MyHandler});
}

function MyHandler(eventArgs) {
    doSomethingWithDocument(eventArgs.document);
}

// The following code example uses addHandlerAsync to add an event handler for the
// ResourceSelectionChanged event and removeHandlerAsync to remove the handler.
// When a resource is selected in a resource view, the handler displays the
// resource GUID. When the handler is removed, the GUID is not displayed.
// The example assumes that your add-in has a reference to the jQuery library and
// that the following page control is defined in the content div in the page body:
// <input id="remove-handler" type="button" value="Remove handler" /><br />
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            Office.context.document.addHandlerAsync(
                Office.EventType.ResourceSelectionChanged,
                getResourceGuid);
            $('#remove-handler').on("click", removeEventHandler);
        });
    };

    // Remove the event handler.
    function removeEventHandler() {
        Office.context.document.removeHandlerAsync(
            Office.EventType.ResourceSelectionChanged,
            {handler:getResourceGuid,
            asyncContext:'The handler is removed.'},
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    $('#remove-handler').attr('disabled', 'disabled');
                    $('#message').html(result.asyncContext);
                }
            }
        );
    }

    // Get the GUID of the currently selected resource and display it in the add-in.
    function getResourceGuid() {
        Office.context.document.getSelectedResourceAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    $('#message').html('Resource GUID: ' + result.value);
                }
            }
        );
    }

    function onError(error) {
        $('#message').html(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Documents de projet uniquement. Définissez le champ de ressource pour l’ID de ressource spécifié.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

setResourceFieldAsync(resourceId: string, fieldId: number, fieldValue: string | number | boolean | object, options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Définissez le champ de ressource pour l’ID de ressource spécifié.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

setResourceFieldAsync(resourceId: string, fieldId: number, fieldValue: string | number | boolean | object, callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getSelectedResourceAsync to get the GUID of the resource that's
// currently selected in a resource view. Then it sets two resource field values by calling
// setResourceFieldAsync recursively.
// The getSelectedTaskAsync method used in the example requires that a task view
// (for example, Task Usage) is the active view and that a task is selected. See the addHandlerAsync
// method for an example that activates a button based on the active view type.
// The example assumes your add-in has a reference to the jQuery library and that the
// following page controls are defined in the content div in the page body:
// <input id="set-info" type="button" value="Set info" /><br />
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {

            // After the DOM is loaded, add-in-specific code can run.
            app.initialize();
            $('#set-info').on("click", setResourceInfo);
        });
    };

    // Get the GUID of the resource, and then get the resource fields.
    function setResourceInfo() {
        getResourceGuid().then(
            function (data) {
                setResourceFields(data);
            }
        );
    }

    // Get the GUID of the selected resource.
    function getResourceGuid() {
        const defer = $.Deferred();
        Office.context.document.getSelectedResourceAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Set the specified fields for the selected resource.
    function setResourceFields(resourceGuid) {
        const targetFields = [Office.ProjectResourceFields.StandardRate, Office.ProjectResourceFields.Notes];
        const fieldValues = [.28, 'Notes for the resource.'];

        // Set the field value. If the call is successful, set the next field.
        for (let i = 0; i < targetFields.length; i++) {
            Office.context.document.setResourceFieldAsync(
                resourceGuid,
                targetFields[i],
                fieldValues[i],
                function (result) {
                    if (result.status === Office.AsyncResultStatus.Succeeded) {
                        i++;
                    }
                    else {
                        onError(result.error);
                    }
                }
            );
        }
        $('#message').html('Field values set');
    }

    function onError(error) {
        app.showNotification(error.name + ' ' + error.code + ': ' + error.message);
    }
})();

Écrit les données spécifiées dans la sélection actuelle.

setSelectedDataAsync(data: string | TableData | any[][], options?: SetSelectedDataOptions, callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Remarques

Ensembles de conditions requises :

• HtmlCoercion, (lors de l’utilisation de Office.CoercionType.Html)

• ImageCoercion 1.1 (lors de l’utilisation de Office.CoercionType.Image)

• MatrixCoercion (lors de l’utilisation de Office.CoercionType.Matrix)

• OoxmlCoercion (lors de l’utilisation de Office.CoercionType.Ooxml)

• Selection

• TableCoercion (lors de l’utilisation de Office.CoercionType.Table)

• TextCoercion (lors de l’utilisation de Office.CoercionType.Text)

• ImageCoercion 1.2 (lors de l’utilisation de Office.CoercionType.XmlSvg)

Comportements propres à l’application

Les actions spécifiques à l’application suivantes s’appliquent lors de l’écriture de données dans une sélection.

Applications

Les valeurs possibles pour le paramètre Office.CoercionType varient selon l’application Office.

Exemples

// The following example sets the selected text or cell to "Hello World!", 
// and if that fails, displays the value of the error.message property.
function writeText() {
    Office.context.document.setSelectedDataAsync("Hello World!",
        function (asyncResult) {
            const error = asyncResult.error;
            if (asyncResult.status === Office.AsyncResultStatus.Failed){
                write(error.name + ": " + error.message);
            }
        });
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

// Specifying the optional coercionType parameter lets you specify the kind of data you want to write
// to a selection. The following example writes data as an array of three rows of two columns, 
// specifying the coercionType as `Matrix` for that data structure, and if that fails, 
// displays the value of the error.message property.
function writeMatrix() {
    Office.context.document.setSelectedDataAsync(
        [["Red", "Rojo"], ["Green", "Verde"], ["Blue", "Azul"]],
        {coercionType: Office.CoercionType.Matrix}
        function (asyncResult) {
            const error = asyncResult.error;
            if (asyncResult.status === Office.AsyncResultStatus.Failed){
                write(error.name + ": " + error.message);
            }
        });
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

// The following example writes data as a one column table with a header and four rows, 
// specifying the coercionType as `Table` for that data structure, and if that fails, 
// displays the value of the error.message property.
function writeTable() {
    // Build table.
    const myTable = new Office.TableData();
    myTable.headers = [["Cities"]];
    myTable.rows = [['Berlin'], ['Roma'], ['Tokyo'], ['Seattle']];

    // Write table.
    Office.context.document.setSelectedDataAsync(myTable, {coercionType: Office.CoercionType.Table},
        function (result) {
            const error = result.error
            if (result.status === Office.AsyncResultStatus.Failed) {
                write(error.name + ": " + error.message);
            }
    });
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

// In Word if you want to write HTML to the selection, you can specify the coercionType parameter as `Html`
// as shown in the following example, which uses HTML <b> tags to make "Hello" bold.
function writeHtmlData() {
    Office.context.document.setSelectedDataAsync(
        "<b>Hello</b> World!", {coercionType: Office.CoercionType.Html}, function (asyncResult) {
            if (asyncResult.status === Office.AsyncResultStatus.Failed) {
                write('Error: ' + asyncResult.error.message);
            }
    });
}

// Function that writes to a div with id='message' on the page.
function write(message){
    document.getElementById('message').innerText += message; 
}

// In Word, PowerPoint, or Excel, if you want to write an image to the selection, you can specify the coercionType
// parameter as `Image` as shown in the following example. Note that imageLeft and imageTop are ignored by Word.
function insertPictureAtSelection(base64EncodedImageStr) {

    Office.context.document.setSelectedDataAsync(base64EncodedImageStr, {
        coercionType: Office.CoercionType.Image,
        imageLeft: 50,
        imageTop: 50,
        imageWidth: 100,
        imageHeight: 100
    },
    function (asyncResult) {
        if (asyncResult.status === Office.AsyncResultStatus.Failed) {
            console.log("Action failed with error: " + asyncResult.error.message);
        }
    });
}

// In Word, PowerPoint, or Excel, if you want to write an scalable vector graphic (SVG) to the selection, you can specify the 
// coercionType parameter as `XmlSvg` as shown in the following example. Note that imageLeft and imageTop are ignored by Word.
function insertSvgAtSelection(base64EncodedImageStr) {
    Office.context.document.setSelectedDataAsync(getImageAsBase64String(), {
        coercionType: Office.CoercionType.XmlSvg,
        imageLeft: 50,
        imageTop: 50,
        imageWidth: 400
    },
        function (asyncResult) {
            if (asyncResult.status === Office.AsyncResultStatus.Failed) {
                console.log(asyncResult.error.message);
            }
        });
}

Écrit les données spécifiées dans la sélection actuelle.

setSelectedDataAsync(data: string | TableData | any[][], callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Remarques

Ensembles de conditions requises :

• HtmlCoercion, (lors de l’utilisation de Office.CoercionType.Html)

• ImageCoercion (lors de l’utilisation de Office.CoercionType.Image)

• MatrixCoercion (lors de l’utilisation de Office.CoercionType.Matrix)

• OoxmlCoercion (lors de l’utilisation de Office.CoercionType.Ooxml)

• Selection

• TableCoercion (lors de l’utilisation de Office.CoercionType.Table)

• TextCoercion (lors de l’utilisation de Office.CoercionType.Text)

• ImageCoercion 1.2 (lors de l’utilisation de Office.CoercionType.XmlSvg)

Comportements propres à l’application

Les actions spécifiques à l’application suivantes s’appliquent lors de l’écriture de données dans une sélection.

Applications

Les valeurs possibles pour le paramètre Office.CoercionType varient selon l’application Office.

Documents de projet uniquement. Définissez le champ de tâche pour l’ID de tâche spécifié.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

setTaskFieldAsync(taskId: string, fieldId: number, fieldValue: string | number | boolean | object, options?: Office.AsyncContextOptions, callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Documents de projet uniquement. Définissez le champ de tâche pour l’ID de tâche spécifié.

Important : cette API fonctionne uniquement dans Project sur le bureau Windows.

setTaskFieldAsync(taskId: string, fieldId: number, fieldValue: string | number | boolean | object, callback?: (result: AsyncResult<void>) => void): void;

Paramètres

Retours

Exemples

// The following code example calls getSelectedTaskAsync to get the GUID of the task that's
// currently selected in a task view. Then it sets two task field values by calling
// setTaskFieldAsync recursively.
// The getSelectedTaskAsync method used in the example requires that a task view
// (for example, Task Usage) is the active view and that a task is selected. See the
// addHandlerAsync method for an example that activates a button based on the active view type.
// The example assumes your add-in has a reference to the jQuery library and that the
// following page controls are defined in the content div in the page body:
// <input id="set-info" type="button" value="Set info" /><br />
// <span id="message"></span>

(function () {
    "use strict";

    // The initialize function must be run each time a new page is loaded.
    Office.initialize = function (reason) {
        $(document).ready(function () {
            
            // After the DOM is loaded, add-in-specific code can run.
            app.initialize();
            $('#set-info').on("click", setTaskInfo);
        });
    };

    // Get the GUID of the task, and then get the task fields.
    function setTaskInfo() {
        getTaskGuid().then(
            function (data) {
                setTaskFields(data);
            }
        );
    }

    // Get the GUID of the selected task.
    function getTaskGuid() {
        const defer = $.Deferred();
        Office.context.document.getSelectedTaskAsync(
            function (result) {
                if (result.status === Office.AsyncResultStatus.Failed) {
                    onError(result.error);
                }
                else {
                    defer.resolve(result.value);
                }
            }
        );
        return defer.promise();
    }

    // Set the specified fields for the selected task.
    function setTaskFields(taskGuid) {
        const targetFields = [Office.ProjectTaskFields.Active, Office.ProjectTaskFields.Notes];
        const fieldValues = [true, 'Notes for the task.'];

        // Set the field value. If the call is successful, set the next field.
        for (let i = 0; i < targetFields.length; i++) {
            Office.context.document.setTaskFieldAsync(
                taskGuid,
                targetFields[i],
                fieldValues[i],
                function (result) {
                    if (result.status === Office.AsyncResultStatus.Succeeded) {
                        i++;
                    }
                    else {
                        onError(result.error);
                    }
                }
            );
        }
        $('#message').html('Field values set');
    }

    function onError(error) {
        app.showNotification(error.name + ' ' + error.code + ': ' + error.message);
    }
})();