Modifier

Partager via

Add-AzDnsRecordConfig

  • Reference
Module:
Az.Dns

Adds a DNS record to a local record set object.

Syntax

Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Ipv4Address <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Ipv6Address <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Nsdname <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Exchange <String>
   -Preference <UInt16>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Ptrdname <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Value <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Priority <UInt16>
   -Target <String>
   -Port <UInt16>
   -Weight <UInt16>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Cname <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -CaaFlags <Byte>
   -CaaTag <String>
   -CaaValue <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -KeyTag <Int32>
   -Algorithm <Int32>
   -DigestType <Int32>
   -Digest <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Usage <Int32>
   -Selector <Int32>
   -MatchingType <Int32>
   -CertificateAssociationData <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]
Add-AzDnsRecordConfig
   -RecordSet <DnsRecordSet>
   -Order <UInt16>
   -Preference <UInt16>
   -Flags <String>
    -Services <String>
   -Regexp <String>
   -Replacement <String>
   [-DefaultProfile <IAzureContextContainer>]
   [<CommonParameters>]

Description

The Add-AzDnsRecordConfig cmdlet adds a Domain Name System (DNS) record to a RecordSet object. The RecordSet object is an offline object, and changes to it do not change the DNS responses until after you run the Set-AzDnsRecordSet cmdlet to persist the change to the Microsoft Azure DNS service. SOA records are created when a DNS zone is created, and are removed when the DNS zone is deleted. You cannot add or remove SOA records, but you can edit them. You can pass the RecordSet object to this cmdlet as a parameter or by using the pipeline operator.

Examples

Example 1: Add an A record to a record set

$RecordSet = Get-AzDnsRecordSet -Name www -RecordType A -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Ipv4Address 1.2.3.4
Set-AzDnsRecordSet -RecordSet $RecordSet

# You can also pipe the above sequence:

Get-AzDnsRecordSet -Name www -RecordType A -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Ipv4Address 1.2.3.4 | Set-AzDnsRecordSet

This example adds an A record to an existing record set.

Example 2: Add an AAAA record to a record set

$RecordSet = Get-AzDnsRecordSet -Name www -RecordType AAAA -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Ipv6Address 2001:DB80:4009:1803::1005
Set-AzDnsRecordSet -RecordSet $RecordSet

# You can also pipe the above sequence:

Get-AzDnsRecordSet -Name www -RecordType AAAA -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Ipv6Address 2001:DB80:4009:1803::1005 | Set-AzDnsRecordSet

This example adds an AAAA record to an existing record set.

Example 3: Add a CNAME record to a record set

$RecordSet = Get-AzDnsRecordSet -Name www -RecordType CNAME -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Cname contoso.com
Set-AzDnsRecordSet -RecordSet $RecordSet

# You can also pipe the above sequence:

Get-AzDnsRecordSet -Name www -RecordType CNAME -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Cname contoso.com | Set-AzDnsRecordSet

This example adds a CNAME record to an existing record set. Because a CNAME record set can contain at most one record, it must initially be an empty record set, or existing records must be removed using Remove-AzDnsRecordConfig.

Example 4: Add an MX record to a record set

$RecordSet = Get-AzDnsRecordSet -Name "@" -RecordType MX -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -Exchange mail.microsoft.com -Preference 5 -RecordSet $RecordSet
Set-AzDnsRecordSet -RecordSet $RecordSet

# You can also pipe the above sequence:

Get-AzDnsRecordSet -Name "@" -RecordType MX -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Exchange mail.microsoft.com -Preference 5 | Set-AzDnsRecordSet

This example adds an MX record to an existing record set. The record name "@" indicates a record set at the zone apex.

Example 5: Add an NS record to a record set

$RecordSet = Get-AzDnsRecordSet -Name abc -RecordType NS -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -Nsdname ns1.myzone.com -RecordSet $RecordSet
Set-AzDnsRecordSet -RecordSet $RecordSet

# You can also pipe the above sequence:

Get-AzDnsRecordSet -Name abc -RecordType NS -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Nsdname ns1.myzone.com | Set-AzDnsRecordSet

This example adds an NS record to an existing record set.

Example 6: Add a PTR record to a record set

$RecordSet = Get-AzDnsRecordSet -Name 4 -RecordType PTR -ResourceGroupName MyResourceGroup -ZoneName 3.2.1.in-addr.arpa
Add-AzDnsRecordConfig -Ptrdname www.contoso.com -RecordSet $RecordSet
Set-AzDnsRecordSet -RecordSet $RecordSet

# The above sequence can also be piped:

Get-AzDnsRecordSet -Name 4 -RecordType PTR -ResourceGroupName MyResourceGroup -ZoneName 3.2.1.in-addr.arpa | Add-AzDnsRecordConfig -Ptrdname www.contoso.com | Set-AzDnsRecordSet

This example adds a PTR record to an existing record set.

Example 7: Add an SRV record to a record set

$RecordSet = Get-AzDnsRecordSet -Name _sip._tcp -RecordType SRV -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Priority 0 -Weight 5 -Port 8080 -Target target.example.com
Set-AzDnsRecordSet -RecordSet $RecordSet

# The above sequence can also be piped:

Get-AzDnsRecordSet -Name _sip._tcp -RecordType SRV -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Priority 0 -Weight 5 -Port 8080 -Target target.example.com  | Set-AzDnsRecordSet

This example adds an SRV record to an existing record set.

Example 8: Add a TXT record to a record set

$RecordSet = Get-AzDnsRecordSet -Name text -RecordType TXT -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Value "This is a TXT Record"
Set-AzDnsRecordSet -RecordSet $RecordSet

# The above sequence can also be piped:

Get-AzDnsRecordSet -Name text -RecordType TXT -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Value "This is a TXT Record" | Set-AzDnsRecordSet

This example adds a TXT record to an existing record set.

Example 9: Add a DS record to a record set

$RecordSet = Get-AzDnsRecordSet -Name www -RecordType DS -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -KeyTag 12345 -Algorithm 3 -DigestType 1 -Digest "49FD46E6C4B45C55D4AC"
Set-AzDnsRecordSet -RecordSet $RecordSet

# The above sequence can also be piped:

Get-AzDnsRecordSet -Name www -RecordType DS -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -KeyTag 12345 -Algorithm 3 -DigestType 1 -Digest "49FD46E6C4B45C55D4AC" | Set-AzDnsRecordSet

Example 10: Add a TLSA record to a record set

$RecordSet = Get-AzDnsRecordSet -Name _443._tcp.www -RecordType TLSA -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Usage 3 -Selector 1 -MatchingType 1 -CertificateAssociationData "49FD46E6C4B45C55D4AC"
Set-AzDnsRecordSet -RecordSet $RecordSet

# The above sequence can also be piped:

Get-AzDnsRecordSet -Name _443._tcp.www -RecordType TLSA -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Usage 3 -Selector 1 -MatchingType 1 -CertificateAssociationData "49FD46E6C4B45C55D4AC" | Set-AzDnsRecordSet

Example 11: Add a NAPTR record to a record set

$RecordSet = Get-AzDnsRecordSet -Name www -RecordType NAPTR -ResourceGroupName MyResourceGroup -ZoneName myzone.com
Add-AzDnsRecordConfig -RecordSet $RecordSet -Order 100 -Preference 100 -Flags "s" -Services "http" -Regexp "" -Replacement "www.contoso.com"
Set-AzDnsRecordSet -RecordSet $RecordSet

# The above sequence can also be piped:

Get-AzDnsRecordSet -Name www -RecordType NAPTR -ResourceGroupName MyResourceGroup -ZoneName myzone.com | Add-AzDnsRecordConfig -Order 100 -Preference 100 -Flags "s" -Services "http" -Regexp "" -Replacement "www.contoso.com" | Set-AzDnsRecordSet

Parameters

-Algorithm

The algorithm field of the DS record to add.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-CaaFlags

The flags for the CAA record to add. Must be a number between 0 and 255.

Type:Byte
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-CaaTag

The tag field of the CAA record to add.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-CaaValue

The value field for the CAA record to add.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-CertificateAssociationData

The certificate association data field of the TLSA record to add.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Cname

Specifies the domain name for a canonical name (CNAME) record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-DefaultProfile

The credentials, account, tenant, and subscription used for communication with azure

Type:IAzureContextContainer
Aliases:AzContext, AzureRmContext, AzureCredential
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Digest

The digest field of the DS record to add.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-DigestType

The digest type field of the DS record to add.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Exchange

Specifies the mail exchange server name for a mail exchange (MX) record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Flags

Specifies the flags for a Named Authority Pointer (NAPTR) record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Ipv4Address

Specifies an IPv4 address for an A record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Ipv6Address

Specifies an IPv6 address for an AAAA record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-KeyTag

The key tag field of the DS record to add.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-MatchingType

The matching type field of the TLSA record to add.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Nsdname

Specifies the name server name for a name server (NS) record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Order

Specifies the order for a naming authority pointer (NAPTR) record.

Type:UInt16
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Port

Specifies the port for a service (SRV) record.

Type:UInt16
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Preference

Specifies the preference for an MX/NAPTR record.

Type:UInt16
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Priority

Specifies the priority for an SRV record.

Type:UInt16
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Ptrdname

Specifies the target domain name of a pointer resource (PTR) record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-RecordSet

Specifies the RecordSet object to edit.

Type:DnsRecordSet
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Regexp

Specifies the regexp field for a Named Authority Pointer (NAPTR) record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Replacement

Specifies the replacement field for a Named Authority Pointer (NAPTR) record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Selector

The selector field of the TLSA record to add.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Services

Specifies the services field for a Named Authority Pointer (NAPTR) record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Target

Specifies the target for an SRV record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Usage

The usage field of the TLSA record to add.

Type:Int32
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Value

Specifies the value for a TXT record.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-Weight

Specifies the weight for an SRV record.

Type:UInt16
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

Inputs

DnsRecordSet

String

UInt16

Byte

Outputs

DnsRecordSet