CM_PPPEntries Configuration Service Provider

4/8/2010

The CM_PPPEntries Configuration Service Provider configures the Point-to-Point Protocol (PPP) entries on the device. Settings for RAS connections are defined in this Configuration Service Provider. GPRS connections are configured using the CM_GPRSEntries Configuration Service Provider.

In the root characteristic, the default security roles are defined. The following table shows the default settings.

The following image shows the Configuration Service Provider in tree format as used by OMA Client Provisioning.

Characteristics

• <entryname>
  Specifies the name of the connection. Fields under this characteristic specify parameters for this connection.

  Note

  The operating system does not allow duplicate entry names among the CM_VPNEntries, CM_PPPEntries, and CM_GPRSEntries connection service providers.

• <entryname>/DevSpecificCellular
  Sets parameters in the device-specific structure that is passed by RAS to the cellular TAPI device through lineSetDevConfig before initiating the connection. This characteristic is valid only for connections that use the cellular TAPI service provider.

• <entryname>/DevSpecificUnimodem
  Sets parameters in the device-specific structure that is passed by RAS to the unimodem TAPI device through lineSetDevConfig before initiating the connection. This characteristic is valid only for connections that use the unimodem TAPI service provider.

Parameters

• AltDnsAddr
  This parameter is used in the <entryname> characteristic and is placed in the ipaddrDnsAlt member of the RASENTRY structure. For more information about RASENTRY, see MSDN.

The following table shows the default settings.

• AltWinsAddr
  This parameter is used in the <entryname> characteristic and is placed in the ipaddrWinsAlt member of the RASENTRY structure. For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• AlwaysOn
  Used in the <entryname> characteristic to specify whether the connection supports AlwaysOn. Permitted values are 0 (AlwaysOn not supported) and 1 (AlwaysOn supported).

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• AreaCode
  This parameter is used in the <entryname> characteristic and is placed in the szAreaCode member of the RASENTRY structure. AreaCode specifies the area code portion of the phone number. For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Label	Area code:
  Semantic type	phone-number
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• BearerInfoConnectionElement
  This parameter is used in the <entryname>/DevSpecificCellular characteristic and is placed in the dwConnectionElement member of the CELLDEVCONFIG structure.

  See CELLBEARERINFO for more information about this parameter.

  See GSM specification 07.07 "6.7 Select bearer service type +CBST" for more information. The following table lists the possible values.

  Value	Description
  1	Transparent
  2	NonTransparent
  3	BothTransparent
  4	Both NonTransparent

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• BearerInfoService
  This parameter is used in the <entryname>/DevSpecificCellular characteristic and is placed in the dwService member of the CELLDEVCONFIG structure. Permitted values are one of the CELLDEVCONFIG_SERVICE_* values defined in tsp.h. See GSM specification 07.07 "6.7 Select bearer service type +CBST" for more information. The following table lists the possible values.

  Value	Description
  1	Async Modem
  2	Sync Modem
  3	Async PAD Access
  4	Sync Packet Access

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• BearerInfoSpeed
  This parameter is used in the <entryname>/DevSpecificCellular characteristic and is placed in the dwSpeed member of the CELLDEVCONFIG structure. Permitted values are one of the CELLDEVCONFIG_SPEED_* values defined in tsp.h. See GSM specification 07.07 "6.7 Select bearer service type +CBST" for more information. The following table lists the possible values.

  Value	Description
  1	Auto
  2	300 v21
  3	300 v110
  4	12000 v22
  5	1200/75 v23
  6	1200 v110
  7	1200 v120
  8	2400 v22bis
  9	2400 v26ter
  10	2400 v110
  11	2400 v120
  12	4800 v32
  13	4800 v110
  14	4800 v120
  15	9600 v32
  16	9600 v34
  17	9600 v110
  18	9600 v120
  19	14400 v34
  20	14400 v110
  21	14400 v120
  22	19200 v34
  23	19200 v110
  24	19200 v120
  25	28800 v34
  26	28800 v110
  27	28800 v120
  28	38400 v110
  29	38400 v120
  30	48000 v110
  31	48000 v120
  32	56000 v110
  33	56000 v120
  34	56000 Transparent
  35	64000 Transparent

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• BearerInfoValid
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify whether other bearer information parameters are valid. Permitted values are 0 for OFF or 1 for ON. The value is placed in the bBearerInfoValid member of the CELLDEVCONFIG structure associated with the connection (defined in the tsp.h header file).

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• CompressionInfoDirection
  This parameter is used in the <entryname>/DevSpecificCellular characteristic and is placed in the dwDirection member of the CELLDEVCONFIG structure.

  See CELLDATACOMPINFO for more information about this parameter.

  See "ITU-T Recommendation V.25 ter" Section 6.6.1 for more information. The following table lists the possible values.

  Value	Description
  1	None
  2	Transmit
  3	Receive
  4	Both

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• CompressionInfoMaxDictEntries
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to control the maximum number of dictionary entries for V.42bis data compression. The value is placed in the dwMaxDictEntries member of the CELLDEVCONFIG structure. See "ITU-T Recommendation V.25 ter" Section 6.6.1 for more information.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• CompressionInfoMaxStringLength
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to control the maximum string length for V.42bis data compression. The value is placed in the dwMaxStringLength member of the CELLDEVCONFIG structure. See "ITU-T Recommendation V.25 ter" Section 6.6.1 for more information.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• CompressionInfoRequired
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify whether data compression is required. Permitted values are 0 for OFF or 1 for ON. This value is placed in the dwRequired member of the CELLDEVCONFIG structure. See "ITU-T Recommendation V.25 ter" Section 6.6.1 for more information.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• CompressionInfoValid
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify whether other radio link information parameters are valid. Permitted values are 0 for OFF or 1 for ON. The value is placed in the bDataCompInfoValid member of the

  CELLDEVCONFIG, CELLDATACOMPINFO, CELLGPRSCONNECTIONINFO, and CELLRADIOLINKINFO structures. For more information see, CELLDEVCONFIG, CELLDATACOMPINFO, CELLGPRSCONNECTIONINFO, and CELLRADIOLINKINFO.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• CountryCode
  This numeric parameter is used in the <entryname> characteristic and is placed in the dwCountryCode member of the RASENTRY structure. CountryCode specifies the country/region code portion of the phone number. For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Label	Country/region code:
  Semantic type	phone-number
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• Desc.<langid>
  This parameter is used in the <entryname> characteristic. A tag in the format of Desc.<langid> will be used as the language specific identifier for that entry. For example, the field <parm name="Desc.0409" value="PPP Dialup" /> will force "PPP Dialup" to appear in the UI to represent this connection when the device is set to English language (language ID 0409). Descriptions for multiple languages may be provisioned using this mechanism, and the system will automatically switch among them if the user changes language preferences on the device. If no Desc tag is provisioned for a given language, the system will default to the characteristic tag name used to create the entry.

  The following table shows the default settings.

  Permissions	Read/Write
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• DestId
  This parameter is used in the <entryname> characteristic as a GUID that represents the unique ID of the network to which this entry connects. See the connmgr.h header for predefined GUID values IID_DestNet*.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Label	Connects to
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• DeviceName
  This parameter is used in the <entryname> characteristic and is placed in the szDeviceName member of the RASENTRY structure. DeviceName specifies the local portion of the phone number. For more information about RASENTRY, see MSDN.

  This string contains the name of a TAPI device to use with this phone-book entry, for example "XYZ Corp 28800 External". To enumerate the number of available RAS-capable devices, use the lineInitialize function. For Windows Mobile Standard, by default, this field contains the name of the cellular TAPI device (specified in tsp.h) of "Cellular Line".

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• DeviceSpecificRAW
  This parameter is used in the <entryname> characteristic to allow querying or setting the TAPI device-specific data structure associated with the RAS entry. This duplicates the functionality of the various XML tags under the DevSpecificCellular and DevSpecificUnimodem characteristics, and also allows the setting of the device-specific information for other non-standard TAPI service providers. It should be used with great caution because it allows direct manipulation of the underlying data structures used by the TAPI service provider. The string value is interpreted as a hexadecimal byte stream, for example the string "FFFFFFFF" will set the structure to a single DWORD with all bits set. The resulting structure is passed into the TAPI service provider through lineSetDevConfig each time the connection is brought up.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• DeviceType
  This parameter is used in the <entryname> characteristic and is placed in the szDeviceType member of the RASENTRY structure. The default value for the szDeviceType is "modem". For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• DialAsLocalCall
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_DialAsLocalCall member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this parameter, see MSDN.

  Note

  For cellular devices, this member is typically ignored, and the system is programmed to dial the full canonical number, for example "+<country/region code><area code><local number>".

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• DnsAddr
  This parameter is used in the <entryname> characteristic and is placed in the ipaddrDns member of the RASENTRY structure. For more information about RASENTRY, see MSDN.

The following table shows the default settings.

• Domain
  This parameter is used in the <entryname> characteristic and is placed in the szDomain member of the RASDIALPARAMS structure. This parameter specifies the domain to be used during authentication. For more information about RASDIALPARAMS, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Label	Domain:
  Semantic type	url
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• Enabled
  This parameter can be used in the <entryname> characteristic to enable or disable a connection entry without removing it from the system. The following table lists the possible values.

  Value	Description
  0	The connection entry is disabled
  1	The connection entry is enabled

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• FrameSize
  This parameter is used in the <entryname> characteristic and is placed in the dwFrameSize member of the RASENTRY structure. For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• Framing
  This parameter is used in the <entryname> characteristic and is placed in the dwFramingProtocol member of the RASENTRY structure. For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• IpAddr
  This parameter is used in the <entryname> characteristic and is placed in the ipaddr member of the RASENTRY structure. IpAddr specifies the IP address to be used while this connection is active. This member is ignored unless dwfOptions specifies the RASEO_SpecificIpAddr member. For more information about RASENTRY, see MSDN.

  The following table shows the default settingsfor this parameter.

  Permissions	Read/Write
  Data type	String
  Label	IP address:
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• IpHeaderCompression
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_IpHeaderCompression member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• Password
  This parameter is used in the <entryname> characteristic and is placed in the szPassword member of the RASDIALPARAMS structure. The Password parameter specifies the password to be used during authentication. If left empty, the system will optionally automatically prompt for the user name and password when making a connection. The RequirePw member controls this behavior. Queries of this field will return a string composed of asterisks (*).

  On operations to set the password, passing in this same string will cause the new password to be ignored and will not change the existing password.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Label	Password:
  Semantic type	alphanumeric-password
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• Phone
  This parameter is used in the <entryname> characteristic and is placed in the szLocalPhoneNumber member of the RASENTRY structure. The Phone parameter specifies the local portion of the phone number. For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Label	Phone number:
  Semantic type	phone-number
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RadioLinkInfoAckTimer
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify the value to be placed in the dwAckTimer member of the CELLRADIOLINKINFO structure.

  See GSM specification 07.07 "6.8 Radio link protocol +CRLP" T1 parameter for more information.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RadioLinkInfoIws
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify the value to be placed in the dwIws member of the CELLRADIOLINKINFO. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" iws parameter for more information.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RadioLinkInfoMws
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify the value to be placed in the dwMws member of the CELLRADIOLINKINFO structure. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" mws parameter for more information.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RadioLinkInfoResequenceTimer
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify the value to be placed in the dwResequenceTimer member of the CELLBEARERINFO, CELLDATACOMPINFO, CELLGPRSCONNECTIONINFO, and CELLRADIOLINKINFO structures. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" T4 parameter for more information.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RadioLinkInfoRetransmitAttempts
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify the value to be placed in the dwRetransmitAttempts member of the CELLRADIOLINKINFO structure. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" N2 parameter for more information.

  The following table shows the default setting\.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RadioLinkInfoValid
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify whether other radio link information parameters are valid. Permitted values are 0 for OFF or 1 for ON. The value is placed in the bRadioLinkInfoValid member of the CELLDEVCONFIG structure.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RadioLinkInfoVersion
  This parameter is used in the <entryname>/DevSpecificCellular characteristic to specify the value to be placed in the dwVersion member of the CELLRADIOLINKINFO structure. See GSM specification 07.07 "6.8 Radio link protocol +CRLP" ver parameter for more information.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• ReadOnly
  This parameter is used in the <entryname> characteristic and determines whether users are able to modify PPP connection entries. Permitted values are 0 for false and 1 for true. If the value is set to 1, users will be able to view, but not change, the PPP connection settings on the device.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS

• RemoteDefaultGateway
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_RemoteDefaultGateway member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this parameter, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RequireDataEncryption
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_RequireDataEncryption member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this parameter, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RequireEncryptedPw
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_RequireEncryptedPw member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this parameter, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RequireMsEncryptedPw
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_RequireMsEncryptedPw member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this parameter, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• RequirePw
  This parameter is used in the <entryname> characteristic to control whether the system should prompt for a user name/password/domain name before dialing the phone. If set to a 1, the system will prompt if no password or user name is provisioned. If set to 0, the system will not prompt for a password before dialing even if no password or user name is provisioned. For PPP connections, the default value of this parameter is 1.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Integer
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• Script
  This parameter is used in the <entryname> characteristic and is placed in the szScript member of the RASENTRY structure. The Script parameter specifies a string containing the name of the script file. The file name should be a full path. For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• Secure
  Specifies in the <entryname> characteristic if a connection is more secure. Permitted values are false (not secure) and true (more secure).

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• SpecificIpAddr
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_SpecificIpAddr member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this parameter, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• SpecificNameServers
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_SpecificNameServers member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this parameter, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• SwCompression
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_SwCompression member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this parameter, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• UseCountryAndAreaCodes
  This parameter is used in the <entryname> characteristic to control the setting of the RASEO_UseCountryAndAreaCodes member in the RASENTRY structure. Permitted values are 0 for OFF or 1 for ON. For more information about RASENTRY and the use of this parameter, see MSDN.

  Note

  For cellular devices, this parameter is typically ignored, and the system is programmed to dial the full canonical number, for example "+<country/region code><area code><local number>".

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	Boolean
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• UserName
  This parameter is used in the <entryname> characteristic and is placed in the szUserName member of the RASDIALPARAMS structure. The UserName parameter specifies the user name to be used during authentication. For more information, see PROXY_CONFIG.

  If the Username parameter is left empty, the system will optionally automatically prompt for the user name and password when making a connection. The RequirePw member controls this behavior.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Label	User name:
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

• WinsAddr
  This parameter is used in the <entryname> characteristic and is placed in the ipaddrWins member of the RASENTRY structure. WinsAddr specifies the IP address of the WINS server to be used while this connection is active. This member is ignored unless dwfOptions specifies the RASEO_SpecificNameServers member. For more information about RASENTRY, see MSDN.

  The following table shows the default settings.

  Permissions	Read/Write
  Data type	String
  Roles allowed to query and update setting	Manager Operator TPS AuthenticatedUser

Microsoft Custom Elements

The following table shows the Microsoft custom elements that this Configuration Service Provider supports for OMA Client Provisioning.

Use these elements to build standard OMA Client Provisioning (formerly WAP Client Provisioning) configuration XML. For information about specific elements, see MSPROV DTD Elements. For examples of how to generally use the Microsoft custom elements, see Provisioning XML File Examples.

For information about OMA Client Provisioning, see OMA Client Provisioning Files.

See Also

Tasks

CM_PPPEntries Configuration Service Provider Examples for OMA Client Provisioning

Concepts

Configuration Service Provider Reference for Windows Mobile Devices