ASP.NET Page Life Cycle Overview

When an ASP.NET page runs, the page goes through a life cycle in which it performs a series of processing steps. These include initialization, instantiating controls, restoring and maintaining state, running event handler code, and rendering. It is important for you to understand the page life cycle so that you can write code at the appropriate life-cycle stage for the effect you intend. Additionally, if you develop custom controls, you must be familiar with the page life cycle in order to correctly initialize controls, populate control properties with view-state data, and run any control behavior code. (The life cycle of a control is based on the page life cycle, but the page raises more events for a control than are available for an ASP.NET page alone.)

General Page Life-cycle Stages

In general terms, the page goes through the stages outlined in the following table. In addition to the page life-cycle stages, there are application stages that occur before and after a request but are not specific to a page. For more information, see ASP.NET Application Life Cycle Overview.

Life-cycle Events

Within each stage of the life cycle of a page, the page raises events that you can handle to run your own code. For control events, you bind the event handler to the event, either declaratively using attributes such as onclick, or in code.

Pages also support automatic event wire-up, meaning that ASP.NET looks for methods with particular names and automatically runs those methods when certain events are raised. If the AutoEventWireup attribute of the @ Page directive is set to true (or if it is not defined, since by default it is true), page events are automatically bound to methods that use the naming convention of **Page_**event, such as Page_Load and Page_Init. For more information on automatic event wire-up, see ASP.NET Web Server Control Event Model.

The following table lists the page life-cycle events that you will use most frequently. There are more events than those listed; however, they are not used for most page processing scenarios. Instead, they are primarily used by server controls on the ASP.NET Web page to initialize and render themselves. If you want to write your own ASP.NET server controls, you need to understand more about these stages. For information about creating custom controls, see Developing Custom ASP.NET Server Controls.

Page Event	Typical Use
PreInit	Use this event for the following: Check the IsPostBack property to determine whether this is the first time the page is being processed. Create or re-create dynamic controls. Set a master page dynamically. Set the Theme property dynamically. Read or set profile property values. Note If the request is a postback, the values of the controls have not yet been restored from view state. If you set a control property at this stage, its value might be overwritten in the next event.
Init	Raised after all controls have been initialized and any skin settings have been applied. Use this event to read or initialize control properties.
InitComplete	Raised by the Page object. Use this event for processing tasks that require all initialization be complete.
PreLoad	Use this event if you need to perform processing on your page or control before the Load event. After the Page raises this event, it loads view state for itself and all controls, and then processes any postback data included with the Request instance.
Load	The Page calls the OnLoad event method on the Page, then recursively does the same for each child control, which does the same for each of its child controls until the page and all controls are loaded. Use the OnLoad event method to set properties in controls and establish database connections.
Control events	Use these events to handle specific control events, such as a Button control's Click event or a TextBox control's TextChanged event. Note In a postback request, if the page contains validator controls, check the IsValid property of the Page and of individual validation controls before performing any processing.
LoadComplete	Use this event for tasks that require that all other controls on the page be loaded.
PreRender	Before this event occurs: The Page object calls EnsureChildControls for each control and for the page. Each data bound control whose DataSourceID property is set calls its DataBind method. For more information, see Data Binding Events for Data-Bound Controls below. The PreRender event occurs for each control on the page. Use the event to make final changes to the contents of the page or its controls.
SaveStateComplete	Before this event occurs, ViewState has been saved for the page and for all controls. Any changes to the page or controls at this point will be ignored. Use this event perform tasks that require view state to be saved, but that do not make any changes to controls.
Render	This is not an event; instead, at this stage of processing, the Page object calls this method on each control. All ASP.NET Web server controls have a Render method that writes out the control's markup that is sent to the browser. If you create a custom control, you typically override this method to output the control's markup. However, if your custom control incorporates only standard ASP.NET Web server controls and no custom markup, you do not need to override the Render method. For more information, see Developing Custom ASP.NET Server Controls. A user control (an .ascx file) automatically incorporates rendering, so you do not need to explicitly render the control in code.
Unload	This event occurs for each control and then for the page. In controls, use this event to do final cleanup for specific controls, such as closing control-specific database connections. For the page itself, use this event to do final cleanup work, such as closing open files and database connections, or finishing up logging or other request-specific tasks. Note During the unload stage, the page and its controls have been rendered, so you cannot make further changes to the response stream. If you attempt to call a method such as the Response.Write method, the page will throw an exception.

Additional Page Life Cycle Considerations

Individual ASP.NET server controls have their own life cycle that is similar to the page life cycle. For example, a control's Init and Load events occur during the corresponding page events.

Although both Init and Load recursively occur on each control, they happen in reverse order. The Init event (and also the Unload event) for each child control occur before the corresponding event is raised for its container (bottom-up). However the Load event for a container occurs before the Load events for its child controls (top-down).

You can customize the appearance or content of a control by handling the events for the control, such as the Click event for the Button control and the SelectedIndexChanged event for the ListBox control. Under some circumstances, you might also handle a control's DataBinding or DataBound events. For more information, see the class reference topics for individual controls and Developing Custom ASP.NET Server Controls.

When inheriting a class from the Page class, in addition to handling events raised by the page, you can override methods from the page's base class. For example, you can override the page's InitializeCulture method to dynamically set culture information. Note that when creating an event handler using the **Page_**event syntax, the base implementation is implicitly called and therefore you do not need to call it in your method. For example, the base page class's OnLoad method is always called, whether you create a Page_Load method or not. However, if you override the page OnLoad method with the override keyword (Overrides in Visual Basic), you must explicitly call the base method. For example, if you override the OnLoad method on the page, you must call base.Load (MyBase.Load in Visual Basic) in order for the base implementation to be run.

Catch-up Events for Added Controls

If controls are created dynamically at run time or are authored declaratively within templates of data-bound controls, their events are initially not synchronized with those of other controls on the page. For example, for a control that is added at run time, the Init and Load events might occur much later in the page life cycle than the same events for controls created declaratively. Therefore, from the time that they are instantiated, dynamically added controls and controls in templates raise their events one after the other until they have caught up to the event during which it was added to the Controls collection.

In general, you do not need to be concerned about this unless you have nested data-bound controls. If a child control has been data bound, but its container control has not yet been data bound, the data in the child control and the data in its container control can be out of sync. This is true particularly if the data in the child control performs processing based on a data-bound value in the container control.

For example, suppose you have a GridView that displays a company record in each row along with a list of the company officers in a ListBox control. To fill the list of officers, you would bind the ListBox control to a data source control (such as SqlDataSource) that retrieves the company officer data using the CompanyID in a query.

If the ListBox control's data-binding properties, such as DataSourceID and DataMember, are set declaratively, the ListBox control will try to bind to its data source during the containing row's DataBinding event. However, the CompanyID field of the row does not contain a value until the GridView control's RowDataBound event occurs. In this case, the child control (the ListBox control) is bound before the containing control (the GridView control) is bound, so their data-binding stages are out of sync.

To avoid this condition, put the data source control for the ListBox control in the same template item as the ListBox control itself, and do not set the data binding properties of the ListBox declaratively. Instead, set them programmatically at run time during the RowDataBound event, so that the ListBox control does not bind to its data until the CompanyID information is available.

For more information, see Binding to Data Using a Data Source Control.

Data Binding Events for Data-Bound Controls

To help you understand the relationship between the page life cycle and data binding events, the following table lists data-related events in data-bound controls such as the GridView, DetailsView, and FormView controls.

Login Control Events

The Login control can use settings in the Web.config file to manage membership authentication automatically. However, if your application requires you to customize how the control works, or if you want to understand how Login control events relate to the page life cycle, you can use the events listed in the following table.

See Also

Reference

Validating User Input in ASP.NET Web Pages
ASP.NET Login Controls Overview

Concepts

ASP.NET Web Server Control Event Model
Page and Application Context in ASP.NET Web Applications
View State Overview
Binding to Data Using a Data Source Control

Other Resources

Developing Custom ASP.NET Server Controls
ASP.NET Page Syntax
Server Event Handling in ASP.NET Web Pages