AnalysisStatusBase, classe
Mise à jour : November 2007
Classe de base pour AnalysisStatus. Représente l'état de l'analyse et indique si elle s'est déroulée correctement et si des avertissements ont été émis.
Espace de noms : System.Windows.Ink.AnalysisCore
Assembly : IACore (dans IACore.dll)
Syntaxe
'Déclaration
Public Class AnalysisStatusBase
'Utilisation
Dim instance As AnalysisStatusBase
public class AnalysisStatusBase
public ref class AnalysisStatusBase
public class AnalysisStatusBase
public class AnalysisStatusBase
Exemples
L'exemple suivant montre comment rechercher des avertissements suite à une analyse d'entrée manuscrite. En exécutant l'analyse à l'aide du module de reconnaissance de l'afrikaans, que vous n'avez sans doute pas installé, vous pouvez voir que l'analyse échoue et qu'un avertissement InkRecognizerInitializationFailed est émis.
' Analyze using Afrikaans recognizer.
' You are unlikely to have this recognizer, so it will raise a warning.
Dim afrikaansAnalyzer As New InkAnalyzerBase()
Dim afrikaansLanguageId As Integer = 1078
' Accumulate the stroke data in collections.
Dim thePacketDescription() As Guid = theInkCollector.Ink.Strokes(0).PacketDescription
Dim theStrokeIdentifiers As ArrayList = New ArrayList()
Dim thePacketCounts As ArrayList = New ArrayList()
Dim thePacketData As ArrayList = New ArrayList()
Dim aStroke As Stroke
For Each aStroke In theInkCollector.Ink.Strokes
' Add the stroke data to the collections.
theStrokeIdentifiers.Add(aStroke.Id)
thePacketCounts.Add(aStroke.PacketCount)
thePacketData.AddRange(aStroke.GetPacketData())
Next
' Add the stroke data to the base layer ink analyzer.
afrikaansAnalyzer.AddStrokes( _
theStrokeIdentifiers.ToArray(GetType(Integer())), _
thePacketCounts.ToArray(GetType(Integer())), _
thePacketData.ToArray(GetType(Integer())), _
thePacketDescription)
Dim status As AnalysisStatusBase = afrikaansAnalyzer.Analyze()
' Display any warnings
If status.Warnings.Count > 0 Then
' Initialize warning message
Dim message As String = "Analysis resulted in the following warnings:" & Environment.NewLine
' Note: We should only expect to see the BackgroundException warning if
' we were performing background analysis.
' Loop through warnings
Dim warning As AnalysisWarningBase
For Each warning In status.Warnings
Select Case warning.WarningCode
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.Aborted
message = message & "Analysis operation was aborted. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.BackgroundException
' This is a fatal warning. Throw an exception.
' First, attempt to save as much document state as possible
' ...
' Rethrow the exception so that it can be caught by an exception
' handler (or if there is no exception handler, a program error
' debugger such as Dr. Watson can be invoked)
Throw (warning.BackgroundException)
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.ConfirmedWithoutInkRecognition
message = message & "Node was confirmed without ink recognition having been performed. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.ContextNodeLocationNotSet
message = message & "Node does not have a proper location set. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.FactoidCoercionNotSupported
message = message & "Factoid coercion failed "
If (Not warning.AnalysisHint Is Nothing) AndAlso _
warning.AnalysisHint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.Factoid) Then
message = message & "for factoid: " & _
CType(warning.AnalysisHint.GetPropertyData( _
PropertyGuidsForAnalysisHintsBase.Factoid), String) & ". "
End If
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.FactoidNotSupported
If (Not warning.AnalysisHint Is Nothing) AndAlso _
warning.AnalysisHint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.Factoid) Then
message = message & _
CType(warning.AnalysisHint.GetPropertyData( _
PropertyGuidsForAnalysisHintsBase.Factoid), String) & _
" factoid was not respected. "
End If
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.GuideNotSupported
message = message & "Guide was not respected. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.AddInkToRecognizerFailed
message = message & "Ink could not be added to the InkRecognizer. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.InkRecognizerInitializationFailed
message = message & "The InkRecognizer failed to initialize. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.NoMatchingInkRecognizerFound
message = message & "There are no ink recognizers meeting the language or capabilities needed. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.LanguageIdNotRespected
message = message & "The language ID set on a stroke did not match the language ID of the InkRecognizer. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.PartialDictionaryTermsNotSupported
message = message & "Partial dictionary terms could not be returned from the text recognizer. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.SetPrefixSuffixFailed
message = message & "The text recognizer was unable to respect either the prefix or suffix. "
If (Not warning.AnalysisHint Is Nothing) AndAlso _
warning.AnalysisHint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.PrefixText) Then
message = message & "Prefix: " & _
warning.AnalysisHint.GetPropertyData(PropertyGuidsForAnalysisHintsBase.PrefixText) _
& ". "
End If
If (Not warning.AnalysisHint Is Nothing) AndAlso _
warning.AnalysisHint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.SuffixText) Then
message = message & "Suffix: " & _
warning.AnalysisHint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.SuffixText) _
& ". "
End If
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.WordlistNotSupported
message = message & "Wordlist was not respected. "
Case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.WordModeNotSupported
message = message & "Word mode was not respected. "
End Select
' Add node id information
Dim id As Guid
For Each id In warning.GetNodeIds()
message = message & "Id: " & id.ToString() & " "
Next id
' Add hint information
If Not (warning.AnalysisHint Is Nothing) Then
Dim hint As ContextNodeBase = warning.AnalysisHint
message = message & Environment.NewLine & "Hint information: "
message = message & "AllowPartialDictionaryTerms"
If hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.AllowPartialDictionaryTerms) Then
message = message & " = " & _
hint.GetPropertyData( _
PropertyGuidsForAnalysisHintsBase.AllowPartialDictionaryTerms).ToString()
Else
message = message & " = False "
End If
message = message & "CoerceToFactoid"
If hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.CoerceToFactoid) Then
message = message & " = " & _
hint.GetPropertyData( _
PropertyGuidsForAnalysisHintsBase.CoerceToFactoid).ToString()
Else
message = message & " = False "
End If
If hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.Factoid) Then
message = message & "Factoid = " & _
warning.AnalysisHint.GetPropertyData(PropertyGuidsForAnalysisHintsBase.Factoid) & " "
End If
If hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.Guide) Then
Dim theInkRecognizerGuideBase As InkRecognizerGuideBase = _
CType(hint.GetPropertyData(PropertyGuidsForAnalysisHintsBase.Guide), _
InkRecognizerGuideBase)
message += "Guide Drawn Box = {" & theInkRecognizerGuideBase.DrawnBoxLeft.ToString() _
& ", " & theInkRecognizerGuideBase.DrawnBoxTop.ToString() _
& ", " & theInkRecognizerGuideBase.DrawnBoxRight.ToString() _
& ", " & theInkRecognizerGuideBase.DrawnBoxBottom.ToString() _
& ")"
message &= "Guide Writing Box = {" & theInkRecognizerGuideBase.WritingBoxLeft.ToString() _
& ", " & theInkRecognizerGuideBase.WritingBoxTop.ToString() _
& ", " & theInkRecognizerGuideBase.WritingBoxRight.ToString() _
& ", " & theInkRecognizerGuideBase.WritingBoxBottom.ToString() _
& ")"
message = message & String.Format("Guide = ({0}, {1})", _
theInkRecognizerGuideBase.Columns, theInkRecognizerGuideBase.Rows)
End If
If hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.Name) Then
message = message & "Name = " & _
CType(warning.AnalysisHint.GetPropertyData(PropertyGuidsForAnalysisHintsBase.Name), String) _
& " "
End If
If Not hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.PrefixText) Then
message = message & "PrefixText = " & _
CType(warning.AnalysisHint.GetPropertyData(PropertyGuidsForAnalysisHintsBase.PrefixText), String) _
& " "
End If
If Not hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.SuffixText) Then
message = message & "SuffixText = " & _
CType(warning.AnalysisHint.GetPropertyData(PropertyGuidsForAnalysisHintsBase.SuffixText), String) _
& " "
End If
message = message & "WordMode"
If hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.WordMode) Then
message = message & " = " & _
CType(hint.GetPropertyData(PropertyGuidsForAnalysisHintsBase.WordMode), String)
Else
message = message & " = False"
End If
End If
message = message & Environment.NewLine
Next warning
' Show in the output window
System.Diagnostics.Debug.WriteLine(message)
End If
If status.Successful Then
Me.labelResult.Text = afrikaansAnalyzer.GetRecognizedString()
End If
// Analyze using Afrikaans recognizer.
// You are unlikely to have this recognizer, so it will raise a warning.
InkAnalyzerBase afrikaansInkAnalyzer = new InkAnalyzerBase();
int afrikaansLanguageId = 1078;
// Accumulate the stroke data in collections.
Guid[] thePacketDescription = theInkCollector.Ink.Strokes[0].PacketDescription;
ArrayList theStrokeIdentifiers = new ArrayList();
ArrayList thePacketCounts = new ArrayList();
ArrayList thePacketData = new ArrayList();
foreach (Stroke aStroke in theInkCollector.Ink.Strokes)
{
// Add the stroke data to the collections.
theStrokeIdentifiers.Add(aStroke.Id);
thePacketCounts.Add(aStroke.PacketCount);
thePacketData.AddRange(aStroke.GetPacketData());
}
// Add the stroke data to the base layer ink analyzer.
afrikaansInkAnalyzer.AddStrokes(
theStrokeIdentifiers.ToArray(typeof(int)) as int[],
thePacketCounts.ToArray(typeof(int)) as int[],
thePacketData.ToArray(typeof(int)) as int[],
thePacketDescription);
AnalysisStatusBase status = afrikaansInkAnalyzer.Analyze();
// Note: We should only expect to see the BackgroundException warning if
// we were performing background analysis.
// Display any warnings
if (!status.Successful)
{
// Initialize warning message
string message = "Analysis resulted in the following warnings:" + Environment.NewLine;
// Loop through warnings
foreach (AnalysisWarningBase warning in status.Warnings)
{
switch (warning.WarningCode)
{
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.Aborted:
message += "Analysis operation was aborted. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.BackgroundException:
// This is a fatal warning. Throw an exception.
// First, attempt to save as much doc state as possible
// ...
// Rethrow the exception so that it can be caught by an exception
// handler (or if there is no exception handler, a program error
// debugger such as Dr. Watson can be invoked)
throw(warning.BackgroundException);
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.ConfirmedWithoutInkRecognition:
message += "Node was confirmed without ink recognition having been performed. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.ContextNodeLocationNotSet:
message += "Node does not have a proper location set. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.FactoidCoercionNotSupported:
message += "Factoid coercion failed ";
if (warning.AnalysisHint != null &&
warning.AnalysisHint.ContainsPropertyData(
PropertyGuidsForAnalysisHintsBase.Factoid))
{
message += "for factoid: " +
(string) warning.AnalysisHint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.Factoid) + ". ";
}
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.FactoidNotSupported:
if (warning.AnalysisHint != null &&
warning.AnalysisHint.ContainsPropertyData(
PropertyGuidsForAnalysisHintsBase.Factoid))
{
message +=
(string)warning.AnalysisHint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.Factoid)
+ " factoid was not respected. ";
}
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.GuideNotSupported:
message += "Guide was not respected. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.AddInkToRecognizerFailed:
message += "Ink could not be added to the InkRecognizer. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.InkRecognizerInitializationFailed:
message += "The InkRecognizer failed to initialize. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.NoMatchingInkRecognizerFound:
message += "There are no ink recognizers meeting the language or capabilities needed. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.LanguageIdNotRespected:
message += "The language ID set on a stroke did not match the language ID of the InkRecognizer. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.PartialDictionaryTermsNotSupported:
message += "Partial dictionary terms could not be returned from the text recognizer. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.SetPrefixSuffixFailed:
message += "The text recognizer was unable to respect either the prefix or suffix. ";
if (warning.AnalysisHint != null &&
warning.AnalysisHint.ContainsPropertyData(
PropertyGuidsForAnalysisHintsBase.PrefixText))
{
message += "Prefix: " +
warning.AnalysisHint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.PrefixText) + ". ";
}
if (warning.AnalysisHint != null &&
warning.AnalysisHint.ContainsPropertyData(
PropertyGuidsForAnalysisHintsBase.SuffixText))
{
message += "Suffix: " +
warning.AnalysisHint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.SuffixText) + ". ";
}
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.WordlistNotSupported:
message += "Wordlist was not respected. ";
break;
case System.Windows.Ink.AnalysisCore.AnalysisWarningCode.WordModeNotSupported:
message += "Word mode was not respected. ";
break;
}
// Add node id information
foreach (Guid id in warning.GetNodeIds())
message += "Id: " + id.ToString() + " ";
// Add hint information
if (warning.AnalysisHint != null)
{
ContextNodeBase hint = warning.AnalysisHint;
message += Environment.NewLine + "Hint information: ";
message += "AllowPartialDictionaryTerms";
if (hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.AllowPartialDictionaryTerms))
message += " = " +
((bool)hint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.AllowPartialDictionaryTerms)).ToString();
else
message += " = false ";
message += "CoerceToFactoid";
if (hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.CoerceToFactoid))
message += " = " +
((bool)hint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.CoerceToFactoid)).ToString();
else
message += " = false ";
if (hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.Factoid))
message += "Factoid = " +
(string) warning.AnalysisHint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.Factoid) + " ";
if (hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.Guide))
{
InkRecognizerGuideBase theInkRecognizerGuideBase =
(InkRecognizerGuideBase) hint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.Guide);
message += "Guide Drawn Box = {" + theInkRecognizerGuideBase.DrawnBoxLeft.ToString()
+ ", " + theInkRecognizerGuideBase.DrawnBoxTop.ToString()
+ ", " + theInkRecognizerGuideBase.DrawnBoxRight.ToString()
+ ", " + theInkRecognizerGuideBase.DrawnBoxBottom.ToString()
+ ")";
message += "Guide Writing Box = {" + theInkRecognizerGuideBase.WritingBoxLeft.ToString()
+ ", " + theInkRecognizerGuideBase.WritingBoxTop.ToString()
+ ", " + theInkRecognizerGuideBase.WritingBoxRight.ToString()
+ ", " + theInkRecognizerGuideBase.WritingBoxBottom.ToString()
+ ")";
}
if (hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.Name))
message += "Name = " +
(string) warning.AnalysisHint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.Name);
if (hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.PrefixText))
message += "PrefixText = " +
(string) warning.AnalysisHint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.PrefixText) + " ";
if (hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.SuffixText))
message += "SuffixText = " +
(string) warning.AnalysisHint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.SuffixText) + " ";
message += "WordMode";
if (hint.ContainsPropertyData(PropertyGuidsForAnalysisHintsBase.WordMode))
message += " = " +
((bool) hint.GetPropertyData(
PropertyGuidsForAnalysisHintsBase.WordMode)).ToString();
else
message += " = false";
}
message += Environment.NewLine;
}
// Show in the output window
System.Diagnostics.Debug.WriteLine(message);
}
if (status.Successful)
{
this.resultsLabel.Text = afrikaansInkAnalyzer.GetRecognizedString();
}
Hiérarchie d'héritage
System.Object
System.Windows.Ink.AnalysisCore.AnalysisStatusBase
Sécurité des threads
Tous les membres static (Shared en Visual Basic) publics de ce type sont thread-safe. Il n'est pas garanti que les membres d'instance soient thread-safe.
Plateformes
Windows Vista, Windows XP SP2, Windows Server 2003
Le .NET Framework et le .NET Compact Framework ne prennent pas en charge toutes les versions de chaque plateforme. Pour obtenir la liste des versions prises en charge, consultez Configuration requise du .NET Framework.
Informations de version
.NET Framework
Pris en charge dans : 3.0