Comment : échanger des messages en file d'attente avec des points de terminaison WCF

Article
02/27/2011

Les files d'attente garantissent une messagerie fiable entre un client et un service Windows Communication Foundation (WCF), même si le service n'est pas disponible au moment de la communication. Les procédures ci-dessous indiquent comment garantir une communication durable entre un client et un service en utilisant la liaison mise en file d'attente standard lors de l'implémentation du service WCF.

Cette section explique comment utiliser NetMsmqBinding pour la communication mise en file d'attente entre un client WCF et un service WCF.

Pour utiliser la mise en file d'attente dans un service WCF

Définissez un contrat de service utilisant une interface marquée avec ServiceContractAttribute. Marquez les opérations dans l'interface qui font partie du contrat de service avec OperationContractAttribute et définissez-les comme unidirectionnelles car aucune réponse n'est retournée à la méthode. Le code ci-dessous fournit un exemple de contrat de service et sa définition d'opération.

<ServiceContract(Namespace:="http://Microsoft.ServiceModel.Samples")> _
Public Interface IOrderProcessor
    <OperationContract(IsOneWay := True)> _
    Sub SubmitPurchaseOrder(ByVal po As PurchaseOrder)
End Interface

[ServiceContract(Namespace="http://Microsoft.ServiceModel.Samples")]
public interface IOrderProcessor
{
    [OperationContract(IsOneWay = true)]
    void SubmitPurchaseOrder(PurchaseOrder po);
}

Lorsque le contrat de service passe des types définis par l'utilisateur, vous devez définir des contrats de données pour ces types. Le code suivant présente deux contrats de données, PurchaseOrder et PurchaseOrderLineItem. Ces deux types définissent les données qui sont envoyées au service. (Notez que les classes qui définissent ce contrat de données définissent également plusieurs méthodes. Ces méthodes ne sont pas considérées comme des parties intégrantes du contrat de données. Seuls les membres déclarés avec l'attribut DataMember font partie du contrat de données.)

<DataContract(Namespace := "http://Microsoft.ServiceModel.Samples")> _
Public Class PurchaseOrder
    Private Shared ReadOnly OrderStates() As String = { "Pending", "Processed", "Shipped" }
    Private Shared statusIndexer As New Random(137)

    <DataMember> _
    Public PONumber As String

    <DataMember> _
    Public CustomerId As String

    <DataMember> _
    Public orderLineItems() As PurchaseOrderLineItem

    Public ReadOnly Property TotalCost() As Single
        Get
            Dim totalCost_Renamed As Single = 0
            For Each lineItem In orderLineItems
                totalCost_Renamed += lineItem.TotalCost
            Next lineItem
            Return totalCost_Renamed
        End Get
    End Property

    Public ReadOnly Property Status() As String
        Get
            Return OrderStates(statusIndexer.Next(3))
        End Get
    End Property

    Public Overrides Function ToString() As String
        Dim strbuf As New System.Text.StringBuilder("Purchase Order: " & PONumber & Constants.vbLf)
        strbuf.Append(Constants.vbTab & "Customer: " & CustomerId & Constants.vbLf)
        strbuf.Append(Constants.vbTab & "OrderDetails" & Constants.vbLf)

        For Each lineItem In orderLineItems
            strbuf.Append(Constants.vbTab + Constants.vbTab + lineItem.ToString())
        Next lineItem

        strbuf.Append(Constants.vbTab & "Total cost of this order: $" & TotalCost + Constants.vbLf)
        strbuf.Append(Constants.vbTab & "Order status: " & Status + Constants.vbLf)
        Return strbuf.ToString()
    End Function
End Class

[DataContract(Namespace = "http://Microsoft.ServiceModel.Samples")]
public class PurchaseOrder
{
    static readonly string[] OrderStates = { "Pending", "Processed", "Shipped" };
    static Random statusIndexer = new Random(137);

    [DataMember]
    public string PONumber;

    [DataMember]
    public string CustomerId;

    [DataMember]
    public PurchaseOrderLineItem[] orderLineItems;

    public float TotalCost
    {
        get
        {
            float totalCost = 0;
            foreach (PurchaseOrderLineItem lineItem in orderLineItems)
                totalCost += lineItem.TotalCost;
            return totalCost;
        }
    }

    public string Status
    {
        get 
        {
            return OrderStates[statusIndexer.Next(3)];
        }
    }

    public override string ToString()
    {
        System.Text.StringBuilder strbuf = new System.Text.StringBuilder("Purchase Order: " + PONumber + "\n");
        strbuf.Append("\tCustomer: " + CustomerId + "\n");
        strbuf.Append("\tOrderDetails\n");

        foreach (PurchaseOrderLineItem lineItem in orderLineItems)
        {
            strbuf.Append("\t\t" + lineItem.ToString());
        }

        strbuf.Append("\tTotal cost of this order: $" + TotalCost + "\n");
        strbuf.Append("\tOrder status: " + Status + "\n");
        return strbuf.ToString();
    }
}

Implémentez dans une classe les méthodes du contrat de service définies dans l'interface.

Public Class OrderProcessorService
    Implements IOrderProcessor
    <OperationBehavior(TransactionScopeRequired := True, TransactionAutoComplete := True)> _
    Public Sub SubmitPurchaseOrder(ByVal po As PurchaseOrder) Implements IOrderProcessor.SubmitPurchaseOrder
        Orders.Add(po)
        Console.WriteLine("Processing {0} ", po)
    End Sub
End Class

public class OrderProcessorService : IOrderProcessor
{
    [OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
    public void SubmitPurchaseOrder(PurchaseOrder po)
    {
        Orders.Add(po);
        Console.WriteLine("Processing {0} ", po);
    }
}

Notez OperationBehaviorAttribute qui est placé sur la méthode SubmitPurchaseOrder. Cela indique que cette opération doit être appelée au sein d'une transaction et que la transaction se termine automatiquement à la fin de la méthode.

Créez une file d'attente transactionnelle en utilisant System.Messaging. Vous pouvez éventuellement décider de créer la file d'attente à l'aide de la console MMC (Microsoft Management Console) MSMQ (Microsoft Message Queuing). Dans ce cas, assurez-vous de créer une file d'attente transactionnelle.
```
' Create the transacted MSMQ queue if necessary.
If (Not MessageQueue.Exists(queueName)) Then
    MessageQueue.Create(queueName, True)
End If
```
```
// Create the transacted MSMQ queue if necessary.
if (!MessageQueue.Exists(queueName))
    MessageQueue.Create(queueName, true);
```

Définissez un ServiceEndpoint dans la configuration qui spécifie l'adresse de service et utilise la liaison NetMsmqBinding standard. Pour plus d'informations sur le sujet suivant l'utilisation de la configuration WCF, consultez Configuring Windows Communication Foundation Applications.

<services>
  <service 
      name="Microsoft.ServiceModel.Samples.OrderProcessorService"
      behaviorConfiguration="CalculatorServiceBehavior">
    <host>
      <baseAddresses>
        <add baseAddress="https://localhost:8000/ServiceModelSamples/service"/>
      </baseAddresses>
    </host>
    <!-- Define NetMsmqEndpoint -->
    <endpoint address="net.msmq://localhost/private/ServiceModelSamplesTransacted"
              binding="netMsmqBinding"
              contract="Microsoft.ServiceModel.Samples.IOrderProcessor" />
    <!-- the mex endpoint is exposed at https://localhost:8000/ServiceModelSamples/service/mex -->
    <endpoint address="mex"
              binding="mexHttpBinding"
              contract="IMetadataExchange" />
  </service>
</services>

Créez un hôte pour le service OrderProcessing à l'aide de ServiceHost qui lit les messages de la file d'attente et les traite. Ouvrez l'hôte de service pour rendre le service disponible. Affichez un message qui indique à l'utilisateur d'appuyer sur une touche quelconque pour terminer le service. Appelez ReadLine pour attendre l'appui sur la touche, puis fermez le service.

' Create a ServiceHost for the OrderProcessorService type.
Using serviceHost As New ServiceHost(GetType(OrderProcessorService))
    ' Open the ServiceHost to create listeners and start listening for messages.
    serviceHost.Open()

    ' The service can now be accessed.
    Console.WriteLine("The service is ready.")
    Console.WriteLine("Press <ENTER> to terminate service.")
    Console.WriteLine()
    Console.ReadLine()

    ' Close the ServiceHostB to shutdown the service.
    serviceHost.Close()
End Using

// Create a ServiceHost for the OrderProcessorService type.
using (ServiceHost serviceHost = new ServiceHost(typeof(OrderProcessorService)))
{
    // Open the ServiceHost to create listeners and start listening for messages.
    serviceHost.Open();

    // The service can now be accessed.
    Console.WriteLine("The service is ready.");
    Console.WriteLine("Press <ENTER> to terminate service.");
    Console.WriteLine();
    Console.ReadLine();

    // Close the ServiceHostB to shutdown the service.
    serviceHost.Close();
}

Pour créer un client pour le service mis en file d'attente

L'exemple suivant montre comment exécuter l'application d'hébergement et utiliser l'outil Svcutil.exe pour créer le client WCF.
```
svcutil https://localhost:8000/ServiceModelSamples/service
```

Définissez un ServiceEndpoint dans la configuration qui spécifie l'adresse et utilise la liaison NetMsmqBinding standard, comme illustré dans l'exemple suivant.

<client>
  <!-- Define NetMsmqEndpoint -->
  <endpoint address="net.msmq://localhost/private/ServiceModelSamplesTransacted" 
            binding="netMsmqBinding" 
            contract="Microsoft.ServiceModel.Samples.IOrderProcessor" />
</client>

Créez une étendue de transaction pour écrire dans la file d'attente transactionnelle, appelez l'opération SubmitPurchaseOrder et fermez le client WCF, comme illustré dans l'exemple suivant.

'Create a transaction scope.
Using scope As New TransactionScope(TransactionScopeOption.Required)
    ' Make a queued call to submit the purchase order.
    client.SubmitPurchaseOrder(po)
    ' Complete the transaction.
    scope.Complete()
End Using

'Closing the client gracefully closes the connection and cleans up resources.
client.Close()

//Create a transaction scope.
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required))
{
    // Make a queued call to submit the purchase order.
    client.SubmitPurchaseOrder(po);
    // Complete the transaction.
    scope.Complete();
}

//Closing the client gracefully closes the connection and cleans up resources.
client.Close();

Exemple

Les exemples suivants montrent le code de service, l'application d'hébergement, le fichier App.config et le code client inclus pour cet exemple.

' This is the service code
'  Copyright (c) Microsoft Corporation.  All Rights Reserved.

Imports System
Imports System.ServiceModel.Channels
Imports System.Configuration
Imports System.Messaging
Imports System.ServiceModel
Imports System.Transactions
Imports System.Runtime.Serialization
Imports System.Collections.Generic

Namespace Microsoft.ServiceModel.Samples
    ' Define the purchase order line item.
    <DataContract(Namespace := "http://Microsoft.ServiceModel.Samples")> _
    Public Class PurchaseOrderLineItem
        <DataMember> _
        Public ProductId As String

        <DataMember> _
        Public UnitCost As Single

        <DataMember> _
        Public Quantity As Integer

        Public Overrides Function ToString() As String
            Dim displayString As String = "Order LineItem: " & Quantity & " of " & ProductId & " @unit price: $" & UnitCost + Constants.vbLf
            Return displayString
        End Function

        Public ReadOnly Property TotalCost() As Single
            Get
                Return UnitCost * Quantity
            End Get
        End Property
    End Class

    ' Define the purchase order.
    <DataContract(Namespace := "http://Microsoft.ServiceModel.Samples")> _
    Public Class PurchaseOrder
        Private Shared ReadOnly OrderStates() As String = { "Pending", "Processed", "Shipped" }
        Private Shared statusIndexer As New Random(137)

        <DataMember> _
        Public PONumber As String

        <DataMember> _
        Public CustomerId As String

        <DataMember> _
        Public orderLineItems() As PurchaseOrderLineItem

        Public ReadOnly Property TotalCost() As Single
            Get
                Dim totalCost_Renamed As Single = 0
                For Each lineItem In orderLineItems
                    totalCost_Renamed += lineItem.TotalCost
                Next lineItem
                Return totalCost_Renamed
            End Get
        End Property

        Public ReadOnly Property Status() As String
            Get
                Return OrderStates(statusIndexer.Next(3))
            End Get
        End Property

        Public Overrides Function ToString() As String
            Dim strbuf As New System.Text.StringBuilder("Purchase Order: " & PONumber & Constants.vbLf)
            strbuf.Append(Constants.vbTab & "Customer: " & CustomerId & Constants.vbLf)
            strbuf.Append(Constants.vbTab & "OrderDetails" & Constants.vbLf)

            For Each lineItem In orderLineItems
                strbuf.Append(Constants.vbTab + Constants.vbTab + lineItem.ToString())
            Next lineItem

            strbuf.Append(Constants.vbTab & "Total cost of this order: $" & TotalCost + Constants.vbLf)
            strbuf.Append(Constants.vbTab & "Order status: " & Status + Constants.vbLf)
            Return strbuf.ToString()
        End Function
    End Class

    ' Order Processing Logic
    ' Can replace with transaction-aware resource such as SQL or transacted hashtable to hold the purchase orders.
    ' This example uses a non-transactional resource.
    Public Class Orders
        Private Shared purchaseOrders As New Dictionary(Of String, PurchaseOrder)()

        Public Shared Sub Add(ByVal po As PurchaseOrder)
            purchaseOrders.Add(po.PONumber, po)
        End Sub

        Public Shared Function GetOrderStatus(ByVal poNumber As String) As String
            Dim po As PurchaseOrder = Nothing
            If purchaseOrders.TryGetValue(poNumber, po) Then
                Return po.Status
            Else
                Return Nothing
            End If
        End Function

        Public Shared Sub DeleteOrder(ByVal poNumber As String)
            If purchaseOrders(poNumber) IsNot Nothing Then
                purchaseOrders.Remove(poNumber)
            End If
        End Sub
    End Class

    ' Define a service contract. 
    <ServiceContract(Namespace:="http://Microsoft.ServiceModel.Samples")> _
    Public Interface IOrderProcessor
        <OperationContract(IsOneWay := True)> _
        Sub SubmitPurchaseOrder(ByVal po As PurchaseOrder)
    End Interface

    ' Service class that implements the service contract.
    ' Added code to write output to the console window.
    Public Class OrderProcessorService
        Implements IOrderProcessor
        <OperationBehavior(TransactionScopeRequired := True, TransactionAutoComplete := True)> _
        Public Sub SubmitPurchaseOrder(ByVal po As PurchaseOrder) Implements IOrderProcessor.SubmitPurchaseOrder
            Orders.Add(po)
            Console.WriteLine("Processing {0} ", po)
        End Sub
    End Class
End Namespace

// This is the service code
//  Copyright (c) Microsoft Corporation.  All Rights Reserved.

using System;
using System.ServiceModel.Channels;
using System.Configuration;
using System.Messaging;
using System.ServiceModel;
using System.Transactions;
using System.Runtime.Serialization;
using System.Collections.Generic;

namespace Microsoft.ServiceModel.Samples
{
    // Define the purchase order line item.
    [DataContract(Namespace = "http://Microsoft.ServiceModel.Samples")]
    public class PurchaseOrderLineItem
    {
        [DataMember]
        public string ProductId;

        [DataMember]
        public float UnitCost;

        [DataMember]
        public int Quantity;

        public override string ToString()
        {
            String displayString = "Order LineItem: " + Quantity + " of "  + ProductId + " @unit price: $" + UnitCost + "\n";
            return displayString;
        }

        public float TotalCost
        {
            get { return UnitCost * Quantity; }
        }
    }

    // Define the purchase order.
    [DataContract(Namespace = "http://Microsoft.ServiceModel.Samples")]
    public class PurchaseOrder
    {
        static readonly string[] OrderStates = { "Pending", "Processed", "Shipped" };
        static Random statusIndexer = new Random(137);

        [DataMember]
        public string PONumber;

        [DataMember]
        public string CustomerId;

        [DataMember]
        public PurchaseOrderLineItem[] orderLineItems;

        public float TotalCost
        {
            get
            {
                float totalCost = 0;
                foreach (PurchaseOrderLineItem lineItem in orderLineItems)
                    totalCost += lineItem.TotalCost;
                return totalCost;
            }
        }

        public string Status
        {
            get 
            {
                return OrderStates[statusIndexer.Next(3)];
            }
        }

        public override string ToString()
        {
            System.Text.StringBuilder strbuf = new System.Text.StringBuilder("Purchase Order: " + PONumber + "\n");
            strbuf.Append("\tCustomer: " + CustomerId + "\n");
            strbuf.Append("\tOrderDetails\n");

            foreach (PurchaseOrderLineItem lineItem in orderLineItems)
            {
                strbuf.Append("\t\t" + lineItem.ToString());
            }

            strbuf.Append("\tTotal cost of this order: $" + TotalCost + "\n");
            strbuf.Append("\tOrder status: " + Status + "\n");
            return strbuf.ToString();
        }
    }

    // Order Processing Logic
    // Can replace with transaction-aware resource such as SQL or transacted hashtable to hold the purchase orders.
    // This example uses a non-transactional resource.
    public class Orders
    {
        static Dictionary<string, PurchaseOrder> purchaseOrders = new Dictionary<string, PurchaseOrder>();

        public static void Add(PurchaseOrder po)
        {
            purchaseOrders.Add(po.PONumber, po);
        }

        public static string GetOrderStatus(string poNumber)
        {
            PurchaseOrder po;
            if (purchaseOrders.TryGetValue(poNumber, out po))
                return po.Status;
            else
                return null;
        }

        public static void DeleteOrder(string poNumber)
        {
            if(purchaseOrders[poNumber] != null)
                purchaseOrders.Remove(poNumber);
        }
    }

    // Define a service contract. 
    [ServiceContract(Namespace="http://Microsoft.ServiceModel.Samples")]
    public interface IOrderProcessor
    {
        [OperationContract(IsOneWay = true)]
        void SubmitPurchaseOrder(PurchaseOrder po);
    }

    // Service class that implements the service contract.
    // Added code to write output to the console window.
    public class OrderProcessorService : IOrderProcessor
    {
        [OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
        public void SubmitPurchaseOrder(PurchaseOrder po)
        {
            Orders.Add(po);
            Console.WriteLine("Processing {0} ", po);
        }
    }
}

' This is the hosting application.

Imports System
Imports System.ServiceModel.Channels
Imports System.Configuration
Imports System.Messaging
Imports System.ServiceModel
Imports System.Transactions
Imports System.Runtime.Serialization
Imports System.Collections.Generic

Namespace Microsoft.ServiceModel.Samples
    Friend Class hostApp
        ' Host the service within this EXE console application.
        Public Shared Sub Main()
            ' Get MSMQ queue name from appsettings in configuration.
            Dim queueName As String = ConfigurationManager.AppSettings("queueName")

            ' Create the transacted MSMQ queue if necessary.
            If (Not MessageQueue.Exists(queueName)) Then
                MessageQueue.Create(queueName, True)
            End If

            ' Create a ServiceHost for the OrderProcessorService type.
            Using serviceHost As New ServiceHost(GetType(OrderProcessorService))
                ' Open the ServiceHost to create listeners and start listening for messages.
                serviceHost.Open()

                ' The service can now be accessed.
                Console.WriteLine("The service is ready.")
                Console.WriteLine("Press <ENTER> to terminate service.")
                Console.WriteLine()
                Console.ReadLine()

                ' Close the ServiceHostB to shutdown the service.
                serviceHost.Close()
            End Using
        End Sub
    End Class
End Namespace

// This is the hosting application.

using System;
using System.ServiceModel.Channels;
using System.Configuration;
using System.Messaging;
using System.ServiceModel;
using System.Transactions;
using System.Runtime.Serialization;
using System.Collections.Generic;

namespace Microsoft.ServiceModel.Samples
{
    class hostApp
    {
        // Host the service within this EXE console application.
        public static void Main()
        {
            // Get MSMQ queue name from appsettings in configuration.
            string queueName = ConfigurationManager.AppSettings["queueName"];

            // Create the transacted MSMQ queue if necessary.
            if (!MessageQueue.Exists(queueName))
                MessageQueue.Create(queueName, true);

            // Create a ServiceHost for the OrderProcessorService type.
            using (ServiceHost serviceHost = new ServiceHost(typeof(OrderProcessorService)))
            {
                // Open the ServiceHost to create listeners and start listening for messages.
                serviceHost.Open();

                // The service can now be accessed.
                Console.WriteLine("The service is ready.");
                Console.WriteLine("Press <ENTER> to terminate service.");
                Console.WriteLine();
                Console.ReadLine();

                // Close the ServiceHostB to shutdown the service.
                serviceHost.Close();
            }
        }
    }
}

<!-- This is the app.config for the service -->
<configuration>

  <appSettings>
    <!-- use appSetting to configure MSMQ queue name -->
    <add key="queueName" value=".\private$\ServiceModelSamplesTransacted" />
  </appSettings>

  <system.serviceModel>
    <services>
      <service 
          name="Microsoft.ServiceModel.Samples.OrderProcessorService"
          behaviorConfiguration="CalculatorServiceBehavior">
        <host>
          <baseAddresses>
            <add baseAddress="https://localhost:8000/ServiceModelSamples/service"/>
          </baseAddresses>
        </host>
        <!-- Define NetMsmqEndpoint -->
        <endpoint address="net.msmq://localhost/private/ServiceModelSamplesTransacted"
                  binding="netMsmqBinding"
                  contract="Microsoft.ServiceModel.Samples.IOrderProcessor" />
        <!-- the mex endpoint is exposed at https://localhost:8000/ServiceModelSamples/service/mex -->
        <endpoint address="mex"
                  binding="mexHttpBinding"
                  contract="IMetadataExchange" />
      </service>
    </services>
    
    <behaviors>
      <serviceBehaviors>
        <behavior name="CalculatorServiceBehavior">
          <serviceMetadata httpGetEnabled="True"/>
        </behavior>
      </serviceBehaviors>
    </behaviors>

  </system.serviceModel>

</configuration>

' This is the client code.
'  Copyright (c) Microsoft Corporation.  All Rights Reserved.

Imports System
Imports System.Configuration
Imports System.Messaging
Imports System.ServiceModel
Imports System.Transactions

Namespace Microsoft.ServiceModel.Samples
    'The service contract is defined in generatedClient.cs, generated from the service by the svcutil tool.

    'Client implementation code.
    Friend Class Client
        Shared Sub Main()
            ' Create a client.
            Dim client As New OrderProcessorClient()

            ' Create the purchase order.
            Dim po As New PurchaseOrder()
            po.CustomerId = "somecustomer.com"
            po.PONumber = Guid.NewGuid().ToString()

            Dim lineItem1 As New PurchaseOrderLineItem()
            lineItem1.ProductId = "Blue Widget"
            lineItem1.Quantity = 54
            lineItem1.UnitCost = 29.99F

            Dim lineItem2 As New PurchaseOrderLineItem()
            lineItem2.ProductId = "Red Widget"
            lineItem2.Quantity = 890
            lineItem2.UnitCost = 45.89F

            po.orderLineItems = New PurchaseOrderLineItem(1){}
            po.orderLineItems(0) = lineItem1
            po.orderLineItems(1) = lineItem2

            'Create a transaction scope.
            Using scope As New TransactionScope(TransactionScopeOption.Required)
                ' Make a queued call to submit the purchase order.
                client.SubmitPurchaseOrder(po)
                ' Complete the transaction.
                scope.Complete()
            End Using

            'Closing the client gracefully closes the connection and cleans up resources.
            client.Close()

            Console.WriteLine()
            Console.WriteLine("Press <ENTER> to terminate client.")
            Console.ReadLine()
        End Sub
    End Class
End Namespace

// This is the client code.
//  Copyright (c) Microsoft Corporation.  All Rights Reserved.

using System;
using System.Configuration;
using System.Messaging;
using System.ServiceModel;
using System.Transactions;

namespace Microsoft.ServiceModel.Samples
{
    //The service contract is defined in generatedClient.cs, generated from the service by the svcutil tool.

    //Client implementation code.
    class Client
    {
        static void Main()
        {
            // Create a client.
            OrderProcessorClient client = new OrderProcessorClient();

            // Create the purchase order.
            PurchaseOrder po = new PurchaseOrder();
            po.CustomerId = "somecustomer.com";
            po.PONumber = Guid.NewGuid().ToString();

            PurchaseOrderLineItem lineItem1 = new PurchaseOrderLineItem();
            lineItem1.ProductId = "Blue Widget";
            lineItem1.Quantity = 54;
            lineItem1.UnitCost = 29.99F;

            PurchaseOrderLineItem lineItem2 = new PurchaseOrderLineItem();
            lineItem2.ProductId = "Red Widget";
            lineItem2.Quantity = 890;
            lineItem2.UnitCost = 45.89F;

            po.orderLineItems = new PurchaseOrderLineItem[2];
            po.orderLineItems[0] = lineItem1;
            po.orderLineItems[1] = lineItem2;

            //Create a transaction scope.
            using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required))
            {
                // Make a queued call to submit the purchase order.
                client.SubmitPurchaseOrder(po);
                // Complete the transaction.
                scope.Complete();
            }

            //Closing the client gracefully closes the connection and cleans up resources.
            client.Close();

            Console.WriteLine();
            Console.WriteLine("Press <ENTER> to terminate client.");
            Console.ReadLine();
        }
    }
}

<!-- This is the app.config for the client app -->
<configuration>
  <system.serviceModel>
    <client>
      <!-- Define NetMsmqEndpoint -->
      <endpoint address="net.msmq://localhost/private/ServiceModelSamplesTransacted" 
                binding="netMsmqBinding" 
                contract="Microsoft.ServiceModel.Samples.IOrderProcessor" />
    </client>
  </system.serviceModel>
</configuration>

Voir aussi

Partager via

Comment : échanger des messages en file d'attente avec des points de terminaison WCF

Pour utiliser la mise en file d'attente dans un service WCF

Pour créer un client pour le service mis en file d'attente

Exemple

Voir aussi

Tâches

Référence

Concepts

Autres ressources

Ressources supplémentaires